Transcript
To operate the clock: When the clock is plugged in, the correct time will be displayed after a few seconds. The clock will automatically indicate the AM/PM time. When the light is on, this indicates PM.
Insta-Set Instruction Manual Model 40010 1
Select the time zone: Slide the time zone switch to display the time in the desired time zone. The default time zone is Eastern Standard Time (EST) Insta-Set
2 5
6
4
7 MST PST
3
CST EST
ON A LAR M O FF
8
T DS
+
M AR AL
SNOOZE
9
11 10
Clock must be plugged in when replacing the button cell battery.
1. 2. 3. 4. 5. 6.
PM indicator ALARM indicator ALARM set button DST on/off button TIME zone switch ALARM on/off switch
Setting Day-light Savings Time (DST): The clock has DST in the ON position as the default. This setting is correct unless you live in Arizona or parts of Indiana. To change the DST to OFF, press the “DST SET” button once and either “don” (DST is ON) or “doF” (DST is OFF) appears. In a few seconds the time will be displayed. Do not change this setting unless you live in an area which does not observe the Daylight Savings time change. DST starts: First Sunday in April at 2am. Example: 2am to 3am (+1 hour) DST ends: Last Sunday in October at 2am. Example: 2am to 1am (-1 hour) Displaying the12/24 hour, Date, Month and Year: Display the 12/24 hour by hold the “+“ button for 2 seconds. To display the date, month and year by press the “-“ button, the year appear and then if press again, the month and date (eg. “12 31” means Dec 31) appear. Setting the Alarm: To set the alarm, press the ALARM SET button once, press either “+” or “-” button to the correct hour (Be sure that the AM/PM is correct). Press the Alarm button once again and press either “+” or “-” button to the desired minute
7. TIME backward (-) button 8. TIME forward (+) button 9. SNOOZE bar 10. 9V battery backup 11. Insta-Set button cell battery
Operate the Alarm and Snooze: Slide the ON/OFF switch to the ON position. This clock has a crescendo alarm. The alarm will start softly and increase in loudness and number of beeps to gently awaken you. When the crescendo alarm sounds, press the snooze bar to get an extra 10 minutes of sleep. The snooze may be repeated up to four times. To reset the alarm for the next day, momentarily press the ALARM SET button. To shut off the alarm for
longer times, slide the ON/OFF switch to the OFF position. Insta-Time Incorrect: If for some reason the Insta-Set time is incorrect or lost, press and hold the DST button for 5-7 seconds, and the hour digit will begin to blink, then press the “+” or “-” button to set the hour (be sure the AM/PM is correct). Press the DST button again to set the minutes by pressing the “+” or “-” button. Press the DST button again to set the month, again to set the day, again to set the year, and once more to secure all in the memory. No Time Displayed When Plugged into the AC Power: If the display is blank when plugged into the AC outlet, unplug from the AC power and remove the Insta-Set battery (lithium button cell), then plug back into the AC power again. In a few seconds, the display will be ON, and then press the DST button to display 12:00. Now repeat the procedure to reset the real time memory above. After you have completed the time setting procedure, insert the Insta-Set battery (lithium button cell) and the time will be automatically stored in the clock.
One Year Warranty (U.S.A.) Equity products are warranted for one year from the date of consumer purchase against defects in material and workmanship. During this period such defects will be repaired, or the product will be replaced at Equity’s option, without charge. This warranty does not cover damage caused by misuse or negligence. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OR FITNESS AND MERCHANTABILITY, ARE LIMITED IN DURATION TO A PERIOD ENDING ONE YEAR FROM DATE OF PURCHASE. Some states do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from State to State. If your clock isn’t working, send it with a letter explaining the problem and $5.00 for postage and handling to: Customer Service Dept., Equity Industries Corp., 5721 Bayside Road, Virginia Beach, VA23455, U.S.A.
Battery Backup (Battery not included): Install one 9V alkaline battery in the rear compartment using the battery connecter. Note this battery can be installed without disconnecting the clock power. If the power fails, the battery back up will automatically continue the time and alarm operation but the display will disappear. During a power outage, the alarm will sound at the set time. The duration for the battery backup is 12 Hours. When the power is restored the display digits will reappear with the correct time. Insta-Set Battery replacement: A backup button cell battery that will last up to 3 years maintains the Insta-Set real time. To maintain the Insta-Set feature, we recommend this button cell battery be replaced approximately every 3 years. The replacement battery is a CR2032 (3V) button cell battery that is available at most stores that carry the button cell batteries. We recommend buying the name brand CR2032 (lithium) button cell battery (ie. Maxell, Toshiba, Mitsubishi, Sanyo, Sony & Panasonic etc.). When changing the battery, the AC power must be on or have a 9V battery installed. However, if you do lose the Insta-Time, please see the procedure to reset the real time memory above.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN
!
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user of the presence of uninsulated “dangerous voltage” within the product’s enclosure: that may be of sufficient magnitude to constitute a risk of electric shock to person.
!
The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE
