Preview only show first 10 pages with watermark. For full document please download

Install Guide-speed Dome-n5011_n5012_v03.ai

   EMBED

Share

Transcript

Speed Dome Network Camera ConnecƟon Diagram External I/O Connector LAN Socket Micro SD Card Slot (SDHC up to 32GB) AC/DC Power Inlet RESET Button 5 seconds Connect the product to the switch hub and PC. 1 3 Connecting up Use a network cable and plug it in the LAN port of the product. Plug the other end of the cable in the LAN port of the hub. Prepare the product, your PC and switch hub ready for connection.Make sure that your PC has a LAN port available for connection to the network cable of the product. 2 External I/O setting Connect the switch hub to your PC Connect to the power outlet ● ● Pin 1 Audio in Pin 2 Audio out Pin 3 GND Pin 4 GND Pin 5 DC 12V out Pin 6 RS485+ Pin 7 RS485Pin 8 Alarm Out NO Pin 9 Alarm Out COM Pin 10 Alarm Out NC HUB Pin 11 Alarm K (Alarm in) Pin 12 Alarm A (Alarm in) Connect with your power adaptor directly using the wisted pair (not supplied) after plug the supplied 2pin connector into J20 as shown. 5 MIC ● ● ● Speaker DC out (12V) ● High dB alarm ● Alarm IR Infrared receiver Turn on the power Turn on the power of the PC and hub. ● J20 4 ● Power PC Plug the External I/O connector Plug the supplied external I/O connector into J17 as shown. J17 Twisted-Pair (Not supplied) RMIM-01G05038 Ver:03 ● Power Network Camera ● PC ● HUB For more information, please refer to the attached CD. Speed Dome Network Camera Hardware InstallaƟon Package Contents 1 Start the Installation Use the screwdriver to lock the camera securely after remove the EPE. 2 Housings Installation EPE Wall Mount Bracket 3 Use the screwdriver to lock the bracket and Pedestal securely after the I/O cables are put into the bracket. 4 Stabilize the Hardware 5 Tripod Mounting ng Cable Glands Unlock / Lock 1.Unlock 2.Lock Network Camera 4 RMIM-01G05038 Ver:03 3 2 1 For more information, please refer to the attached CD.