Preview only show first 10 pages with watermark. For full document please download

Installing The Dsx Ip Adapter (ipa)

   EMBED

Share

Transcript

1093058_rev1-02.qxd 4/20/09 12:59 PM Page 1 Installing the DSX IP Adapter (IPA) Use the DSX IP Adapter (IPA) to connect a DSX IP Keyset to the LAN. The IPA is Power Over Ethernet PoE 802.3af compliant and provides the 48V DC voltage required to power the keyset. A separate keyset power adapter is not required. Additionally, the IPA provides a switched 10BASE-T/100BASE-TX Ethernet connection via the telephone from the LAN to the PC. To install the DSX IP Adapter: 1. Plug the DSX IP Adapter power supply cord into the 48V DC jack on the adapter. 2. Plug the DSX IP Adapter power supply into a convenient 115V AC receptacle. 3. Connect a CAT5e cable (4-pair) from the PHONE jack on the IPA to the LAN jack on the telephone. 4. Using another CAT5e cable, connect the LAN jack on the IPA to your LAN. – You can optionally connect a PC to the PC jack on the IPA. The telephone must be connected. – If connected to a PoE 802.3af compliant switch, you can omit the IPA power supply. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règiement sur le matériel brouilleur du Canada. A50-017251-001 (1093058) NEC Unified Solutions, Inc. 4 Forest Parkway, Shelton, CT 06484 www.necdsx.com Empowered by Innovation Printed in Thailand