Transcript
How to Set Time, Weight and Stride Length 1. Press MODE to choose 24hr clock or 12hr clock. Press SET. Display will show HOUR & MIN and the ‘HOUR’ flashing. (The 12hr clock is shown here).
●
INSTRUCTION
GSensor 3D Pocket Pedometer
GS2027
Know Your Pedometer Front Unit
Battery
MODE
(a) Press MODE to advance by 1. (b) For the rapid advance, press MODE and hold over 2 seconds. (c) Press RESET to deduct by 1. (d) For the rapid deduct, press RESET and hold over 2 seconds. Press SET. Display will show HOUR & MIN and the ‘MIN’ flashing.
SET Battery CR2032 RESET
Back Unit
Strap
Battery Cover
How to attach thestrap strap attch the to the main unit
Repeat steps (a) to (d) to change minutes. Press SET. 2. Display will now show “STRIDE LENGTH” flashing. (Default value 70cm, setting range 30 ~ 180cm)
System Reset Button Model:
Pocket Pedometer GS2027
Power Supply:
3 VDC (One CR2032 battery)
Measurement Range: Number of steps: Calorie: Distance: Time:
10 to 99,999 steps 0.0 to 9999.9 kcal 0.00 to 999.99 km 12 hour or 24 hour
Memory:
Number of steps: Calorie: Distance:
previous 7 days previous 7 days previous 7 days
Time:
12 hour or 24 hour display
Weight:
20~160kg (In increments of 1 kg) 30~180 cm (In increments of 1 cm)
Setting Range:
Stride Length:
Repeat steps (a) to (d) to change stride length. Press SET. 3. Display will now show “WEIGHT” flashing. (Default value 70cm, setting range 20 ~ 160kg)
Repeat steps (a) to (d) to change stride length. Press SET. Your pedometer set-up is now complete. NOTE:
How To View Your Walking Data
Operating Temperature: -10°C to + 40°C (14°F to 104°F) Precision of step Counting: Time Precision: Battery Life:
●
Within +/- 5% (By vibration testing machine) Within +/- 30 seconds of the average monthly deviation (Under normal temperature) Approx. 7 months. (10,000 steps per day)
If you need to change any of the settings after set-up, you can press SET and hold for 3 or more seconds. The display will show TIME ‘12H’ and follow the instructions above. If there are no buttons pressed within 30 seconds, the display will return to Step mode.
How to change the display Press MODE to view one of the following screens: Clock mode
External Dimensions: Approx. 66.5 x 34 x 8.2mm Weight:
Approx. 18 gram (Including the battery)
Contents:
1 Pedometer, 1 Waistclip Holder, 1 Strap 1 Battery CR2032 and 1 Instruction Manual
Distance mode
*Specifications are subject to change without notice. Calories mode
Getting Started Before using your 3D Pedometer for the first time, you will need to insert the battery and personalise the settings by entering the time, your weight and stride length. First, insert the battery provided (see ‘How to replace the battery’ section in these instructions). The ‘12H’ will start flashing on the display and this is the beginning of the set-up. NOTE: If there are no buttons pressed for 1 minute after inserting the new battery or during set-up, the display will turn off and you will need to press the SYSTEM RESET to start the set-up process again. The SYSTEM RESET button is on the back of the main unit. Use a paperclip or pen and insert, press and hold for a few seconds, this will begin the set-up (and clear any previous data entered), the ‘12H’ will start flashing.
Step mode
Using The Memory Function The GS2027 pedometer can store up to seven days of data for the number of steps, calories burnt and distance walked. The current day data is automatically stored in memory when the time reaches 12:00 AM. The display will return to zero. You do not need to press the RESET button every day. NOTE: The time must be correctly set in the unit. If using the 12hr clock, be mindful that AM/PM display is correct for the time of day.
●
How to view data stored in the memory
●
Press the SET Button under step or calories or distance mode and day memory is showing.
Press MODE Button until the measurement you want is displayed. Step 1 days before
How to Reset the System In the following scenarios, press the SYSTEM RESET button. ● When the battery is replaced ● When you want to delete all memory and set-up data ● When the display becomes unrecognizable
1. Press the SYSTEM RESET button on the back of the main unit, use a paperclip or pen and insert, press and hold for a few seconds. All the memory data and set data (time, weight and stride length) will be deleted. 2. Momentarily, you will see all the characters on the display, then the hour format setting display will appear. You can now set time, weight and stride length. (Refer to ‘How to Set Time, Weight and Stride Length’.)
Distance 1 days before
Paperclip, pen or thin stick
Calories 1 days before
System Reset Button
How To Replace The Battery Press RESET Button. The previous day data is displayed. Continue to press the RESET Button until all seven days of stored data is displayed. Calories Step Distance
Please refer to following diagrams to replace the battery when display dims. Battery Type: Button cell CR2032 Step 1. Open battery cover by using a coin and turning battery cover counter clockwise. Step 2. Replace the CR2032 battery. Step 3. Close battery cover by using a coin and turning battery cover clockwise.
Thin Stick
Step 4. Complete a System Reset. (Refer to ‘How to Reset the System’.)
Press Set Button to return to normal mode. Step
NOTE: The time is not displayed when using the memory function.
How To Delete ‘Todays’ Data Press RESET for over 5 seconds in STEP, DISTANCE or CALORIE mode and ‘Todays’ data will be reset to zero. Distance
Calories
CAUTION: -Contact your healthcare provider/doctor before beginning any exercise program. -Keep the unit out of reach of young children. -If young children swallow any of the pieces, immediately consult a doctor. -Do not throw the battery into a fire as it may explode. -Do not insert the battery with the polarities in the wrong direction. -Always use the correct battery type (CR2032). -Remove the battery from the unit when not in use for a long period of time (2 months or more). -Do not immerse the unit or any of the components in water. The unit is not waterproof. -Do not put the unit in the back pocket of shorts/trousers as you may damage the unit when sitting. -Do not swing/hang the unit by the safety strap, it may cause injury to you, someone else or the unit. WALK WITH ATTITUDE guarantees this product for 12 months after date of purchase. The guarantee does not cover packaging, battery related issues or damages of any kind due to misuse of the unit or any of the components (such as dropping, water related issues, tampering or incorrect usage) caused by the user.
Step
No.101008
