Preview only show first 10 pages with watermark. For full document please download

Inline Surge Protectors Are

   EMBED

Share

Transcript

DITEK’s DTK-iBNC Series inline surge protectors are designed to protect externally-mounted cameras where a dedicated ground connection is unavailable. The iBNC diverts transient surges through the coaxial shielding, protecting the video feed without introducing ground loops. Solid performance and easy installation make the DTKiBNC Series a favorite among CCTV integrators. DTK-iBNC2.8 Technical Specifications Product Features Part Number:  Protects fixed or Coaxitron (PTZ) camera video feeds Service Voltage:  Small footprint makes installation easy  Recommended for applications where AC power is already protected and ground is unavailable DTK-iBNC2.8 DTK-iBNC6.8 1V peak-peak 5VDC Clamping Voltage: 2.8VDCV Protection Modes: Center Pin – Shield Surge Current Rating: Band Pass Range: Insertion Loss: Return Loss: Selection Guide: Impedance:  Fixed cameras: Mechanical Characteristics DTK-iBNC2.8  Coaxitron cameras: DTK-iBNC6.8 Connection Method: Housing: Operating Temperature: Dimensions: Weight: 20,000A 8/20 µs impulse 0Hz-10MHz <0.3dB/Channel 22dB RL @ 10MHz 75 Ohms BNC Female In/Out Aluminum -40°F - 158°F (-40°C - 70°C) 3.6”L x 1.1DIAMETER (91mm x 28mm) 2.5oz (71g) Quality, Standards & Approval Agency Approvals: Warranty: UL497B Ten Year Limited Every precaution has been taken to ensure that this literature is accurate and complete. DITEK Corporation assumes no responsibility and disclaims all liability for damages resulting from the use of this information or for any errors or omissions. One DITEK Center 1720 Starkey Road - Largo, FL 33771 Phone: 1-800-753-2345 Direct: 727-812-5000 Technical Support: 1-888-472-6100 www.ditekcorp.com Doc. Number: SPS-100038-001 Rev 6 03/15 ©2015 DITEK Corp. Page 1 of 1