Transcript
INSTALLATION GUIDE
®
Clear Ice Machine Refresh Kit
VISIT U-LINE.COM FOR THE MOST UP-TO-DATE INSTRUCTIONS AND LITERATURE
The American Built-In Undercounter Leader Since 1962
U-LINE.COM
Table of Contents 1 - Safety Precautions Safety Alert Definitions.........................................................................................................................................1 2 - Inspect & Plan Clear Ice Machine Refresh Kit ............................................................................................................................2 3 - Install Installation Procedure ...........................................................................................................................................2 4 - Initiate Cleaning Cycle Finalizing ...................................................................................................................................................................3
1 Safety Precautions
Safety Alert Definitions Throughout this guide are safety items labeled with a Danger, Warning or Caution based on the risk type:
! DANGER Danger means that failure to follow this safety statement will result in severe personal injury or death.
! WARNING Warning means that failure to follow this safety statement could result in serious personal injury or death.
! CAUTION Caution means that failure to follow this safety statement may result in minor or moderate personal injury, property or equipment damage.
u-line.com
1
2 Inspect & Plan
3 Install
Clear Ice Machine Refresh Kit
Installation Procedure 1. Disconnect / unplug unit from wall outlet.
1
2
3 4 5
6
2. Remove curved cover from upper part of bin.
Mounting Screws
3. Remove circulation pump cover.
Circulation Pump Harness
4. Unplug circulation pump wiring harness. 5. Remove circulation hose mounting clamp and pump mounting screws.
Hose Mounting Clamp
6. Remove water trough screws, and pull trough from unit.
10 7
8
7. Install new water trough (10) using the screws removed in step 6.
9
Your Clear Ice Machine Refresh Kit contains parts to completely refresh the interior components of your ice machine and regain its like-new appearance. U-line recommends having your local U-Line authorized service company install these components. To find a service center near you, please visit http://www.u-lineservice.com or call 1(800) 779-2547. Upon completion of the installation, a cleaning cycle must be completed. Included in Kit:
8. Attach drain tube (8) to water trough using a nylon hose clamp (1).
Stand Pipe
9. Insert stand pipe (7) into water trough. 10. Replace tubing (3) on circulation pump. 11. Install circulation pump in unit using mounting screws removed in step 5.
Nylon Hose Clamp
Drain Tube
ID
Description
1
Nylon Hose Clamp
2
Well Nut
3
Pre-formed Tube
4
Screw 8-32 x 3/4"
5
Pump Cover
6
Ice Scoop
7
Stand Pipe
8
Drain Tube (Clear)
15. Disconnect the unit from power.
9
Nylon Clamp
16. Remove the stand pipe and allow the water trough to drain.
10
Water Trough
17. Reinstall the stand pipe.
–
Cleaner (Not Pictured)
2
12. Secure the pre-formed tube (3) to the unit using the nylon cable clamp (9), screw (4) and well nut (2). 13. Power unit on and observe the first 5 minutes of operation. Adjust tubing as necessary.
14. Install pump cover (5) using screws removed in step 3.
18. Proceed to Initiate Cleaning Cycle.
u-line.com
4 Initiate Cleaning Cycle To initiate a cleaning cycle, follow the steps below. 1. Clean interior liner surfaces. • Dilute 1 packet of cleaner into 2 quarts of water. • Use a soft sponge to thoroughly wipe down interior of cabinet. 2. Power unit on. 3. Initiate cleaning cycle. Once the cleaning cycle starts, the cycle cannot be stopped until complete. a. 2000 Series: While holding the power icon, quickly press the light icon 3 times. b. 3000 Series: Up Select
RETURN TO MENU CLEAN CYCLE CLEAN?
Down
To initiate the clean cycle, enter the Clean Cycle in the Customer Menu. 1. Use Down
to select “Clean Cycle”.
2. Press Select
. The clean cycle will now begin.
4. When water begins to flow over the evaporator (approximately 3 minutes), pour 1 packet of cleaner into the water trough. The cleaning process will last approximately 45 minutes. 5. Following the cleaning process, sanitize the ice bin with dilute bleach solution (1 tablespoon bleach per gallon of water). 6. Rinse interior with warm water. 7. Ice production will resume upon completion of the cleaning cycle.
Finalizing 1. Reinstall the curved cover. 2. Replace the ice scoop with the new ice scoop (6) supplied in your kit.
u-line.com
3
INSTALLATION GUIDE
®
PRODUCT INFORMATION Complete Installation Guides, Use and Care Guides, Specifications & Features and Benefits, CAD Drawings, Overlay Panel/Frame and Toe-Kick Specifications and Instructions, Compliance Documentation and Applicable Energy Guides are available for reference and download at u-line.com.
SERVICE INFORMATION Please consult your Use and Care Guide for troubleshooting information. Answers to Customer Frequently Asked Questions are available at u-line.com under Customer Service. You may contact U-Line directly:
GENERAL INQUIRIES:
SERVICE ASSISTANCE:
U-Line Corporation P.O. Box 245040 Milwaukee, Wisconsin 53224-9540 U.S.A. Phone 1-414-354-0300 FAX 1-414-354-7905 Email:
[email protected] u-line.com
Phone 1-800-779-2547 FAX 1-414-354-5696 Email:
[email protected] u-lineservice.com
PARTS ASSISTANCE: E-mail:
[email protected]
BUILDING ON THREE GENERATIONS OF INNOVATION For over five decades and through three generations, U-Line continues to be the leader in innovation, quality and performance in the premium built-in undercounter ice making, refrigeration and wine preservation market. U-Line has captivated those with an appreciation for the finer things with exceptional functionality, style, inspired innovation and attention to even the smallest details. We are known and respected for our unwavering dedication to product design, quality and selection. In 1962, Henry Uihlein founded U-Line Corporation as an outgrowth of Ben-Hur Freezer Company and was the first to develop and patent an automatic stand-alone undercounter residential ice maker. His foresight and determination to develop new ideas and to succeed when there were no clear guidelines or solutions are evident today. The newest Uihlein generation continues to build upon the family’s innovative legacy at the Milwaukee, Wisconsin based business by providing continuity and vision from which new designs and technology continue to be born. Today the complete U-Line product collection includes Ice Makers, Ice Machines, Wine Captain® Models, Combo® Models, Refrigerator / Freezers, Refrigerators, Drawer Models and Beverage Centers. The U-Line brand offers products in the 1000 Series, 2000 Series and the Modular 3000 Series. The 1000 Series offers a more targeted priced product with appropriate features, while the 2000 Series offers upscale features, advanced technology and specialized product families. Our Modular 3000 Series provides sleek design and versatile temperature settings with our U-Select® control. U-Line’s approach to its breadth of products, multiple price points and features allows a choice and product that will fit any lifestyle.
DESIGNED, ENGINEERED AND ASSEMBLED IN WISCONSIN, USA
The American Built-In Undercounter Leader Since 1962
U-LINE.COM
©2013 U-Line Corporation Publication Number 30318 6/2013 Rev.B
