Transcript
INSTRUCTION MANUAL
Razor Ceiling Fan Light Kit Home Depot SKU 110447 (UPC 813291014157) (White)
Razor
Light Kit by Hampton Bay Painted White Finish (3)50-Watt GU10 Bulbs Included Adjustable Shades Universal Mounting System QUESTIONS, PROBLEMS, MISSING PARTS: Before returning to your local Home Depot, please call our Customer Service Team at 1-866-885-4649. Monday-Friday, 8 am-6pm EST. Please reference your SKU(110447) or UPC(813291014157).
Thank you for purchasing this Hampton Bay light kit. This product has been manufactured with the highest standards of safety and quality. Table of Contents: Safety Rules
1
Unpacking Your Light Kit
2
Installing Light Kit
3
Care of Your Light Kit
5
Warranty Information
6
Safety Rules - Read and Save These Instructions 1. WARNING: To reduce the risk of electric shock, ensure electricity has been turned off at the circuit breaker or fuse box before beginning. Note: Turning power off using fan switch is not sufficient to prevent electric shock. 2. All wiring must be in accordance with the National Electrical Code and local electrical codes. Electrical installation should be performed by a qualified licensed electrician. 3. This light kit is supplied with a universal mounting system and will attach to Hampton Bay fans with a center plug in the switch-cap. For assistance, please call 1-866-885-4649. 4. Do not use water or detergents when cleaning the light kit. A dry dust cloth or lightly dampened cloth will be suitable for most cleaning.
1
Unpacking Your Light Kit
Unpack your light kit and check the contents. You should have the following items: A
C
B D
A. B. C. D.
Wire nuts (2) Light kit (1) 50Watt GU10 bulbs (3) Pull chain (1)
2
Installing Your Light Kit
STEP 1 Remove the cover from the switch housing below the fan motor by removing the mounting screws. Refer to Figure 1. STEP 2 Remove the center plug from the switch housing cover. Refer to Figure 1.
STEP 3 Remove the lock washer and hex nut from the top of the light kit. Insert the black and white wire from the light kit through the center hole of the switch housing cover, thread the switch housing cover onto the light kit. Re-install lock washer and hex nut and tighten securely. Refer to Figure 2. Black Wire
Switch housing Light Kit
Screw Switch housing cover
F ig u re 1
3
Screw Center Plug
Pull Chain
STEP 4 Locate the blue and white wires inside the switch housing for the light kit connection. Connect the blue wire from the fan switch housing to the black wire from the light kit and the white wire from the fan switch housing to the white wire from the light kit. Attach the wires together using the wire connectors supplied on the fan light wires. Refer to Figure 3. STEP 5 Re-attach the switch housing cover to the switch housing of the fan assembly by aligning the screw holes on the switch housing cover with the screw holes on the switch housing and secure with the screws removed in STEP1. Your ceiling fan light kit installation is finished!
Black Wire Black Wire
Light Kit
Pu ll Cha in
4
Care Of Your Light Kit
Here are some suggestions to help you maintain your light kit. 1. Clean your light kit periodically to help maintain its new appearance over the years. Do not use water when cleaning. Use only a soft brush or lint-free cloth to avoid scratching the finish. 2. Cover small scratches with a light application of shoe polish.
Weight of the light kit: 0.685kg
5
Hampton Bay Lifetime Limited Warranty The retailer warrants the light kit to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser. The retailer also warrants that all other light kit parts, excluding any glass , to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the date of purchase by the original purchaser. We agree to correct such defects without charge or at our option replace with a comparable or superior model if the product is returned to the retailer. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All costs of removing and reinstalling the product are your responsibility. Damage to any part such as by accident or misuse or improper installation or by affixing any accessories, is not covered by this warranty. Because of varying climatic conditions in the United States this warranty does not cover any changes in brass finish, including rusting, pitting, corroding, tarnishing or peeling. Brass finishes of this type give their longest useful life when protected from varying weather conditions. Servicing performed by unauthorized persons shall render the warranty invalid. There is no other express warranty. The retailer hereby disclaims any and all warranties, including but not limited to. Those of merchantability and fitness for a particular purpose to the extent permitted by law. The duration of any implied warranty which cannot be disclaimed is limited to the time period as specified in the express warranty. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you. The retailer shall not be liable for incidental, consequential, or special damages arising out of or in connection with product use or performance except as may otherwise be accorded by law. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives specific legal rights, and you may also have other rights which vary from state to state. This warranty supersedes all prior warranties. Shipping costs for any return of product as part of a clain on the warranty must be paid by the customer.
6
