Ins-30155-eng - Acu Net2 Plus Poe

Transcript

Paxton 16/05/2011 Ins-30155 12V DC PoE+ power supply in cabinet with Net2 plus Technical Support 01273 811011 [email protected] Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT) Saturday from 09:00 - 13:00 (GMT) Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/ Overview The PoE (Power over Ethernet) supply is designed to draw power from a network cable that is provided with a remote PSE (Power source equipment), compliant to either to the IEEE 802.3af or IEEE802.3at standard. This unit splits Ethernet data from the DC voltage. The voltage is available at two power connectors as 12v DC and the data is passed unaltered to the Ethernet Out port. Set Intruder Alarm +V out Red LED Amber LED Data/D0 Reader 2 Green LED Relay 1 123456 LABEL HERE 00-01-02-03-04-05 N.O. N.C. N.O. COM OFF ON Server Connected RS485 Network CAT5 Cable Coding Tx Rx Orange Green Wht/Grn Wht/Orng 10/100 Ethernet 0V PSU 0V 0V 12V PoE+ PoE+ splitter power supply Supports: IEEE 802.3 af IEEE 802.3 at Green LED Exit Contact 0V 0V INPUT Tamper PSU Tamper Switch Ethernet data 1. 2. 3. 4. 5. Power 0V End of Line Termination 10 Server Link 100 Installation +12V DC 12V Screen or spare cores from data cable 0V out 0V Alarm Clock/D1 Media Detect 12V 0V Out COM Exit Button 0V out PLACE SERIAL 12345612 NUMBER Inputs Media Detect Caution: For 12V DC readers only Clock/D1 Contact Data/D0 12V 0V Out 0V N.C. Outputs Green LED http://paxton.info/107 Relay 2 Net2 plus Reader 1 Amber LED PSU/Tamper Red LED 12V 0V 12V Power 0V COM Arm +V out N.O. Expansion Sense Layout 12V This allows a Net2 plus to receive its power and data over a single cable connection without the need for an additional power supply. OUTPUT Ethernet Out AC 100-240V 50 / 60 Hz 1.2A DC 13.8V 2A PoE In Combined data and power PSE (Power source equipment) Connect the network cable to PoE In. The Power LED will illuminate if power is available on this data line. The PoE+ LED will illuminate if the power meets the IEEE 802.3at (type 2) standard. 12V DC power is available at the two output connectors. Network data is available at 'Ethernet Out' Page 1 25 mm 116 mm Fitting 1. Screws and wall plugs are provided in a fitting kit. With reference to the diagrams, determine where the top, central mounting position is required and drill a hole suitable for a No 8 wall plug. 2. Tap in one of the wall plugs. 3. Put in one of the long screws, leaving a suitable gap to the wall surface in order to slot the cabinet over it. 320 mm Metal Cabinet 268 mm 4. Mark the hole positions for the lower 2 screws. 5. Remove the cabinet and drill the additional holes. 6. Tap in the 2 wall plugs and hang the cabinet back onto the top screw. 7. Secure the cabinet with the 2 lower screws. 68 mm 68 mm 8. Tighten the top screw. 136 mm 232 mm 18 mm 118 mm 320 mm Plastic Cabinet 284 mm 98 mm 98 mm 196 mm 236 mm Page 2 Status Lights Power This LED is on when the input supply is healthy. PoE+ This LED is on when the unit is operating in 802.3at type 2 (PoE+) mode Specifications PSU Electrical Max Min 12V Output voltage 13.35V DC Load output current (PoE+ 802.3at type 2) 1.5 A Load output power (PoE+ 802.3at type 2) 20.4 W Load output current (802.3af - 802.3at type 1) 0.8 A Load output power (802.3af - 802.3at type 1) 10.36 W Input supply voltage 36V DC 57V DC 0.83 A Input supply current Environment Operating temperatures - all items Min Max 0 °C +49 °C Waterproof No Width Height Depth Metal Cabinet 232 mm 320 mm 80 mm Plastic Cabinet 236 mm 320 mm 80 mm Dimensions WARNINGS :The following warnings and instructions MUST be adhered to. Read the instructions before installing and powering the equipment. Keep the instructions in a safe place for future reference. :RECEIVING INSPECTION- Remove any traces of packing material from the unit as such debris may create a fire or shock hazard. Unpack the unit with care and inspect for transit damage. If damage is suspected, the unit must not be used or tested, but should be returned to Paxton for investigation and the damage reported to the carrier. :INSTALLATION- Only qualified and trained personnel, familiar with this type of product and who fully understand these instructions should install, connect or test this equipment. There are no user serviceable parts within the PSU unit. :- The equipment is intended for indoor use only in dry locations. :- This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. The declaration of conformity is available on request. Contact details are provided at: http://paxton.info/596 This product is not suitable for retail sale. All warranties are invalid if this product is not installed by a competent person. Page 3