Transcript
Installation 850-930 MHz
CD1515 Elevated Feed Antenna
The CD1515 elevated feed antenna is specially designed to be mounted in locations where a roof mount or glass mount antenna are not desired or will not provide adequate performance. The antenna can be used with or without any of the optional mounting kits shown below and mounted on the vehicle gutter, fender, trunk or other locations where roof mount antenna performance would be severely degraded.
Component Listing
Whip & Ferrule M-1538
When choosing a mounting location try to ensure that the whole of the antenna, and in particular the whip top itself, is as high as possible and as far away as practical from metallic obstructions (e.g. roof racks or vehicle pillars). When mounted in a vertical position well removed from such obstructions the antenna will provide excellent omnidirectional performance.
Base Assembly M-1535
Specifications: Frequency: Gain: Power Rating: Tuning: Impedance: Radiator: Mount: Tuned bandwidth:
850-930 MHz 1.5 dB 40 watts continuous Pre-tuned at factory 50 ohms nominal Precipitation hardened stainless steel Stud 14mm diameter Entire specified bandwidth under 1.9:1
Mounting Options
Spring SK-851
Angle Adjuster FK-851
Magnetic Base MK-850
Gutter Mount GM7
www.rfindustries .com.au Doc Ref:INS-36593-1
©1995 R F Industries Pty Ltd
