Transcript
Innova-Oraltronics Implant Systems
A Endopore One-Stage
fter years of research and development, Innova entered the dental implant market in 1995 with a unique patented dental implant system. Innova has enjoyed tremendous success in serving the healthcare community around the world. The company pursues new and complementary medical device technologies and products that leverage its existing marketing structure and enhance its industry reputation. In 2004, Innova was acquired by the Sybron Dental Specialties, greatly enhancing Innova's R&D resources and potential for growth. The Endopore® Implant System was developed at the University of Toronto in 1983. Innova offers the Endopore Implant System with three types of implants: a one-stage internal Morse taper, an internal hex and an external hex implant. Other Innova implants systems are the Entegra®, a threaded external hex, the Pitt-Easy®, a self-tapping internal hex and the new internal connection Anatomic ® with an asymmetrical design replicating the form and structure of natural dentition. n Endopore 4.1 & 5.0 — 4.8 platform, One-Stage Internal Morse Taper n Endopore 4.1 & 5.0 — 4.1 & 5.0 platform, Internal Hex n Pitt-Easy 3.25, 3.75, 4.0, 4.9, Internal Hex
n Endopore 3.5, 4.1, 5.0 — 3.5, 4.1 & 5.0 platform, External Hex Endopore Int. Hex
n Entegra *3.25, 4.1, 5.0 — 3.5, 4.1 & 5.0 platform, External Hex (*see note below) n Anatomic, anterior wide, anterior narrow, posterior, Internal Connection
Compatible components for the Endopore External Hex 4.1 and Entegra 4.1 are compatible with the Branemark Regular Platform and can be found in the Branemark section (regular platform) of the manual. Compatible components for the Endopore External Hex 5.0 and the Entegra 5.0 can be found in the 3i 5.0 section. Compatible components for the Endopore One-Stage can be found in the ITI® standard section (Standard 4.8 Morse taper). Pitt-Easy Int. Hex
Innova Implants
Restoratively Compatible To
One-Stage Internal Connection:
n Endopore One-Stage internal Morse Taper 4.8 platform
ITI® Standard 4.8 Morse Taper 3i Osseotite® TG 4.8 Morse Taper
Two-Stage Internal Hex:
n Endopore 4.1 & 5.0 internal hex
n Pitt-Easy internal hex connection
none none
Endopore Ex Hex
Two-Stage External Hex:
n Endopore 3.5 external hex 3.5 platform n *Entegra 3.25 (03M) external hex 3.5 platform n Endopore 4.1 external hex 4.1 platform n Entegra *3.25 (03B) & 4.1 external hex 4.1 platform Refer to Branemark section for compatible components.
Entegra Ex Hex
n Endopore & Entegra Wide Diameter 5.0 ex hex
Entegra 3.25 external hex Endopore 3.5 external hex Branemark®, Regular Platform 4.1 Restore® RD & Sustain® RD Taper-Lock® 3i® Wide Diameter
Internal Connection:
n Anatomic internal connection Available in anterior wide, anterior narrow and posterior
Anatomic Internal
none
*NOTE: The Entegra 3.25 is available in 2 platforms: The 1st series (03M-range red labeled box) has a 3.5 platform. The 2nd series (03B-range green labeled box) has a 4.1 platform. Refer to www.innovalife.com for more information.
All product names referenced herein are trademarks of their respective companies, refer to inside back cover of this manual. © Copyright 2007 Attachments International, Inc., San Mateo, CA
306
Terminology of Components
Restorative Components: The restorative components are the elements used to fabricate a restoration that will be connected to the implant(s). The restoration may also be attached to an intermediate component called a tissue extension or abutment which in turn is connected to the implant(s).
Implant Body: The implant body is placed into the bone for approximately 4-6 months to allow for osseointegration. The implants should not be loaded prior to osseointegration.
Endopore Ex Hex
Tissue Extension: The TE (Tissue Extension), also referred to as the abutment, is the intermediate connector between the implant and the restoration, it may extend above the tissue. In some instances, a TE extension is subgingival, to provide a more esthetic restoration.
Angled Hex Abutment
Compatibility: Innova Implants
Restoratively Compatible To
One-Stage Internal Connection:
n Endopore One-Stage internal Morse Taper 4.8 platform
ITI Standard 4.8 Morse Taper 3i Osseotite TG 4.8 Morse Taper
Two-Stage Internal Hex:
n Endopore & Endopore Hybrid 4.1 & 5.0 internal hex n Pitt-Easy internal hex connection
none none
Two-Stage External Hex:
n Endopore 3.5 external hex 3.5 platform n *Entegra 3.25 (03M) external hex 3.5 platform n Endopore 4.1 external hex 4.1 platform n Entegra *3.25 (03B) & 4.1 external hex 4.1 platform Refer to Branemark section for compatible components.
n Endopore & Entegra Wide Diameter 5.0 ex hex
Entegra 3.5 external hex Endopore 3.5 external hex Branemark, Regular Platform 4.1 Restore RD & Sustain RD Taper-Lock 3i Wide Diameter
n Anatomic internal connection Available in anterior wide, anterior narrow and posterior
none
*NOTE: The Entegra 3.25 is available in 2 platforms: The 1st series (03M-range red labeled box) has a 3.5 platform. The 2nd series (03B-range green labeled box) has a 4.1 platform. Refer to www.innovalife.com for more information.
All product names referenced herein are trademarks of their respective companies, refer to inside back cover of this manual. © Copyright 2007 Attachments International, Inc., San Mateo, CA
307
INNOVA-ORALTRONICS
Internal Connection:
