Transcript
NDS-870 HD
INSTA LL GUIDE HDBA SET™EXTENDERS
Tx
NDS-871HD-TX
NDS-872HD-RX
LINK HDCP
LINK HDCP
Rx
Tx
Rx
NDS-872HD-RX
NDS-871HD-TX
RS232
IR In
IR Out
HDMI In
HDBaseT Out
DC 24V
RS232
IR In
IR Out
HDMI Out
HDBaseT In
DC 24V
NDS-870 HD
CONTENTS INTRODUCTION ..................................................................0 2
THA NK YOU FOR PURCHA SING THIS PRODUCT. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
KEY FEA TURES......................................................0 2
DESCRIPTION NDS-871HD-T X....................................0 3
SURGE PROTECTION DEVICE RECOMMENDED
DESCRIPTION NDS-872HD-RX..................................0 3 INSTA LLA TION INSTRUCTIONS..............................0 4 QUICK SETUP GUIDE...........................................0 4
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment.
A BOUT HDBaseT™CA BLING...........................0 4
CONTROL PORTS CONFIGURA TION..................0 5 IR CONTROL...........................................................0 5 RS232 CONTROL...................................................0 5
SPECIFICA TIONS...............................................................0 6
SA FETY A ND PERFORMA NCE NOTICE Do not substitute or use any other power supply other than the enclosed unit, or a Absolute Acoustics®approved replacement.
PA CKA GE CONTENTS....................................................0 7 W A RRA NTY NOTICE This product is covered by a two year limited warranty. Absolute Acoustics®warrants to the original purchaser that this product is functional and free from defects in materials and workmanship for the period of two year from date of purchase. To obtain warranty service please contact Absolute Acoustics® one of its o cial distributors for further instruction. Proof of purchase including date, and an explanation of complaint is required for warranty service.
DISCLA IMER NOTICE All brand names, product names or trademarks are property of their respective owners. Some trademarks may be mentioned to refer to the entities that own such marks, names or their products. Absolute Acoustics® has no interest in the ownership of trademarks and trade names. Absolute Acoustics®is not responsible for errors in typography or photography and, in order to improve its products, reserves the right to change speci cations without notice.
NDS-870 HD
Int rod uct ion Absolute Acoustics®NDS-870HD is a Class B HDMI over HDBaseT™extender set capable of transmitting HDMI and control signals for distances up to 328ft (100m) over a single twisted-pair cable. NDS-870HD is capable to extend 1080p or 4K/UHD video up to 328ft (100m) with embedded multi-channel audio, RS232 and bi-directional IR control signals. Both TX and RX units can be remotely powered by PoC technology (a single power supply is required), cleaning up the installation.
KEY FEA TURES Transmission of HDMI, control signals and electrical power for distances up to 230ft (70m) at 1080p resolutions, or 130ft (40m) at 4K/UHD resolutions over a single twisted pair cable. Compatible with the new ultra-high de nition sources and displays, sending signals with resolutions up to 2160@30 with YCbCr 4:4:4, or 2160@60 with 4:2:0 color format; Fully licensed and compatible with HDCP 2.2, the latest content protection speci cation, enabling the transmission of ultra-high de nition signals directly from the source;
Allow the pass-thru of HDMI-CEC commands, enabling user to control the entire system with a single remote; IR and RS232 extension ports, allowing long-range control signals transmission over a single cable; HDBaseT™outputs provides electrical power supply to the remote receiver units through the same CAT cable, making the deployment process much easier; Slim design, allowing easy installation behind TVs or in furniture.
NDS-870 HD
Descrip t ion NDS-871HD-TX
1
LINK HDCP
Rx
Tx
2
3
4
1. Link, HDCP and power status indicators 2. RS232 extension port 3. IRinput/output extension ports
5
6
4. HDMI input port 5. HDBaseT output port 6. DC power supply inlet
Descrip t ion NDS-872HD-RX 1
LINK HDCP
Rx
Tx
2
3
1. Link, HDCP and power status indicators 2. RS232 extension port 3. IRinput/output extension ports
4
5
6
4. HDMI output port 5. HDBaseT input port 6. DC power supply inlet
NDS-870 HD
Inst allat ion Inst ruct ions QUICK SETUP GUIDE 1. Begin with the NDS-870HD units and all external devices turned o and with power cables removed.
W arning
2. Place the NDS-871HD-TX and NDS-872HD-RX units at the installation site, respecting the minimum spaces for ventilation.
All devices should be unplugged from electrical supply prior to begin the installation. Damages caused due to misuse are not covered by the product warranty.
3. Connect the source device to the input port of the NDS-871HD-TX unit, and the HDMI display to the HDMI output port of the NDS-872HD-RX unit.
Tip
4 . Connect the HDBaseT™link cable between the TX and RX unit, using a quality twisted pair cable.
Before permanently securing the unit for nal installation, test for proper operation of the unit and cables in your system.
5. [Optional] Connect the control system IR and RS232 ports to the matching ports of NDS870HD units. 6 . Connect power to the NDS-871HD-TX or NDS-872HD-RX units. The other unit will be feed by Power over Cable technology. 7. Connect external devices to the power supply and turn they on. 8. Perform usability tests and validate the installation.
A BOUT HDBA SET™CA BLING Sending HDMI signals (specially at 4K/UHD resolutions) through HDBaseT™technology is highly sensitive to the quality of cabling and installation techniques. Thus, we strongly recommend the use of solid conductors CAT6 twisted-pair cables (or higher). The transmission distances for each kind of cable are listed in the table below.
Cab le Typ e
Resolut ion
Dist ance
CA T5e/ 6
10 80 p
328ft ( 10 0 m )
4 K/ UHD
230 ft ( 70 m )
10 80 p
328ft ( 10 0 m )
4 K/ UHD
328ft ( 10 0 m )
CA T6a/ 7
Note: The distances in the table above are consistent with ideal installation conditions. In a real application, the transmission distances may vary due to installation conditions. Always work with a safety factor.
1
For termination, the 568B standard is recommended use the appropriate connector with its matching cable.
8 EIA / TIA-568B
NDS-870 HD
Cont rol Port s Confi g urat ion IR CONTROL IR Input ports of Absolute HDBaseT® transmitters can be used for signal extension, carrying the input signal to IR Output port on remote HDBaseT™receiver unit. The connection cable between unit and the IR emitter equipment must be assembled with the following con guration:
Signal Ground 12V
Signal Ground
IRin
IRout
RS232 CONTROL RS232 ports of NDS 570HD can be used for signal extension, carrying the signals from the local port to the matching port on remote unit. The connection cable between unit and the RS232 sender equipment must be assembled with the following con guration:
TX GND RX
NDS-870 HD
Sp ecifi cat ions
NDS-871HD-TX SIGNA L BA NDW IDTH
HDMI COMPA TIBILITY
NDS-872HD-RX
10 .2 Gb p s
CEC, EDID, HDCP 2.2
SUPPORTED RESOLUTIONS1
80 0 x60 0 , 10 24 x768, 1280 x768, 1280 x960 , 1280 x10 24 , 160 0 x120 0 , 1920 x10 80 , 1920 x120 0 , 384 0 x2160 , 4 0 96x2160
COLOR DEPTH2
8 - 12 bit s/ ch
COLOR FORMA TS
RGB, YCbCr 4 :4 :4 , YCbCr 4 :2:2, YCb Cr 4 :2:0
SUPPORTED A UDIO FORMA TS
Dolby At m os, Dolby TrueHD, Dolby Dig it al Plus, Dolby Dig it al, DTS-X, DTS-HD Mast er A ud io, DTS 5.1, PCM 2 - 8 Ch.
CONTROL SIGNA LS EXTENSION MA XIMUM TRANSMISSION DISTA NCE
TECHNOLOGY
CONNECTIONS
OPERA TING TEMPERA TURE DIMENSIONS
W EIGHT
POW ER SUPPLY
POW ER CONSUMPTION
NOTES
Bi-direct ional IR, RS232
328ft (10 0 m ) over CAT5e/ 6/ 6a/ 7 cable
Class A HDBaseT™chip set
Class A HDBaseT™chip set
1x HDMI inp ut
1x HDMI out put
1x HDBaseT out p ut 1x IR inp ut
1x HDBaseT inp ut 1x IR inp ut
1x IR out p ut
1x IR out p ut
1x RS232 p ort
1x RS232 p ort
1x Pow er p ort
1x Pow er p ort
32° t o 10 4 ° F (0 ° - 4 0 °C)
32° t o 10 4 ° F ( 0 ° - 4 0 °C)
4 .53x0 .63x3.26in ( 115x17x84 m m )
4 .53x0 .63x3.26in (115x17x84 m m )
0 .33lb ( 0 .15kg )
0 .33lb ( 0 .15kg )
24 V DC @ 2A
24 V DC @ 2A
11W p er TX/ RX pair
11W p er TX/ RX p air
1. 384 0 x2160 and 4 0 96x2160 resolut ions are only supp ort ed w it h YCb Cr 4 :2:0 Color Form at . 2. 384 0 x2160 and 4 0 96x2160 resolut ions are only supp ort ed w it h in 8 b it / ch Color Dep t h.
NDS-870 HD
Packag e Cont ent s NDS-871HD-TX 1x NDS-871HD-TX 1x 24V DC @2A power supply 4x Regional adapter plugs 4x Rubber feet 1x Warranty certi cate
NDS-872HD-RX 1x NDS-872HD-RX 4x Rubber feet 1x Warranty certi cate
