Preview only show first 10 pages with watermark. For full document please download

Installation Instruction For Fixture 6358

   EMBED

Share

Transcript

INSTALLATION INSTRUCTION FOR FIXTURE 6358 WARNING! SHUT OFF THE POWER AT FUSE OR CIRCUIT BREAKER. MOUNTING THE FIXTURE 1. Shut off the power supply at the fuse box or circuit Wiring (See fig.2) breaker box. Remove the old fixture from ceiling. 1. Connect the electrical wires as follows. Connect the Including the old cross bar. black wire from the fixture to the black (HOT) house 2. Carefully unpack your new fixture and lay out all the wire. Connect the white wire from the fixture to the parts on a clear area. Take care not to lose any small white (Neutral) house wire. Make sure all the wire parts necessary for installation. nut was secured. You may wrap the connections 3. Thread 2 mounting screws (E) through the mounting with electrical tape. If your outlet box has a ground screw holes from the back of the universal mounting wire (Green or Bare Copper) connect fixture’s plate (A) correctly (The Side Without “GND” mark). ground wire to it. Other wise attach the bare copper 4. Attach the universal mounting plate (A) to the outlet fixture wire to the green ground screw on the box using the Outlet Box Screws (B). The side of the mounting bar. Universal mounting plate marked “GND” must face 2. Tuck the wire connections neatly into the wall out. junction box. 5. Follow the wiring instructions carefully (See Fig.2). 6. Attach the fixture main body onto the outlet box by Fig.2 protruding 2 mounting screws (E) through the mounting screw holes on the fixture back plate (J), then tighten it with the cap nuts (I). 7. Thread the nipple (D) onto the hex nut (F) completely, then secure with hex nut snuggly; 8. Insert the glass shade (G) and steel washer (N) over the nipple (D), and lock it in place with hex nut (O). 9. Insert the cap (P) over the nipple (D), and secure with finial (Q). 10. Install the light bulb in accordance with fixture’s specifications. DO NOT EXCEED THE MAXMUM WATTAGE RATING! Fig.1 (A)UNIVERSAL MOUNTING PLATE (B)OUTLET BOX SCREWS OUTLET BOX SUPPLY WIRE (E) MOUNTING SCREW GROUND WIRE GREEN GROUND SCREW WIRE NUT(C) MINI 90℃ SUPPLY CONDUCTOR CAP NUT(I)