Transcript
Contents Contents GENERA L INFORMATIO N
P1
Main Feature For your Safety Unpa cking General Operation RCU Front Panel Rear Panel
P1 P2 P3 P3 P4 P5 P5
INSTALL ATION
P6
Connecting to Anten na & TV Connecting to TV using RCA suppor t Connecting to TV using RF support Connecting to TV using S -VIDE O
P6 P6 P7 P7
MENU IN FORMATION
P8
USER IN STALL ATON
P9 P10 P10 P10 P14 P14 P15 P16
Antenna setup - 1) D iSEqC 1.2 Antenna setup - 2) Fixed Chan nel sea rch -1) DiSEqC 1.2 Chan nel sea rch - 2 ) Fixed Syste m Setting Paren tal Lock Facto ry Defa ult
GENERA L VIEWING FUN CTION
P17
Selec t Chan nel Pause the Frame Previous Ch annel Recall TV&Radio mode Chan nel Information Volum e&Audio Control Favorite List
P17 P17 P17 P17 P18 P18 P19
CHANNE L MANAGER
P20
Chan nel Man ager Favorite Cha nnel Move Chann el Lock Channel Rena me Channel Delete Channel Sort Channe l
P20 P20 P21 P22 P22 P23 P23
EPG (Ele ctronic Progra m Guide)
P24
TIMER
P25
ANTENNA DIRECTION HE LP
P26
FRONT PANEL DISPL AY
P27
TROUBL E SHOOTING
P28
Co ntents
GENERAL INFORMATION INFORMATION GENERAL A Digital Satelli te Rec eiver i s a co nvenie nt pro duct th at allo ws you to vie w a va riety o f pro grams provi ded th rough satell ite. Th is use r's gui de cov ers th e installatio n of th e DS R and the n ecess ary steps to impl ement vario us fea tures. This also e xplain s spe cial fe atures avail able o nly in this DS R in d etail, which will al low yo u to m ake fu ll of t hese f eature . Informati on co nfirme d in t his do cume nt is subjec t to c hange . We reserv es th e right,with out no tice,to make chan ge in p roduc t desi gn or p erformance s as p rogres s in e ngine ering manufactory or tec hnolog y may warra nt. M a i n F e a t u re
High quality Vide o & Au dio & Digital Audio Full y MPE G-2, D VB co mplian t Prov ide fri endly a nd ea sy-to- use m enu sy stem Vari ous ch annel editing funct ion (Favorite , moving, loc king, renam ing, de leting and sort ing) Use r programma ble va rious S atellite & Transpo nder in forma tion Auto matic ally se arch fo r newly add ed tran spond er Stor es up to 400 0 chan nels Eas y and s peedy softw are up grade throug h RS- 232 po rt Plug -and-play da ta transfer s ystem (DSR to DSR) Timer func tion, a utoma tically turns On/Off by se tting fu nction (daily, mon thly, ye arly) Auto matic reserv ed cha nnel moving syste m Prov ide El ectron ic Prog ram G uide ( EPG) Tele text fu nction suppo rt Prov ide va rious switch types , LNB t ypes a nd NT SC/PA L mon itor ty pe SCPC/MC PC Re ceivab le from C/Ku Band Satel lite DiSEqC 1. 2 posi tioner for mu ltiple s atellit es, mu lti LNB contr olled b y DiS EqC 1.2 256 colors On-Screen- Displa y PAL /NTSC autom atica lly con versio n Las t chann el aut omatic ally sa ving
Main Feature
1
GENERAL INFORMATION INFORMATION GENERAL For Your Safety
To avoid electric-shock hazards, do not open the cabinet, refer servicing to qualified personnel only.
Keep the receiver away from flower vases, tubs, sinks, etc., in order to avoid damaging the equipment.
Do not expose the receiver un-der the sunlight. And keep it away from the heat source.
Do not block ventilation holes of the Receiver so that air can circulate freely.
When the abnormal phenomenon occur, you should cut off the power immediately.
Do not touch the receiver during thunder, since that might create electric-shock hazards.
Switch the receiver off whenever it remains out of service for an extended period.
Be sure to turn the Receiver off and disconnect the AC power cord before cleaning the Receiver surface. If the surface is dirty, wipe clean with a cloth which has been dipped in a weak soap-andwater solution and wrung out thoroughly, and then wipe again with a dry cloth.
For Your S afety
2
GENERAL INFORMATION INFORMATION GENERAL Unpacking
Remote Control
Ba tterie s
Use r's Guide A udio / Video Ca ble
General Operation Througho ut this manu al you will n otice t hat the ever yday o perati on of t he rec eiver is bas ed on a ser ies of user f riendly on screen displa y and menus . Thes e men us will hel p you get th e mos t from your receiv er, gui ding y ou through i nstalla tion, c hanne l org anizin g, viewing an d ma ny othe r func tions. All functio n can be carried o ut usin g the button s on th e RCU , and s ome o f the f unctio n can also be carried ou t usin g the b uttons on the front panel. The rece iver is easy to us e, alw ays a t you r command and a daptable for futur e adv ances . Ple ase be awar e that new so ftware may chang e the functionality o f the r eceive r. Sh ould y ou experien ce and diffic ulties with t he ope ration of yo ur rec eiver, pleas e con sult t he rel evant sectio n of this m anual, inclu ding t he Problem Shoo ting, o r alte rnativ ely ca ll your deale r or a c ustom er ser vice ad viser.
Unpacking
General Operation
3
GENERAL INFORMATION INFORMATION GENERAL RC U Key
Function Turns power ON/OFF of the DSR When watchi ng a channel, mute the soun d
0~ 9 TV/RADIO PR FAV SAT AUDIO
Enter numbe r of the require d menu item or select a chan nel num ber to watch Switches between TV and R adio mode Switches back to previous channe l Display the favorite channel list Select progra ms by satellite Multiple lang uage
INFO
Shows information o f the current channel
MENU
Press this ke y one time to run menu onscreen, and ca ll command box Moves up / down a p age in the cha nnel lis t
OK, LIST PR+, PR-
EXIT EP G L R
TV/AV
Execu tes the selecte d item in the menu screen or ente rs the desired value in any input m ode When watchi ng a channel, change chann els or move to the next higher or lower item in the men u When watchi ng a channel, adjust the volume or move to the le ft or right item in the menu Returns to th e previous menu on the men u screen or esc ape fro m the menu Calls up the EPG (Electronic Program Guide) Selects the different audio modes Switches between TV and AV modes (No function in this model) Switches to teletext or subtitle mo de
UHF PAUSE
RCU
Switches to UHF turning m ode
(No fu nction in thi s model) Press once to pause the sc reen pi cture, p ress once a gain to go to the norm al mode
PAL/NTSC
Switches between PAL and NTSC modes
POSITION
Motor setup
4
GENERAL INFORMATION INFORMATION GENERAL Front Panel
Key
Function Tur ns on and off the pow er of the rece iver.
(PR+)
In live mod e, changing to the next channel.
(PR-)
In live mod e, changing to the previous channel.
(VOL+)
In live mod e, a ch annel, increase the volume .
(VOL-)
In live mod e, a ch annel, decrease the volume.
Rear Panel LN B IN: CONNE CT TO SATELLITE A NTENNA LN B OUT:CONNECT TO THE OTHE R RECEIVER CONNECT TO A PC FOR S /W UP GRADE
CONNEC T TO A TV OR VCR CONNECT TO TV ANT IN PUT
POWER ON/OFF
CONNECT TO TV USING S-VIDEO CONNECT TO A DIGITAL AMPLIFIER CONNE CT TO 12V TO AN EXTERNAL 0/12V SW ITCH CON NECT VIDEO TO TV USIN G RCA JACK CONNECT TO AUDIO R/L TO TV OR AUDIO TUNER
Front Pane l
Rear Panel
5
ATION INSTALL ATION Con necting to ANTE NNA & TV
DSR
Antenna
Con necting to TV using RCA support
Satellite Dish
IN
VIDEO
AUDIO
TV R
L
DSR
Connecting
6
ATION INSTALL ATION Con necting to TV using RF support Cable or OFF-Air Antenna
Satellite Dish
VC R
IN F ROM ANT
OUT TO AN T
D SR
IN
TV
Connecting to TV using S-video Satellite Dish
D SR
VIDEO
TV
Connecting
S-video
AUDIO
R
L
7
MENU INFORMATION On ce you properly in stalled and c onnec ted ca bles o f the receive r, the menu will b e dis played .
This men u cons ists of 5 maj or mai n menu s as f ollow. - C hanne l Man ager - P rogra m Gui de - T imer - U ser In stalla tion - R eceiv er Info rmati on
Du ring th e inst allatio n the OK ke y conf irms a selec tion a nd LIS T key show s Dow n Lis t Box if the c olumn has
mark. Yo u can also u se the nume ric key s on the RCU
to e nter n umeri c value . Us e the P R+, PR- key to mo ve upwards and do wnwa rds fro m one line t o anot her lin e and use
key to move from main menu to sub menu and m ove fro m left side t o
right side or ver sa. Me antime , you want t o esca pe the menu syste m, ple ase pr ess EX IT key on th e RCU.
MEN U INFORMATION
8
USER INSTALL ATION This men u cons ists of 5 maj or sub -menu s as bel ow. -A ntenn a Setu p -C hanne l Search -S ystem Settin g -P arenta l Lock -Fa ctory Defau lt
Antenna Setup-1) D iSEqC 1.2 1)A ntenn a : You ca n sele ct ma ximum 16 ant ennas with the combin ation switc hes. 2) Type : Sele ct you r ant enna t ype to be DiS EqC1 .2. 3) Satell ite : S elect f irst sa tellite you w ant. 4) LNB Type : Selec t your LNB t ype. If you hav e univ ersal LNB, s elect Univ. 5) LNB Freq . : En ter t he pr oper LNB fre quenc y ref e rring to y our L NB u sing num eric key on the RCU o r use KEY PAD dis played by pr essing OK ke y. If y ou hav e a du al LNB , ente r the p roper value in the b oth of value box. 6) Switches (0 /12 Vo lt, 22 KHz Tone, DiSEq C) : You can selec t the switch es wit h wh ich you want to con figure the an tenna . 7) C /Ku b and c ontrol : You can se lect C /Ku ba nd con trol by selec tion of switc h type. Ea st, We st Lim it : If you s elect Limit Setu p but ton, L imit Se tup menu wi ll pop up. Press E key on the R C U c o ntin u ous l y r e a c he s to t he eas ternmost po int and then press OK ke y on the RCU. The messa ge of Would you li ke to set East limit of DiS EqC motor ? wil l be dis played for your confirmation . Pl ease cursor on the OK button on the s creen and pre ss OK key o n the R CU to confir m the East lim it. To set We st limit, take the sa me st eps as East l imit.
Antenna Setup-1) DiSEqC 1.2
9
USER INSTALL ATION Antenna Setup-1) D iSEqC 1.2 Re set Di SEqC limit : If y ou wa nt to reset the East limit or West lim it, place a cu rsor o n Res et DiS EqC Limit but ton an d then pres s OK key on the RCU. The mes sage o f Wo uld y ou lik e to r eset lim it for DiSE qC positioner? will be dis played for y our co nfirmation. Select OK but ton by press ing OK key o n the RCU. The cursor will move to the East l imit bu tton so that y ou ca n rese t the limit. After that, ple ase re set We st limit same as be fore. Aft er set ting a ll nec essari es, pl ease EXIT to fini sh antenna setup menu . Th e me ssage of A re you sure to cha nge th e con figura tion o f Ante nna se tup? will b e dis played . Plea se se lect OK butto n on the screen an d then wait for savi ng a d ata.
Antenna Setup-2) Fixed 1)A ntenn a : You ca n sele ct ma ximum 16 ant enna w ith th e comb inatio n swit ches. 2) Type : Sele ct you r ant enna t ype to be Fix ed. 3) S atelli te : Se lect sa tellite you w ant. 4) LNB Type : Selec t your LNB t ype. If you hav e univ ersal LNB, s elect Univ . 5) LNB Freq . : En ter t he pr oper LNB fre quenc y ref e rring to y our L NB u sing num eric k ey on the RCU. If y ou ha ve a dual L NB, enter the pr oper val ue in t he bot h of va lue bo x. 6) Swit c hes (0/12 Volt , 22K Hz To ne, DiS EqC) : You can s elect t he switches with wh ich you want to con figure the an tenna . 7) C/Ku b and c ontro l : You can s elect C /Ku ban d con trol by selection of switch type . Aft er set ting a ll nec essari es, pl ease EXIT to fini sh antenna setup menu .
Th e
me ssage of A re you sure to cha nge th e con figura tion o f Ante nna se tup? will b e dis played . Plea se se lect OK butto n on the screen an d then wait for savi ng a d ata.
Antenna Setup-1) DiSEqC 1.2
Antenna Setup-2) Fixed
10
USER INSTALL ATION Cha nnel Search-1)DiSEqC 1.2 1) A ntenna : Se lect your antenna numbe r. 2) Satellite : Select d esired a satellite u sing ke ys or i f you p ress O K key the li st of sat ellite will be disp layed so tha t you can sel ect ea sily. You can see the in forma tion o f sele cted sat ellite i n the r ight sid e. Ed it Mo de : If you wan t to edit th ose pre progra mmed data such as Tra nspon der, Fre quenc y, Sy mbol Rate, Polari zation and 22 KHz, please press Edit mode key (Red col or key ) on the RC U. An d the n you can mo ve into tho se co lumns to c hange the val ue. 3) Posit ion : After selec ting a sate llite, ple ase se lect Position butto n and then keep pre ssing E or W k ey on the RCU until sel ected satelli te is lo cked. If the satellite is loc ked co rrectl y, the c olor o f signa l labe l bar wil l be ch anged to yel low. Wh en yo u pres s OK key on the RCU , the me ssage of Would y ou like to se t the v alue of curren t posi tioner? will be dis played for you r conf irmation. 4 ) Tr a n s p o n d e r : S e l e c t d e s i r e d a tra nspon der us ing k e y s o r i f y ou pre ss OK key the Down List B ox will be dis played so that you can se lect e asily. 5) F requency & Symbol Ra te : Ed it Freq uency and S ymbo l Rate you want. 6) P olari zation : Sele ct Hor or Ver. 7) 2 2KHz : Sele ct ON or OFF.
Channel Search-1)DiSEqC 1.2
11
USER INSTALL ATION Cha nnel Search-1)DiSEqC 1.2 8) Searc h 1 S at : Allows you to se arch cha nnels with c onven ient op tions as foll ows, sel ect on e using arrow keys . - Se arch 1 SAT : Se arch c hannels for one sat ellite which s electe d on S atellit e colu mn. - Se arch TP : Searc h channels in one TP wh ich sel ected on TP colum n. - Se arch Netwo rk : S earch chann els fo r the net work r elated the TP. - Se arch all SAT : S earch all c hanne ls at onc e whic h you searc hed al l satel lite. Notes: In " Search 1 SAT " and " Search TP" functio n,you can switch "FTA+ "for free to air and scramb c hannels model,"FTA"for f ree to air cha nnels model, " " for scramb channels model by RCU. The rece iver will au tomati cally s earch the cha nnel for TV and Radio and during this pro cedur e you can se e the alread y searched cha nnels in th e Sea rched List B ox on the screen. If c omple ted se arching cha nnel, curso r will be place d on COMPLET E aut omatic ally, the n pres s OK b utton. 9) Set PI D : If you w ant to set P ID (Pa cket I de n tif ie r) ma n ua l l y, s e l ec t T P i n t he Ch annel Searc h Pag e and press MENU key on the RC U to d isplay command bo x. An d selec t SET PID command and press OK, the n set PID menu will be displa yed. E nter the corre ct valu e and select OK. 10) Sat n ame edit : If you want to change sat ellite n ame, select the sa tellite and p ress Sa t Name Edit key (Yellow color k ey) on the RCU to d isplay command box. Select Sat nam e ed it the n Ke ypad Dialog box will app ear. Using arrow key o n the RCU, you can edit t he sat ellite n ame.
Channel Search-1)DiSEqC 1.2
12
USER INSTALL ATION Cha nnel Search-1)DiSEqC 1.2 11) Dele te TP : If you want t o dele te a tra nspon der, pl ease s elect the Tr anspo nder wh at you wan t to d elete and t hen p ress ME NU ke y on t he RC U to d isplay command box . The n sel ect De lete T P command and the confirm mes sage box wi ll be d isplaye d.
12) Re-S ync : W hen all loca tion o f searched sat ellites are s hifted by u nknow n rea son, you can r ealign all of them o nce if you a djust one satel lite loc ation.
13) Go to 0 fo r DiSE qC 1. 2 : Wh en yo u insta ll the motor of DiS EqC 1 .2 ant enna a t firs t, you can se lect th is func tion to move the ce nter o f ante nna to be 0 .
14) Search Option : T he receiver allows you to search chan nels w ith co nvenie nt op tions as below. -FTA Onl y -No t searched TP on ly -So rt by Scram ble If y ou se lect So rt by Scramble, th e rece iver sort the s cramb led ch annels automatica lly. If you s elect Not s earche d TP only, the rec eiver search chan nels in the T P whic h is not searc hed or new T P.
Channel Search-1)DiSEqC 1.2
13
USER INSTALL ATION Cha nnel Search-2) Fixed 1) A ntenna : Se lect your antenna numbe r. 2) Satellite : Se lect d esired a sate llite u sing key s or if you pr ess OK key, the li st of sat ellite will be disp layed so tha t you can sel ect ea sily. You can see the in forma tion o f sele cted sat ellite i n the r ight sid e. 3) Edit Mode : If y ou wa nt to edit those pre progra mmed data such as Tra nspon der, Fre quenc y, Sy mbol Rate, Polari zation and 22 KHz, please press EDIT mode key (Red col or ke y) on the RCU to d i splay the command box. And then y ou ca n mov e to tho se col umns to cha nge th e value . 4) ~ 14) Pleas e refe r to DiSEqC 1.2 type ant enna.
System Setting Sy stem Settin g men u allo ws yo u to c hange the p rincip al opti on and to se t othe r item s pro per to your e nviron ment by pre ssing O K key on the RCU. 1) OSD Language : Sele ct yo ur desired lan guage . 2) A udio Langu age : Select your d esired aud io lan guage to be in the top pri ority u nder the condi tion th at this langu age is suppo rted fro m the c hanne l. 3) S et loc al tim e : Adjust yo ur loca l time . 4) S umm er tim e : If yo u are in summer ti me, sel ect ON . 5) LNB p ower : If you r rece iver is conne cted to LNB, selec t YES . But if your r eceive r is c onne cted to othe r rece iver th rough Loop Thro ugh su pport , you should chec k wh ich rec eiver is con nected direc tly to LNB. I n case if tha t othe r recei ver is directly con necte d to LN B, se lect OFF .
Channel Search-2) Fixed
System Se tting
14
USER INSTALL ATION System Setting 6) Screen Form at : If your T V sup ports 16:9 s c r e e n f o r ma t a n d se l e c t e d c h a n n el pro vides 16:9 fo rmat progra m, sel ect 16 :9 . 7) Video output : If your SCART supp orts RGB con trol, s elect R GB. Otherw ise s elect CV BS. 8) TV ty pe : S elect the ty pe ac cordin g to you r TV ty pe. 9) Display Inf o Bar : You can adjust the dis playin g time interv al of in fo bar from 2 sec to 1 2 sec . Defau lt valu e is 6 sec. 10) Start On Channe l : If y ou pre ss OK key, the n the chann el list is dis played . You can sel ect on e cha nnel o f the list, th e sele cted cha nnel starts when ever you tu rn on the rec eiver. 11) UHF S tandard : S elect UHF ty pe. 12) UHF Chann el : Se lect yo ur de sired U HF ch annel for sat ellite mode. No te : Th e rece iver fo r the c ountry, in wh ich it i s not used UHF, 11 ) and 12) op tion will be delete d.
Parental Lock This func tion a llows y ou to lock th e cha nnel wit h your passw ord in orde r to pr event from acc essin g the chann el by your c hildre n or any other perso n. An d also you ca n pro tect yo ur ins talled data and information using Instal l Lock. Ho w to ch ange Password : 1) E nter t he cur rent pa sswo rd. 2) S elect ON of Paren tal Loc k. 3) E nter n ew pa sswor d. 4) C onfirm your new p asswo rd ent ering n ew pa sswor d agai n. No te : De fault p asswo rd is 0 000. Wa rning : Onc e you change pass word, please do no t forge t and k eep well.
System Setting
P arenta l Lock
15
USER INSTALL ATION Parental Lock Ho w to us e Parent Loc k : 1) If you activa te parent loc k func tion, g o to the TV ch annel Manag er Pa ge. 2) Press Lock key (Blue c olor k ey) on the RCU. 3) S elect chann el the which you wa nt to Lock. 4) P ress OK the n symbo l is ma rked.
Ho w to us e Inst all Loc k : 1) E nter t he cur rent pa sswo rd. 2) S elect ON of Install Lock. 3) E nter n ew pa sswor d. 4) C onfirm your new p asswo rd ent ering n ew pas sword again . 5) E xit this men u. 6) S elect any m enu an d pres s OK on the RCU. 7) T hen Enter P asswo rd Box will b e disp layed. 8) U nless enter correc t pass word, you ca n not run an y men u. No te : De fault p asswo rd is 0 000. Wa rning : Do n ot forg et you r pass word in orde r not to fail to opera te the receiv er.
Factory Default If y ou wa nt to b ring the rec eiver b ack to the fac tory d efaul t condition, selec t Fac tory De fault a nd pre ss OK key. Then Wa rning messa ge will be dis played. To con firm s elect OK and press OK. Wa rning :
Yo u will lose all of data and
info rmati on whi ch was insta lled.
Parental Lock
Factory D efault
16
GENERAL VIEWING VIEWING FUNCTION GENERAL Select Channel If y ou wa nt to s elect c hanne l, use CH ke y on the front panel or PR +, PR- key o n the RCU or num eric k ey on the RCU to sele ct a cha nnel and p ress OK ke y on the RCU. In additio n to th e abo ve nor mal fu nction , the rec eiver provid e more con venient cha nnel cha nge fu nction . Wh ile wa tching , pres s OK key on the RCU. Then cha nnel list wi ll be d isplay ed on the right side of th e scre en. If press EXIT key, the chann el list will be disap peare d. To select a chan nel, g o up a nd dow n of th is cha nnel li st and place cursor on a d esired cha nnel. Then, press OK ke y to wa tch th e sele cted ch annel. If y ou pre ss
key on the RCU, chann el list will mo re upg rade d own p age by page .
Pause the frame Pre ss PAUSE k ey on the RCU to paus e the screen . To b ring it back to the norma l mo de, press PAUSE k ey once aga in.
Previous channel recall Pre ss ←P R key on the RCU to mov e the previo us cha nnel which y ou wa tched before .
TV & Radio mode Wh ile vie wing T V cha nnel, press TV/RA DIO key on th e RCU to move ra dio mode. P ress this key o nce a gain, it will b ring y ou bac k to the TV mode.
Sele ct Channel
Pause the fram e
Previous chann el recal l
TV & Radio mode
17
GENERAL VIEWING VIEWING FUNCTION GENERAL Cha nnel Information Every time you chan ge ch annel s, you will rec eive progr am i n fo rma tion f or a few sec ond. Wh ile wa tching chan nel, y ou ca n see the c u r r e n t c h a n n e l i n f o r m a t i o n a n y t i me , pre ssing INFO k ey on the RCU. No te : Ch annel inform ation will be displa ying for 6 se conds and disapp eared . You can adj ust the disp lay time inte rval fr om 2 t o 12 sec onds.
Volu me & Audio Control 1) Volum e Con trol To increa se or d ecrea se vol ume, u se on the RCU or VOL
key
on the fro nt pan el.
No te : T he receiver has 1 8 volu me le vels and this sh all be cont rolled from the adj usted volume level of yo ur TV. 2) M ute To mute the so und, p ress
button on the
RCU. To bring b ack th e norm al sou nd, p ress this key o nce ag ain. 3) A udio Control L Pre ss the R key repeate dly to selec t one of thre e poss ible A udio s etting s (Lef t, Rig ht and Stere o) . The curre nt aud io con dition will be displa yed in the ch annel information. 4) L anguage S electio n Pre ss the AUD IO ke y on the R CU re peated ly to select audio -language. This is dep en-de nt on the tra nsmiss ion of audio signa l which supports Multi-lan guage .
Channel Informati on
Volume & Audio Control
18
GENERAL VIEWING VIEWING FUNCTION GENERAL Favorite List If y ou wa nt to have a fav orite group lists wh ich we re ma de in the channel mana ger, ple ase pr ess FAV key on the RCU. You can acces s nex t favo rite group when you press FAV k ey on e more . The meth od of group ing of favori te cha nnel list will b e exp lain in the F avorit e Cha nnel (pa ge 20).
Favorite Lis t
19
CHANNEL MANAGER The receive r prov ides m ost po werful channel ma naging funct ion in the wo rld and this funct ion allows y ou to have a more inte restin g and usefu l ope ration as we ll as watch ing ch annel s simp ly.
Channel Ma nager Chan nel manage r cons ists o f TV channel, Radio chan nel. Press OK k ey pla cing the curso r on th e TV Channel. Note :Since the usage of Radio Ch annel is same as th at of T V cha nnel, in this manu al only TV Cha nnel manag er is explain ed. In the left s ide of TV ch annel menu, you can see the ch annel list which were alrea dy searc hed a nd in the right side, you can watch the c urrent chann el in small Picture in Grap hic (PIG) mo de (1/9 size of the normal) an d you can s ee channel information unde r the PIG scr een. When you move c ursor f rom one cha nnel to anoth er, PIG will c hange accordingly. You c an util ize tho se color key s on th e RCU as be low : 1. De lete m ode(R ed ke y) 2. Fa vorite mode (Gree n key) 3. Mo ve mo de(Ye llow k ey) 4. Lo ck mo de(Blue key ) Also, press MENU key on t he RC U, then command menu w ill be d isplay ed. TV c hanne l man ager h as 3 commands as below : 1. Re name Favorite group 2. Re name 3. So rt
Favorite Ch annel When you select chann el ma nager, default favor ite list will be showed on the s creen as Favo rite 1. Selec t your favor ite cha nnel a nd then pre ss OK k ey. Th en will b e mar ked a t rear of your selected cha nnel n ame. And i f you want to dele te the chann el name in the favo rite channel list, press OK k ey on ce ag ai n, th en th e mark will b e disap peare d. Ch annel M anager
Favorite Channel
20
CHANNEL MANAGER CHANNEL Favorite Channel Aft er the select ion of favorite chan nels press EXIT k ey twi ce to s ave d ata an d pres s FAV key r epeat edly to see if each o f the f avorit e grou ps are prope rly selected. mean s scra mbled chann el. Ho w to m ake f avorit e grou p : 1)W hen you e nter c hann el manager, the def ault fa vorite group will be sho wed once on the sc reen a s Favo rite 1. 2)I f you p ress f avorite key ( Green color key) on the R CU, new f avorite grou p wil l be cre ated n ewly a s Favo rite 2 and Favorite 3. Ho w to e dit th e nam e of Fa vorite grou p : 1)I n the favorit e mod e, pre ss ME NU ke y on the RCU then the comme nd b ox wil l be dis played on th e scree n. 2)S elect " Ren ame F avorit e gro up " in the commend box. 3)You can edit t he name by using k eypad .
Move Channel In the T V cha nnel manag er pa ge, p ress Mo ve ke y (Yellow c olor ke y) on the RCU. Se lect a chann el by press ing O K key and mo ve the curso r to th e loca tion in which you wa nt to move the selected ch annel and pre ss O K key. The n, yo u wil l find the sel ected chann el is moved to th e des ired loc ation and c hanne l no. also c hange d in ord er acc ording ly. An d chec k whe ther t he ch annel numb er is cha nged on the chann el list.
Favorite Channel
Move Channel
21
CHANNEL MANAGER MANAGER CHANNEL Lock Channel In the T V cha nnel manag er pa ge, p ress Lo ck key (blue color k ey) on the R CU. This Loc k com mand allow you t o lock the cha nnel. First s elect the ch annel, which you wa nt to l ock, a nd pr ess O K key and then wil l be marked at rear o f you r sele cted cha nnel n ame. No te : To perfo rm this func tion, y ou sh ould set up the Paren tal Lo ck in a dvanc e.
Rename Channel In Main Page, p ress M ENU key o n the RCU, and then selec t Ren ame o n the command me nu. This Ren ame c omma nd allo w you to ren ame the chan nel. F irst se lect th e cha nnel t o be ren amed and p ress OK ke y, the n, Keypad dia log b ox wi ll be displa yed. Edit your des ired n ame e nterin g word or nu mber. To del ete ch aracte rs or numbe rs, se lect in the key pad d ialog. An d chec k whether th e chan nel na me is chang ed on channel list p roperl y or no t.
Lock Channel
Re name Chann el
22
CHANNEL MANAGER MANAGER CHANNEL Del ete Channel In the Ch annel mana ger, y ou can ente r Dele te CH mode , if yo u pres s Del ete ke y (Re d colo r key) on the RCU. Then , if you press Dele te key (Red c olor k ey) rep eately, the mode will b e chan ged to be De lete T P -> Delete Satell ite -> Delete All -> Delet e CH . This Dele te co mman d allows you to de lete the chan nel perman ently. First select the cha nnels , whic h you want to de lete, then sel ected chann el number w ill be marke d to X . If you cance l the s electio n, pre ss OK key aga in, the n the marke d number wi ll be ba ck. If y ou decided t o dele te, pre ss EX IT key and the n Mes sage box w ill be displa yed. P ress OK to del ete. An d chec k whether th e chan nel nu mber is dele ted on chann el list or not. Wa rning : The delet ed ch annel can n ot be recov ered u nless you s earch again . Ple ase be caref ul whe n you decide to de lete ch annel .
Sort Channel In Main Page, p ress M ENU key o n the RCU, and sele ct Sor t on th e command menu. This Sort menu has i ts sub comm and a nd it allo ws yo u to so rt the chann els as you lik e. You can s ort the chan nels by Favo rite, L ock , Sc rambl e , SAT name and CH na me. P lace the curso r on your desired line , and then pre ss OK key. An d chec k whether th e chan nels a re sorted pro perly on the chann el list or not. No te : Ra dio Ch annel Mana ger ha s the s ame o perati on as T V cha nnel M anage r.
Delete Channel
Sort Channel
23
EPG(Electronic Program Program Guide) Gu ide) EPG(Electronic The receiv er pro vides EPG functio n for you to g et ac cess to the TV G uide(or Ra dio Guid e if yo u are listen ing to radio channels) w h i c h wi l l s h o w t h e t i t l e s a n d o t h er info rmatio n of th e curre nt and next progra ms on d iffere nt ch annels. The infor mation is only availa ble from the network to which the channel yo u are watching bel ongs.
Th en EP G box will be displa yed. Yo u can see th e cha nnel in the PIG sc reen, ch annel list in the left si de an d Pro gram sc he dul e for se le c ted c ha nn e l wi ll be dis playe d in th e righ t side . The time w ill be dis playe d relat ing to the pro gram sched ule. Se lect o ne cha nnel a nd pla cing th e mark on the t ime of Prog ram n ame w hich detail informat ion yo u wan t to kn ow. Th en you can se e bl u e bu t t on, i f t h ere is de t ai ls informat ion of the ch annel. And p ress Detail (B lue co lor key ) key on the RCU, then detail informat ion bo x will b e disp layed.
If yo u wan to che ck the forme r or la ter info rmation of the cha nnel, p lease press +6:00 key (Yellow color key) o r 6:00 key ( Green color key) on the RCU. Note : A N o data avai lable messa ge wil l be sh own if the selected chan nel do es not prov ide EP G dat e. Receiver in for mation Pres sing this bu tton will sh ow th e hard ware and s oftwar e info rmatio n abo ut the rece iver.
EPG
Receiver infor mation
24
TIMER TIMER The TIMER funct ion all ows yo u to p rogram the t imer w ith various ways. T his fu nction is on e of th e stron g poin t of th e rece iver. To a ctivate the Turn On Tim e and /or Tu rn Off Time , sel ect YE S and ente r your desired time. Note : The receiv er display th e time which is giv en by satellite, so t here m ay be some diffe rences betwe en ac tual time and the re ceive r's time.
Easy Timer To ac tivate the Tu rn on time and/or Turn off the t ime , select YES a nd en ter you r desired time . And you c an als o sele ct cha nnel w hich will be tu rn on or turn off. Note : Eas y timer is def ault fo r the fi rst time.
Advanced Timer Adva nced Timer allows you to pro gram the vario us timer fun ction. You can se t the timer d aily, w eekly, mont hly and yearly.
Easy Timer
Advanc ed Tim er
25
ANTENNA DIRECTION DIRECTION HELP HELP ANTENNA Alt h ough you enter ed co rrect val ue in Ant enna Set u p men u, if your a ntenn a is pos itione d inco rrectly, you c ould n ot rec eive sig nal fro m the S atelli te. So the receiver provid es An tenna Direc tion He l p i n o rd e r fo r you t o h a v e e x a ct info rmatio n to d irect y our a ntenna towa rd a sat ellite. Firs t sele ct you r desired Sat ellite n ame a nd the n the locatio n of se lecte d sate llite will be display ed. In case the loc ation of the satelli te is ch anged, you can re -set t he new loc ation. Sec ond, e nter th e valu e of L ongitu de and Latitu de of y our lo cation .
If y ou ent ered c orrect value of you r position, pla ce you r cursor on Compu te and press OK key. T h en t h e r e ceive r sh ow t h e ex act info rmatio n of a ntenna point ing.
ANTENNA DIRECTION HELP
26
FRONT PANEL PANEL DISPL DISPLAY AY FRONT
UP LOAD PROCEDURE
VCR MODE
DOWN LOAD PROCEDURE
SYSTEM WAIT ING
ER ROR IN DATA TRANSMITTING
FLASH ROM ERROR
TV MODE
SYSTEM BOOTING
TI ME (STAND BY INDICATOR) FRONT PA NEL DISPLAY
27
TROUBLE SHOOTING SHOOTING TROUBLE Problem
Possible causes
What to do
The display on the front panel does not light up.
Main cable is not connected.
Check that the main cable is plugged into the power socket.
No sound or picture, but the front panel shows red light.
The receiver is in standby mode.
Press the standby button.
The satellite dish is not pointing at the satellite.
Adjust the dish. Check the signal level in the Antenna Setup menu.
No signal or weak signal.
Check the cable connections, LNB and other equipment connected between the LNB and the receiver, or adjust the dish.
The satellite dish is not pointing at the s atellite.
Adjust the dish.
Signal is too strong.
Connect a signal attenuator to the LNB input.
Satellite dish is too small.
Change to a larger dish.
LNB noise factor too high.
Change to an LNB with lower noise factor.
The LNB is faulty.
Change the LNB.
The picture is not showed on the screen, when switching on.
The system is connected by RF leads.
Check the UHF channel fixed in your system and tune the UHF channel properl y.
There is interference on your digital satellite channels, an existing terrestrial channel or video signal.
The system is connected by RF leads and the output channel of the receiver interferes with an existing terrestrial channels or Video signal.
Change the receiver output channel to a more suitable channel, or connect the system by SCART leads.
Batt ery exhausted.
Change the batteries.
RCU is incorrectly aimed.
Aim RCU at the receiver, or check that nothing blocks the front panel.
No sound or picture.
Bad picture / blocking error.
The RCU is not working.
No te : If you have t ried a ll of the act ions s ugges ted above, withou t solv ing th e pro blem, please conta ct you r deal er or s ervice provid er.
TROUBLE SHOOTING
28
