Transcript
3
Table of Contents Page Package Contents ............................................................. 3 Introduction ...........................................................................4 Installation......................................................................... 5 Remote Control ................................................................. 6 Specifications ................................................................... 7 Information ........................................................................ 7
Package Contents • HDMI 2-to-1 Audio Video Switch
EN
• IR Extender
FR
• Infrared Remote Control • User Manual
DE NL
IMPORTANT NOTE: Use only HDMI Interface-compatible cables.
ES
Use only HDMI or HDMI to DVI cables, which are authorized by HDMI Licensing, LLC (USA), as licensed under the HDMI Specification (1.1 or later) of the HDMI Adopter Agreement.
IT
All Pure AV HDMI Cables comply with or exceed these international specifications, and are recommended for best results. Failure to use approved cables may result in a void of warranty.
PL CZ SK RU 4
Introduction Congratulations and thank you for purchasing the HDMI 2-to-1 Audio Video Switch. This unit allows you to connect and switch between two separate high-definition digital video sources into one HDMI* or DVI** connection on your HDTV. *HDMI is the first industry-supported, full-digital format with HDTV connectivity. Its exceptionally wide bandwidth of 2.25Gbps permits the transmission of up to 1080p video signals, along with eight channels of high-resolution digital audio. It also contains a bidirectional data bus, which supports picture format settings, and features HDCP (High-Definition Content Protection) compliance. **Although there are only HDMI connections on this device, you can use an HDMI to DVI cable to connect and switch between DVI components.
Benefits • Connects 2 HD video sources into 1 HDMI port on your HDTV • Supports 480i, 480p, 720i, 720p, 1080i, and 1080p resolutions • Maintains highest HDMI single-link video resolution • Works with HDCP-compliant devices • Connects and switches both HDMI and HDMI to DVI cables • Selects inputs from the IR remote controller (supplied) or via the front-panel “Input Select” button
5
Installation Mount the HDMI 2-to-1 Video Switch away from sources of electromagnetic or radio frequency interference, and also away from heat and moisture.
Front Panel
Out to Display Device/HDTV
Input Select Button
IR Connector for IR Extender (supplied)
EN FR
Back Panel
DE NL ES IT PL In from HD Digital Video Sources,
CZ
such as
SK
HD-DVD, Blu-ray®, and DVD Players, Cable/Satellite Set-Top Boxes, Entertainment Computers
RU 6
Specifications Input Connector Type .................................. HDMI Output Connector Type ............................... HDMI Dimensions (LxWxH) .................................... 8 cm x 44.2 cm x 2 cm Product Weight (Net) ................................... 78 g
Information Europe-European Union Notice Products with the CE marking comply with the EMC Directive (89/336/EEC) issued by the Commission on the European Community. Compliance with these directives implies conformity to the following European Norms (in brackets are the equivalent international standards). • EN 55022 - Electromagnetic Emissions • EN 55024 - Electromagnetic Immunity
EN FR DE NL
Following information is only for EU-member states: The use of the symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product,. For more detailed information about recycling of this product, please visit our web at www.belkin.com/environmental (or contact your local city office, your household waste disposal service or the shop where you purchased the product)
ES IT PL CZ SK RU 8
Information
(continued)
Belkin International, Inc. Manufacturer’s Lifetime Warranty What this warranty covers? Belkin International, Inc. warrants to the original purchaser of this Belkin product that the product shall be free of defects in design, assembly, material, or workmanship. What the period of coverage is. Belkin International, Inc. warrants the Belkin product for the lifetime of the product. What will we do to correct problems? Product Warranty. Belkin will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product). What is not covered by this warranty? All above warranties are null and void if the Belkin product is not provided to Belkin International, Inc. for inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin International, Inc. determines that the Belkin product has been improperly installed, altered in any way, or tampered with. The Belkin Product Warranty does not protect against acts of God such as flood, earthquake, war, vandalism, theft, normaluse wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (i.e. brownouts or sags), non-authorized program, or system equipment modification or alteration. How to get service. To get service for your Belkin product you must take the following steps: 1. Contact Belkin Ltd, Express Business Park, Shipton Way, Rushden, NN10 6GL, United Kingdom, Attn: Customer Service, or call 0845 - 607 77 87 within 15 days of the Occurrence.
9
Information
(continued)
Be prepared to provide the following information: a. The part number of the Belkin product. b. Where you purchased the product. c. When you purchased the product. d. Copy of original receipt. 2. Your Belkin Customer Service Representative will then instruct you on how to forward your receipt and Belkin product and how to proceed with your claim. Belkin International, Inc. reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin International, Inc. for inspection shall be borne solely by the purchaser. If Belkin determines, in its sole discretion, that it is impractical to ship the damaged equipment to Belkin International, Inc., Belkin may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment. The cost, if any, of shipping the equipment to and from such repair facility and of such estimate shall be borne solely by the purchaser. Damaged equipment must remain available for inspection until the claim is finalized. Whenever claims are settled, Belkin International, Inc. reserves the right to be subrogated under any existing insurance policies the purchaser may have.
EN FR DE NL ES IT PL CZ SK RU 10
Notes
11
