Transcript
LOGIPIX IP VIDEO SURVEILLANCE SYSTEMS
INSTALLATION GUIDE Logipix Network Video Recorder Rack-mount Enterprise design: LNVR-16-8-E Document version: 3.0
Contact E-mail:
[email protected] Technical support:
[email protected] Web: www.logipix.com
Installation Guide
Table of Contents Important Information.................................................................................3 Package contents..........................................................................................5 Necessary Tools, Cables and Devices.........................................................................5
Hardware overview......................................................................................6 Front view..................................................................................................................6 Rear view...................................................................................................................8 Cooling.......................................................................................................................8 Weight and Dimension..............................................................................................9 Specifications.............................................................................................................9
Installation..................................................................................................12 Installation steps......................................................................................................12 Install the HDDs.......................................................................................................12 Mounting the LNVR into the rack cabinet...............................................................13 Connecting external batteries.................................................................................13 Connecting to the network......................................................................................14 Connecting the Logipix cameras to the LNVRs........................................................15 Connecting the power and power on......................................................................16 Checking LED information.......................................................................................16
2/17
Installation Guide
Important Information Please provide this manual to the owner of the equipment for future use. Follow the security instructions below and use the device only according to these to avoid any injuries, fatal accidents or material damage! • For indoor use only. • A person with the appropriate qualification is required to install the device. • The installation must conform with the local codes. • Source with output rated 230V AC. • Read the security and user instructions before installation! • Use devices and additional components recommended only by the manufacturer! • A wet wipe is sufficient to clean the device. Do not use any liquid or spray cleaner! • If you notice the followings, testing of the device is recommended in the service: – Damaged connectors, cables – Notice liquid or foreign object in the device – The device has fallen down, got major impact or the case has damaged – The device is not working perfectly – The performance of the device is decreased significantly • Do not use the device close to water! • Do not use the device in corrosive humid, acidic or alkaline environments! • Do not disassemble and modify the device! The internal components are under high voltage and can cause electric shock. • Make sure the device is installed at a well-ventilated place! Do not install it in insulating material or constantly hot place! (rockwool insulation) • Our devices have been manufactured of excellent quality, recyclable materials. After service life, please do not dispose the devices to 3/17
Installation Guide household waste! Put them into the designated electronic waste containers! • Before unpacking, please make sure the package is intact. If the package has damaged during the shipment, notify the shipping company!
4/17
Installation Guide
Package contents Item Logipix Network Video Recorder
Model / Variant / Note LNVR-16-8-E
Rack-mount design
CD and DVD
Logipix Documentation Installation Guide (this document) Video Tutorials Software
Printed materials
Logipix International Warranty Document
Cable for Power connection
IEC 60320 C13 Power Cable
Screws
HDD screws, M6 cage nuts and screws for rack cabinet
Necessary Tools, Cables and Devices Task
Tool / Cable / Device
Mounting
Phillips screwdriver / rack cabinet
Cable for LAN connection
CAT6 + RJ45
External Battery connection
Two external 24V Battery cells
Install storage devices
Phillips screwdriver / 3.5” SATA HDDs
5/17
Installation Guide
Hardware overview Front view
6/17
Installation Guide Port / Button
Function
1
100 MBps Ports 1-16
LPoE ports for direct Hybrid Extender connection
2
GIGABIT Port G17
Camera VLAN – Gigabit port for the Logipix cameras (Local Network Switch must be connected here)
3
GIGABIT Port G18
Camera VLAN – Gigabit port for the Logipix cameras (Local Network Switch must be connected here)
4
GIGABIT Port G19
VMS VLAN – Gigabit port for company network connection
5
GIGABIT Port G20
VMS VLAN – Gigabit port for company network connection
6
Optical Port 1
Camera VLAN – Optical port for the Logipix multi-megapixel fix cameras (connected to the Local Network Switch)
7
Optical Port 2
Camera VLAN – Optical port for the Logipix multi-megapixel fix cameras (connected to the Local Network Switch)
8
Power
Power on and Power off
9
Reset
Reset the LNVR (about 3 min)
10
USB1 / USB2
-
11
Arrows
-
12
LCD Display
13
HDD racks 1-8
LOGIPIX Hot swap mobile racks for 3,5” SATA HDDs
7/17
Installation Guide
Rear view
Connector
Function
IEC 60320 C14 Power connector
Connector of the main power
Battery connector block
Accepts two 24 V Battery cells
Cooling Cooling of the LNVR is provided by a built-in ventilation system, which circulates the air inside the enclosure transferring the heat from the electronic components. The ventilation system consists of 4 pieces of 80×80×25 mm and 4 pieces of 40×40×15 mm fans.
8/17
Installation Guide
Weight and Dimension
Specifications Mechanical Dimension (WxDxH)
484×330×266 mm 6U 19” rack-mount
Weight
20 kg, 44.1 lbs (without HDDs)
Material
1.2 mm galvanized iron
Finish
Powder coat, black
9/17
Installation Guide
Electrical Power source
230 V AC
Power consumption
Max. 400 W *
Power connector
IEC 60320 C14
* The power consumption depends on several factors. E.g.: number of HDDs, number of cameras, external batteries, the length of the cables Technical CPU board
Linux operating system 3.6 GHz CPU Diskless operation
Storage
SATA HDDs up to 8 pieces VRMTM Fail-safe file system Built-in RAID function
Network Camera connection
16 port LPoE / 100 Mbit 1 port 1 Gbit and optical for further Logipix cameras
Remote monitoring
1 port 1 Gbit and optical
Security
1500-bit Public Key (RSA) encryption
Protocol
UDP or TCP
Environmental Humidity
20 – 80% Relative humidity (non-condensing) 10/17
Installation Guide Operating temperature
+10 °C to +50 °C (+50 °F to +122 °F)
Certifications ROHS CE Electromagnetic Emissions EN 55022:2010, EN 61000-32:2006+A1:2009+A2:2009, EN 61000-3-3:2013 Electromagnetic Immunity EN 55024:2010, EN 61000-4-2:2009, EN 61000-43:2006+A1:2008+A2:2010, EN 61000-4-4:2012, EN 61000-4-5:2006, EN 61000-4-6:2009, EN 61000-4-8:2010
11/17
Installation Guide
Installation Installation steps 1. Install the HDDs 2. Mounting the LNVR into the rack cabinet 3. Connecting external batteries 4. Connecting to the network 5. Connecting Logipix cameras 6. Connecting the power and power on 7. Checking LED information
Install the HDDs 1. The hot swap HDD mobile racks can be found at the front panel of the LNVR. Smoothly pull the spring lock of a mobile rack to loosen it, then pull it out! 2. Carefully place the HDD into the mobile rack and be sure that the printed label on the HDD is side up! 3. Fix the HDD in the mobile rack by tightening the HDD screws through the mounting holes! Use at least four screws. The mounting holes can be found on the side and on the bottom of the mobile rack. 4. Once the HDD is in the mobile rack put it back to its place and gently push the spring lock to fix it in the LNVR! 5. Repeat the previous steps with all the HDDs! NOTE: There are four HDD racks in each row at the front panel. Each row forms a RAID group. Place the HDDs into the LNVR according to the groups. For example if you are using only 16 HDDs in a LNVR-16-20 fill the first four rows! Only those rows get power which have at least one configured HDD. About HDD configuration see the Help of the Control Center! 12/17
Installation Guide
Mounting the LNVR into the rack cabinet The 6U high LNVR can be mounted in a 19” rack cabinet. 1. Place the 6 pieces of M6 cage nuts (3 on each side) on the front columns of the rack cabinet according to the mounting holes of the LNVR, which you can see at the edges of the front panel! 2. Take the 6 pieces of screws for the rack cabinet! 3. Suit the LNVR to the cage nuts and fix it by tightening all the six screws!
Connecting external batteries Two external 24V battery cells (ACCU1 and ACCU2) can be connected to the LNVR according to the draw below. In case of blackout the LNVR is able to further operate. To calculate the operation time after the power failure has occurred take into consideration the power consumption of the LNVR and the electrical charge of the battery cells!
13/17
Installation Guide
Connecting to the network Connect the LNVR to the Company Network Switches (VMS VLAN) by two CAT6 cables. Connect the cable's RJ45 plugs to the LNVR's Company Gigabit ports! The exact ports are indicated on the picture below (G19 and G20).
14/17
Installation Guide
Connecting the Logipix cameras to the LNVRs Connect the CAT5 Ethernet cable of the Logipix camera to one of the 16 LPoE ports of the LNVR! The draws below show the exact place of the ports. When the network topology do not allow direct connection between the camera and the LNVR, the Logipix cameras must be connected to Local Network Switches by CAT5 cables. Connect the CAT6 cables of the Local Network Switches to the Gigabit LAN connectors (G17 and G18 ports) of the Rack mount LNVR! The exact places of the ports are indicated on the picture below.
15/17
Installation Guide
Connecting the power and power on Connect the power cable to the Logipix Network Video Recorder! The power connector can be found at the back of the LNVR. Connect the power cable to the main power (230V AC)! After connecting the power cable the LNVR is turned on immediately and it will be ready to record after configuration. After the first startup the LNVR can be switched on and off by the Power button.
Checking LED information System LED states during startup: LED
States
Description
System
Lights up in red
LNVR is starting up (it lasts about 11.5 sec)
Lights up in yellow
Initialization
Stays yellow for a long There is no time communication with the motherboard (no watchdog) Lights up in green
16/17
LNVR is ready, recording
Installation Guide LED states during operation LED
States
Description
Pwr
Lights up in green
The camera gets power through the 100 Mbit LPoE port
Link
Lights up in green
Connection has realized through the 100 Mbit LPoE port
GIGABIT Link
Lights up in green
Connection has realized through the Gbit port
Optical Link
Lights up in green
Connection has realized through the optical port
System
Lights up in red
Switching off process has started, or standby operating mode
Blinking in RED
Motherboard failure
power
Blinking in yellow
LPoE or failure
power
Lights up in green
Operation from external battery
Blinking in green
ACCU is charging
Lights up in yellow
ACCU voltage under 22V
Lights up in red
ACCU Low
Battery
17/17
HDD