Transcript
Remote control Pinch to release the Battery tray Battery tray
Bluetooth Hi-Fidelity Speaker and Handsfree Speakerphone
Volume +
Instruction Manual
Previous / Back
Start / Pause Next / Forward Volume -
Model: SB-1
Pick-up
Battery: CR2025 (included)
Drop-call
Remove the plastic tab before using the remote control for the first time. Some function on the remote control may not be compatible with older models of Bluetooth device.
Setup Instructions
Components Speaker
Soundpipe Bluetooth Speaker System
1. Place 4 fresh AAA batteries in the speaker, or use the AC adapter to connect the speaker to a power outlet.
AC Adapter
2. Slide the power switch to the “ON” position.
Remote control
3. The LEDs on the top of the speaker will glow “On”
Instruction Manual Auxiliary 3.5mm cable
3.
AC Adapter
Remote Control Instruction Manual
1. Auxiliary
Speaker Pick-up
2. OFF
ON
3.5mm cable
Pairing with a Bluetooth enabled Audio Visual device like: iPad, iPhone, smartphone and etc.
Volume -
1. Press the “Pick-up” switch on top of the speaker for more than 3 seconds or press and hold the “Pick-up” button on the Auxiliary line-in Volume + Left speaker
DC input
Power switch
Drop-call
Microphone
remote control to enter pairing mode. 2. The LEDs will begin flashing slowly, signaling that the Bluetooth speaker (Device ID: SB-1) is ready to be discovered by your Bluetooth enabled device. 3. The password for pairing is “0000”.
Right speaker
4. Refer to your device manual to enable Bluetooth, discover new device and set as wireless stereo. 5. When pairing is successful the LEDs will blink quickly and stop. 6. Pairing only needs to be performed once, the speaker will remember up to 8 devices. Battery cover latch
7. Make sure the Bluetooth device remains within 20 ft of the Soundpipe speaker. 8. The Bluetooth speaker will auto reconnect with the Bluetooth device when it is within range.
Acoustic Venting Opening
Battery cover
Using the Soundpipe as a handsfree speakerphone. 1. Power up the Soundpipe and pair it with a Bluetooth enabled mobile phone.
Slide the battery cover latch to release the battery cover, insert 4 AAA batteries (not included).
2. To answer an in-coming call, press the “Pick-up” push button switch on the speaker or on the remote control.
Remove batteries when not using speaker for a long period of time.
3. To reject or hang-up a call, press the “Drop-call” push button switch on the speaker or on the remote control.
Connecting speaker
Trouble Shooting No Power 1) Slide the Power switch to the “ON” position. 2) LEDs will light indicating the speaker is powered. 3) Check that the AC Adapter is connected correctly. 4) If using batteries, check the direction of the batteries installation and the condition of the battery.
Wall outlet
Soundpipe warrants its product to be free from material or workmanship defects but is not liable for damages due to misuse or abuse beyond normal usage. You may have other rights or terms which vary from states and countries. Please visit manufacturer’s website for more information: www.SoundpipeUSA.com
Specifications: No Sound
Computer MP3 Player CD Player
Auxiliary 3.5mm cable
iPod....
Slide the Power switch to the “off ” position when connecting the AC adapter. Disconnect the “Aux Line-in” from the speaker when listening to Bluetooth device.
Output Power: 5.6 Watts (2.8 + 2.8 Watts)
1) Make sure the Bluetooth device is paired and connected.
Frequency Response: 100 Hz to 20k Hz
2) Turn up the volume to a desire level.
Distortion: 1 kHz ,≦1 % THD+N
3) Start music to be played on the device.
Signal to Noise Ratio: 96 dB
4) When listening to Bluetooth device, please make sure the “Aux Line-in” is disconnected from the speaker.
Aux Input Impedance: 4kΩ
Warranty Congratulations on your purchase! Soundpipe products come with a 1 year limited warranty from the date of purchase from an authorized retailer.
AC Adapter: 100 to 240 V AC, 50/60 Hz Power Supply: 4 AAA batteries or AC adapter Remote Control Distance: 10ft Certificate: FCC, CE Bluetooth Technology: V2.1 + EDR Class 2 Interface Support: HFP, HSP, A2DP, AVRCP
