Transcript
AUDIO RECORDER INSTRUCTIONS • Install two AA batteries in the recorder’s rear sliding compartment. An on-screen indicator will display the battery level. • Insert a microSD card facedown into the right side panel until it clicks into place. • To turn on the recorder, press Home for about two seconds. • To prepare to record, press Record. The recorder will enter standby mode. Write down the file name of the recording for reference. • With the recorder in standby mode, set the input level to “auto.” From the home screen, press Quick, select “level control,” then press Play. Press + and − to select “auto levels,” then press Play. An icon in the upper-left corner of the display will indicate that the recorder is in auto level mode.
• Place the recorder as close to the subject as possible, with one microphone facing him or her and one facing you. Eliminate background noise if possible. • Press + and − to adjust the volume. • To begin recording, press Record again. The red indicator will light continuously. • To stop recording, press Stop/Home. The audio file will be saved. • To play back a file, press Forward and Back to find the file, then press Play. • To delete a file, press Forward and Back to locate the file. Then press Quick and Play to delete. Confirm the deletion, and press Play again. • To turn off the recorder, hold down Home for about two seconds. • To download your audio files, connect the recorder to a computer with the included USB cable.
© 2013 by Intellectual Reserve, Inc. All rights reserved. Printed in the USA. English approval: 2/13
