Transcript
Dibea GT100 Aurora Robotic Vaccum Cleaner
Instruction Manual
Content
地贝清洁
时尚便捷
Safety Instructions Product Components Main body Charging accessories Remote control 2.4 CLEAN button Product operation Considerations Quick operation Cleaning modes Scheduling Using water tank Product maintenance Clean side brush, rolling brush and mop Clean dust tank and filters Clean sensors and charging poles Troubleshooting Error sheet Product specifications In the box
18
1. Safety Instructions
地贝清洁
时尚便捷
Before using this product, please read the safety instructions and follow all those regular safety precautions. 1. Only authorized technicians can disassemble the product. Users are not allowed to disassemble or repair the product. 2. Only use the original battery and power adapter of the product for charging. Using other un-matched adapter may cause electric shock, fire or product damage. 3. Do not touch the power cord, plug or adapter with wet hands. 4. Do not use this product in wet or moist environment (any environment with liquid), e.g. bathroom or laundry. 5. Do not use near curtains,wrapping materials,or any objects that may be winded in the drive wheels. 6. Before use, collect the floor environment (remove all the fragile objects and cords, clothing, papers, loose cables, as well as make sure to lift curtains and drapes off the floor to avoid any possible accidents. In case that a loose cable is tangled with the product, the cable might move around with the product as it works and topple down the table, chairs, or cabinet and might cause hurt or properly damage.) 7. Do not use this product near cigarette, lighter, match or any flammables. 8. Never use the product to clean combustible or highly volatile liquids, such a as gasoline. 9. Only use the product indoors, do not use outdoors. 10. If the product needs cleaning, clean it after it's fully charged. 11. Do not over-bend or put anything heavy or sharp onto the charging cord. 12. Do not sit on top of this product or attach an object on the top of it. Beware of children or pets while the product is in operation. 13. Do not place this product where it is easy to drop off (tables, chairs, etc). 14. Turn off the power switch during product transportation or when you don't need to use this product for a long time. 15. Before charging, check whether adapter and outlet are properly connected. 16. To avoid tripping, inform all the people in the house when this product is working. 17. When dust bin is full, empty it before using. 18. Use this product in temperature from 0℃ to 40℃. 19. Do not use this product in high-temperature environment or under direct sunlight for a long time. 20. The battery must be removed from the product before it is scrapped. 21. The battery should be disposed of properly for safety . 22. The adaptor must be removed from the socket-outlet before cleaning or maintaining the appliance or removing the battery. Warning: This appliance can only be used by children of 8 years old and above. For persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, proper supervision or instruction should be given concerning use of the appliance in a safe way to help them understand the hazards involved. Children should not play with the appliance. Cleaning and user maintenance should not be made by children without supervision. 2
2､ Product Components
地贝清洁
时尚便捷
Main body bumper ON/OFF button
cliff sensor
nose wheel side brush
charging pole battery cover rubber wheel
rolling brush dust bin
dust bin power socket switch button interchange button
3
2､ Product Components
地贝清洁
时尚便捷
Dust bin
primary filter
fine dust filter HEPA filter
dust bin cover
dust bin switch button
Water tank
water tank water inlet
mop
4
2､ Product Components
地贝清洁
时尚便捷
Charging base
indicator light adapter power socket charging poles
Remote control
scheduled time clock time
direction button
clean button Max mode button
plan button
Clock button
spot cleaning button classical mode button self-charging button
5
2､ Product Components
地贝清洁
时尚便捷
CLEAN button on main body state charging
indicator light flashing orange light
finish charging
green light
selecting mode
flashing green light
occuring error
red light
low power
orange light
normally working
green light
6
3､ Product Operation
地贝清洁
时尚便捷
Considerations Before starting the vacuum cleaner, please check the environment as followed.
Move away the cables and cords around to avoid tangling
Lift up the furniture if it is lower than 8cm height when cleaning.
Make sure the carpet fringing won't tangle the machine.
Make sure there are protective railings when it cleans on stairs.
7
3､ Product Operation
地贝清洁
时尚便捷
Quick operation
■
■
charging prepair connect the adapter with the charging base place the charging base against the wall and remove obstacles about 1 meter at two sides and about 2 meters forward plug the adapter into an outlet
turn on the power button turn on the power button on the side of the machine
charging place the vacuum cleaner on the charging base correctly the CLEAN light turns orange means on charging, green means fully-charged.
8
3､ Product Operation
地贝清洁
时尚便捷
Start Cleaning Start cleaning by pressing the CLEAN button on the main body.
Before starting cleaning, make sure the machine is not in sleeping mode. If yes, short press the CLEAN button to wake it up.
Stop Cleaning Press the CLEAN button on the main body to stop working.
Cleaning Modes
Use the remote control to change modes. If the robot is in standby mode, please press the CLEAN button to wake it up first.
9
3､ Product Operation
地贝清洁
时尚便捷
mode In auto cleaning mode, the robot will clean the room automatically. Also, it will adjust the suction according to different surfaces.
Spot mode The robot will spiral intensely when it detects a dirtier area.
Scheduling mode You can preset the cleaning time and the robot will start to clean at the certain time you scheduled everyday.
10
3､ Product Operation
地贝清洁
时尚便捷
Self-charging When the power is lower than 20%, the robot will go back to the charging base automatically. You can also press the make it go charging.
button to
Classical mode The frequently used mode. The robot will clean automatically and avoid obstacles.
Max mode Suitable for a dirty area. In this mode, the robot will turn to the largest suction.
11
3､ Product Operation
地贝清洁
时尚便捷
Scheduling setting Make sure the robot is not in standby or sleeping mode. If yes, press the ClEAN button to wake it up first. Then, you can set the scheduling time.
Set the clock time
Short press the PLAN button, the left 00 of 00:00 will flash.
Change between hour an minute by pressing the directional buttons.
Press the PLAN to save the settings. If you don't press PLAN, settings won't be saved.
12
3､ Product Operation
地贝清洁
时尚便捷
Scheduling
Short press the PLAN button, the left 00 of 00:00 will flash.
Change the time by pressing directial buttons.
Set the certain time, press the PLAN button to save the settings. If you don't press PLAN, settings won't be saved.
Cancel scheduling Set the scheduling time as 00:00, and the scheduling will be cancelled.
13
3､ Product Operation
地贝清洁
时尚便捷
Water tank The water tank and dust bin of GT100 are interchageable. For correct installment,
please refer to related operation instructions. Do not use mopping fuction on carpets or rugs. When the robot is mopping, please pay attention to the water and add more when needed. Do not install the water tank with water when the robot is charging.
Add water Add enough water through the inlet
Install the mop Attach the mop to the bottom of the water tank
Install water tank accessories
Start mopping
Press to take out the dust bin, and install the water tank
Start auto cleaning, and it will mop at the same time
14
4､ Product Maintenance
地贝清洁
时尚便捷
Clean side brush, rolling brush and mop Clean side brushes, rolling brush and mop once getting dirty. Replace them once damaged.
Notes: Remove the rolling brush from the main body by pressing the lock and wash it. Remove the mop from the water tank and wash it with water.
Clean dust bin and filters Clean the dust bin and filters as following tips after every use.
Notes: check the suction and clean the obstacles wash the primary filter every 15-30 days and install it after drying clean the HEPA filter with wet mop instead of washing it with water directly
Clean sensors and charging poles clean the sensors and charging poles with soft dry mop cloth as followed:
15
5､Troubleshooting
地贝清洁
时尚便捷
Error sheet
times of beep
cause
wheel failure
cliff sensor or bumper failure
solution
check the wheels
check the cliff sensor and bumper move it to a new place and
main body gets stuck
side brush failure
restart
check the side brush
Notes In case you still can't solve the problem, please follow this: 1. Press the power button on the side of the machine to restart it. 2. If the problem can't be solved by restarting, please contact the after-service team.
16
6､ Product Specifications
地贝清洁
时尚便捷
Main body Voltage (V)
14.4
Power (W) Adapter Input voltage (V)
〜
Output voltage (V) Charging base Output voltage (V) Output current (A) Remote control Input voltage (V)
17
7､ In the Box Item Main body
地贝清洁
时尚便捷
Quantity
Charging base Remote control Adapter Cleaning brush User manual Side brush HEPA filter Mop Water tank
18
Suzhou Dibea Electrical Technology Co., Ltd. www.dibea.com
