Instruction Manual

Transcript

3-864-747-41(1) Connector section RESET button 1/u button and indicator Disc cover § button Memory card slots Instruction Manual Thank you for purchasing the “PlayStation” video game console. You can enjoy playing CD-ROM discs with both the “PlayStation” logo and [PAL] designation, and audio CDs with this unit. Before operating the unit, please read this manual and retain it for future reference. Controller ports L2 button, R2 button, L1 button, R1 button Directional buttons ¢ , ® , ✕ , π buttons START button Analog mode switch SELECT button SCPH-7502 © 1995, 1996, 1997, 1998 A Left stick, Right stick L3 button, R3 button 2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. WARNING To prevent shock hazard, do not insert the plug cut off from the mains lead into a socket outlet. This plug cannot be used and should be destroyed. Caution The use of optical instruments with this product will increase eye hazard. Read before operating your “PlayStation” A few people may experience epileptic seizures when viewing flashing lights or patterns in our daily environment. These persons may experience seizures while watching TV pictures or playing video games. Even players who have never had any seizures may nonetheless have an undetected epileptic condition. Consult your doctor before playing video games if you have an epileptic condition or should you experience any of the following symptoms during play: altered vision, muscle twitching, other involuntary movements, loss of awareness of your surroundings, mental confusion, and/or convulsions. This appliance is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT MARKING is located on the bottom of the “PlayStation”. Precautions Your”PlayStation” is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. About the nameplate The nameplate is located on the bottom of the “PlayStation”. Precautions On safety About the discs • The laser beam emitted from the lens of your “PlayStation” is harmful to the eyes. Do not disassemble the casing. Servicing should be carried out by qualified personnel only. • Should any solid objects or liquid fall into your “PlayStation”, unplug it immediately and have it checked by qualified personnel before any further use. • When not in use, disconnect your “PlayStation” from the mains. When disconnecting, grasp the plug and pull it from the wall socket. Never pull the cord itself. You can use the two kinds of discs with your “PlayStation”: CD-ROM discs with both “PlayStation” logo and [PAL] designation, and audio CDs. On handling discs • Do not leave the discs near heat sources or in direct sunlight or excessive moisture. • Store the discs in their cases when they’re not in use. • When handling the discs, do not touch the surface. Hold them by the edge. • Do not stick paper or tape on the discs. • Do not write on the discs with a marker, etc. For your health • Be sure to take a break of about 15 minutes during every hour of play. • Do not play a game when you are very tired or short of sleep. • Play in a well lit room, sitting as far from the screen as the cord will allow. On operation • Operate your “PlayStation” only on 220 - 240 V AC, 50 Hz. • Do not cover your “PlayStation” during use as heat may build up internally. • Avoid rough handling or mechanical shock and do not put any heavy objects on your “PlayStation”. This could damage the console or the disc. • Do not leave your “PlayStation” near heat sources, or in a place subject to direct sunlight (operating temperature: 5˚C-35˚C), excessive dust or sand, moisture, rain, on an uneven surface, or in a car with its windows closed. • If your “PlayStation” causes interference to radio or television receptions, turn it off or move it away from those appliances. • Do not touch the lens inside the disc cover. To protect the lens from dust, keep the disc cover closed except when inserting or removing a disc. If the lens is not clean, your “PlayStation” may not operate properly. • Your “PlayStation” is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. On moisture condensation If your “PlayStation” is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside. Should this occur, your “PlayStation” may not operate properly. In this case, remove the disc for several hours until the moisture evaporates. If your “PlayStation” still does not operate properly, ring the “PlayStation” service line number listed on your customer service card. Do not connect your “PlayStation” to a projection TV Do not connect your “PlayStation” to a projection TV unless it is the LCD type. Permanent damage to your TV screen could otherwise result. Never analyse or remodel your “PlayStation” Use your “PlayStation” following the instructions in this manual. Sony Computer Entertainment Inc. expressly prohibits the analysis or remodelling of the “PlayStation”, and also prohibits the analysis, use of its circuit configurations without express written permission of Sony Computer Entertainment Inc. Unpacking Table of contents 3 Check that you have the following items: Console Analog Controller AC Power Cord AV Cable (integrated audio/video) WARNING 2 Precautions 2 Unpacking 3 Connecting your “PlayStation” to a TV set 4 Playing a game 5 Analog Controller usage 6 Using the Memory Card 7 Playing an audio CD 8 Enjoying the SoundScope 9 Troubleshooting 10 Specifications 13 4 Connecting your ”PlayStation” to a TV set Connecting to a TV with audio/video inputs IMPORTANT INFORMATION For the customers in Australia A few models of television sets or monitors may display a bouncing or other incorrect screen effect when connected to the “PlayStation”. Any applicable warranties offered by Sony Computer Entertainment Australia Pty. Ltd. may be limited or disclaimed in some particular cases of this occurrence. Should you experience any difficulties for whatever reason with your “PlayStation” please contact the nearest “PlayStation” Hardware Help Line listed in every “PlayStation“ game manual. For the customers in New Zealand A few models of television sets or monitors may display a bouncing or other incorrect screen effect when connected to the “PlayStation”. Any applicable warranties offered by Sony Computer Entertainment New Zealand, a division of Sony Music Entertainment (New Zealand) Ltd. may be limited or disclaimed in some particular cases of this occurrence. Should you experience any difficulties for whatever reason with your “PlayStation” please contact your country “PlayStation” Hardware Help Line listed in every “PlayStation“ game manual. Connect your “PlayStation” to the TV using the supplied AV Cable (integrated audio/video), making sure you match the colours on the plugs and terminals. If your TV is monaural, do not connect the red plugs. If you want to hear both left and right sounds from a monaural TV, use a commercially available 3-phono to 2-phono (stereo to monaural) type audio/video cable. After connecting Set your TV to the appropriate video input mode. (Refer to the instruction manual of your TV.) 5 Playing a game 1 Press § (open) button. The disc cover opens. A Restarting a game 2 3 4 Insert a disc with the label side up. Press RESET. Be careful not to press RESET while playing the game, or the game will end. Close the disc cover. Press 1/u (on/standby) button. The 1/u indicator lights up. After the start-up screen, screen C1 appears and the game begins. Set the supplied Analog Controller to the appropriate mode for the software (see page 6). B Removing a disc Press §. While pressing the central spindle gently, pick up the disc holding the edge. Tips • When you end a game, press §, remove a disc and press 1/u to turn off the “PlayStation”. • If you turn on your “PlayStation” without first inserting a disc, screen C2 appears. It gives you access to the audio CD control screen and the Memory Card activity screen, described later on in this manual. If you insert a CD-ROM disc of the “PlayStation” format while screen C2 is on, the game will start automatically. • If the screen C3 appears, the inserted disc might be of a different format. Check if it has both the “PlayStation” logo and [PAL] designation on it. A damaged or dirty disc would also produce this screen. See ”Troubleshooting“ on page 10. A B RESET Notes • There is no need to turn off the “PlayStation” if you want to change games. Just open the disc cover and wait until the disc stops spinning, swap the discs over and then press RESET. • When inserting a disc, push the disc gently but firmly until it sits snugly on the central spindle. MWARNING § C 1 2 3 Before removing a disc, press the § button and make sure that the disc completely stops. Never touch the disc while it is spinning. Otherwise, you may hurt yourself or damage the disc or your “PlayStation”. C Screens that appear after the start-up screen When you turn on your “PlayStation”, one of the following screens will appear. 1 A CD-ROM with both “PlayStation” logo and [PAL] designation is inserted. 2 No disc is inserted. 3 A disc that cannot be played with the “PlayStation” is inserted. 6 Analog Controller usage A A Mode switching and LED display B L2 button L1 button R2 button SELECT START button button Analog mode switch R1 button ¢ button Directional button This Analog Controller (DUAL SHOCK) can be switched between two modes by pressing the analog mode switch. Each time the analog mode switch is pressed, the mode changes as follows. Digital mode (LED : Off) ® button µ Analog mode (LED : Red) ✕ button LED π button LED: Off Analog mode switch C Note After checking the “ ” marks on the software, switch to the appropriate mode for use. Note however, that some software makes this adjustment automatically. In such cases, the analog mode switch is overridden by the software. For details, refer to the software instruction manual. B Digital mode (LED : Off) * Before using the controller, rotate the sticks once with your thumbs as if drawing a circle, as shown in the diagram at left. Do not twist the sticks. You can use this controller in the same manner as the SCPH-1080 Controller. C Analog mode (LED : Red) R2 button L2 button L1 button Supports software with “ R1 button SELECT button START button ¢ button ® button Directional button ✕ button π button Right stick / R3 button * Left stick / L3 button * Analog mode switch LED: Red * The R3 button and the L3 button function when the stick is pressed. ” mark. Vibration function This Analog Controller (DUAL SHOCK) is a touch sensitive controller with a vibration function. The vibration function can be set to ON or OFF on the monitor with the software. The function of each button may vary depending on the software played. Refer to individual software instruction manuals for further details. Notes • When the Analog Controller (DUAL SHOCK) is not used, turn the PlayStation off or unplug the controller from the “PlayStation”. • Before using the vibration function of this controller, please read the following notes on safety. For safety • Stop using this unit immediately if you become tired or if you experience unpleasantness or pain in your hands or arms while using. If the condition persists, consult your doctor. • Do not attempt to operate the controller with anything other than your hands. Do not operate the controller with, or attach it to; your head, elbows, other bony parts of your body, face, or stomach. • Absolutely do not use the vibration function of the Analog Controller (DUAL SHOCK) if you have any ailment in the bones or joints of your hands or arms. • Absolutely do not use the vibration function of the Analog Controller (DUAL SHOCK) when your fingers, hands, wrists, or arms are broken, dislocated, or sprained; or if you have a pulled muscle. These ailments may become worse due to the vibration of the controller. • Do not continue to use the Analog Controller (DUAL SHOCK) for a long time. Take a rest at about 30 minute intervals. Using the Memory Card You can save and load game data using the optional SCPH-1020 Memory Card. Each Memory Card has 15 memory blocks. A You can copy game data from one Memory Card to another or delete unnecessary data, by bringing up the Memory Card screen. Set the supplied Analog Controller to digital mode (LED: Off). 8 1 2 2 .... Insert Memory Card (or two Memory 3 3 .... Select “MEMORY CARD” with the Cards). directional buttons and press the ® button. 4 5 6 Directional buttons Select “EXIT” on the Memory Card screen with the directional buttons and press the ® button. 1 Contents of Memory Card 1. The game data is displayed as icons. 2 Icon. The number of icons corresponds to the number of used memory blocks. 3 Arrow pointer. 4 Copy the selected game data. 5 Copy all the game data on the selected card. 6 Delete the selected game data. 7 Exit from this screen. 8 Contents of Memory Card 2. 9 Displays of the game name and other details of the selected data. B B Memory Card operation ® button MEMORY CARD 1 MEMORY CARD 2 Check that the card you’re copying to has enough memory blocks, then select “COPY”. 2 ... Select the card containing the data to be copied. 3 ... Select the icon for the data to be copied. 4 ... Select “YES”. Or select “NO” to cancel copying. Notes • You cannot copy the data to a card that does not have enough empty blocks. Delete unnecessary data. • Do not remove the card until the icons stop moving. Copying all the game data 1 ... Check that the card you’re copying to has enough memory blocks, then select “COPY ALL”. 2 ... Select the card to be copied . 3 ... Select “YES”. Or select “NO” to cancel copying. Cancelling the Memory Card screen A Memory Card screen 7 1 ... 1 ...... Turn on your “PlayStation” before inserting a disc. 9 Copying game data How to use the controller for the Memory Card screen • To move the arrow pointer: Press the directional buttons. • To select the items: Press the ® button. Tip You can also operate using the optional SCPH-1090 Mouse. Notes • Do not remove the card until the icons stop moving. • If the data you want to copy already exists on the card, the data will not be copied. Deleting game data 1 ... Select “DELETE”. 2 ... Select the card that has the data you wish to delete. 3 ... Select the icon of the data you wish to delete. 4 ... Select “YES”. Or select “NO” to cancel deleting. 7 8 Playing an audio CD A 1 !¢ 2 !∞ 3 !§ 4 Your “PlayStation” can also play audio CDs. There are two control methods for the audio CD facility. • Selecting the buttons on the audio CD screen operation (A) • Pressing the buttons on the controller (direct key operation, C) Set the supplied Analog Controller to digital mode (LED: Off). Note As the two ways above work at the same time, be sure not to confuse the operation. Selecting audio CD operation 5 !¶ 6 !• 7 8 9 0 B Insert an audio CD and turn on the power. You can also insert an audio CD after turning on the power. (You do not have to turn off your “PlayStation” when changing CDs.) Cancelling audio CD operation Select “EXIT” on the screen with the directional buttons and press the ® button. A Audio CD screen !¡ !™ !£ C = 1 2 3 4 5 6 7 + 0 ) Directinal buttons ® button Start SoundScope (see page 9) 8 9 0 !¡ !™ !£ !¢ (, P !∞ !§ !¶ !• Find the start of the next track Fastforward Play Stop Pause Rewind Find the start of the current or previous track Displays the selected playback mode. Play a single track or all tracks repeatedly. Play all tracks on the disc in order. Change the playback time display. Play the tracks in random order. Play selected tracks in a specified order. Displays the current track number, and the elapsed or remaining playback time. Press the “TIME” button to switch the display. Arrow pointer Select the track number(s) from a grid showing all the tracks on the CD. Display track numbers higher than 20 (appears only when there are more than 20 tracks on a CD) Cancel audio CD operation B Various playback modes How to use the controller for the CD operation screen • To move the arrow pointer: Press the directional buttons. • To select the items: Press the ® button. Tip You can also operate using the optional SCPH-1090 Mouse. Playing a CD through to the end once Select “(”. Playing tracks on a loop • To repeat the current track, select “REPEAT” until “REPEAT 1” appears. • To repeat all the tracks, select “REPEAT” until “REPEAT ALL” appears. To resume normal play, select “REPEAT” until “REPEAT” indication disappears. Programming a sequence of tracks 1 .... Select “PROGRAM”. 2 .... Select the track number you want to play. Repeat this step until you have selected all the tracks you want to include. 3 .... Select “(”. To resume normal play, select “CONTINUE”. Playing tracks in random order 1 .... Select “SHUFFLE”. 2 .... Select “(”. To resume normal play, select “CONTINUE”. C To operate the CD directly with the controller Using the buttons on the controller, you can control basic CD operations without looking at the screen. Enjoying the SoundScope Playing Audio CDs on your “PlayStation” will activate the SoundScope feature, a graphical representation of the music you are playing (A). Using the buttons on the controller, you can choose your favorite picture from 24 patterns, change the color of the picture or add the effect of an afterimage. You can also save and load your SoundScope settings using the Memory Card. When enjoying SoundScope, set the supplied Analog Controller to digital mode and operate the CD directly with the controller (LED: Off). A B 1* 3 2* 4* 5* Changing and Storing the settings 1 .... During playback, press R1 button while holding down ✕ button. A mark flashes on the lower right of the screen (D!¢). 2 .... Operate the controller. While the mark is lit, any changes you make to the SoundScope operation with the controller are stored. 3 .... When you are finished, press R1 button while holding down ✕ button. The mark disappears and the procedure is completed. Starting SoundScope operation 0 6* Press SELECT button when the CD operation screen is displayed. Do not unplug the controller during the procedures. Returning to the CD operation screen Press SELECT button. !¡ 7 8* !™ 9 !£ * : Press these buttons while holding down ✕ button to save your operation or change the size of the picture. For details, see "D Additional operations". C B!¡ B6 D !¢ B!£ !∞ B9 Note Switching to stored settings 1 ... During playback, press L1 button while holding down ✕ button. A mark appears on the lower left of the screen (D!∞), and the SoundScope picture is transformed by the stored operation. 2 ... Press L1 button while holding down ✕ button. The mark disappears and the procedure is completed. B SoundScope operation 1 - 5 Audio CD operation: 1 Find the start of the current or previous track. 2 Rewind 3 Play / Pause 4 Fastforward 5 Find the start of the next track. 6 Shorten the interval of displayed pictures. 7 Change the pattern of the picture. 8 Lengthen the interval of displayed pictures. 9 Return to the CD operation screen. 0 Add the effect of an afterimage to the picture. !¡ Select the pattern of the picture in random order. !™ Use this button with others for additional operations. !£ Change the color of the picture. Tip Your stored setting is lost when you turn off the “PlayStation”. If you want to keep the data, you can save and load it by using the Memory Card with one memory block. Saving the stored operation in the Memory Card Press R2 button while holding down ✕ button. A mark appears on the upper right of the screen (D!§). Note B!£ B8 For the CD operation screen • To move the mouse pointer(+): Move the Mouse. • To select the items: Press the left mouse button. !§ !¶ C Operation with the Mouse You can store only one custom setting of SoundScope operation. If the data already exists, it is erased. You can also operate SoundScope using the Mouse (SCPH-1090E: sold separately). Refer to B for the operation. Loading the data in the Memory Card D Additional operations Changing the size of the picture Press the directional buttons (up or down) while holding down ✕ button. Press L2 button while holding down ✕ button. A mark appears on the upper left of the screen (D!¶). To use the loaded data, follow the procedure above. 9 10 Troubleshooting 1 2 3 4 Symptoms If you experience any of the following problems, read the instructions for the specified “Check” or “Diagnosis”. 5 6 7 8 9 10 11 No sound ___________________________________ Check 1 No picture on the screen. ______________________ Check 2 The picture and the sound skip. _________________ Check 12 The screen and the sound freeze or the game (or audio CD) stops playing. _________ Check 13 The game (or audio CD) does not start. ___________ Check 6 The controller does not work.___________________ Check 14 A game (or audio CD) that once worked perfectly, now no longer does. __________________ Check 17 You cannot save game data using the Memory Card.________________________________ Check 18 The vibration function of the Analog Controller does not work. _______________________________ Check 14 The picture and the sound are picking up noise or static _______________________________ Diagnosis E The error message appears on the screen. ________ Diagnosis F 11 1 Is the TV volume set properly? If not, adjust the volume. Make sure “mute” is not selected on the TV. If the problem persists, bCheck 2 2 Is the channel position or input selector of the TV set correctly? If not, set it to the correct position. If the problem persists, bCheck 3 3 Checks Is your “PlayStation” correctly connected to the TV or the VCR with the correct cable? If not, connect it correctly. If the problem persists, bCheck 4 4 Is the AC Power Cord connected to your “PlayStation” and the mains socket? If not, connect the AC Power Cord firmly to the “PlayStation” and to the mains socket . If the problem persists, bCheck 5 5 Is the power turned on to both your “PlayStation” and the TV? If not, turn on the “PlayStation” and the TV. If the problem persists, bCheck 6 6 Is a disc inserted in your “PlayStation”? If not, insert a disc. If the problem persists, 7 bCheck 7 Is the inserted disc either a CD-ROM disc with both the “PlayStation” logo and [PAL] designation or an audio CD? Insert such a CD-ROM disc or an audio CD. If the problem persists, bCheck 8 8 9 10 Check to see if the "PlayStation" is set to pause mode. If “Yes”, cancel it. If the problem persists, 11 Did you bring your “PlayStation” directly from a cold to a warm location before you inserted the disc? If “Yes”, b Diagnosis C If “No”, b Check 12 12 Is your “PlayStation” placed on a stable surface? Install the “PlayStation” in a flat stable place. Do not shake or vibrate the “PlayStation”. If the problem persists, b Check 13 13 Check to see if other games (or audio CDs) work correctly. If “Yes”, b Diagnosis If “No”, b Diagnosis If not, connect it to the controller connector of the “PlayStation”. If the problem persists, b Check 15 15 Is the Analog Controller set to the appropriate mode for the software? If not, switch to the appropriate mode. If the problem persists, b Check 16 16 Check to see if other controllers work correctly. If “Yes”, b Diagnosis If “No”, b Diagnosis correctly. If “Yes”, b Diagnosis If “No”, b Diagnosis If not, insert the disc with the label side up. If the problem persists, bCheck 10 D F 17 Check to see if other games (or audio CDs) work If not, close it firmly. If the problem persists, Is the disc inserted with the label side up? A B 14 Is the controller connected to your “PlayStation”? Is the disc cover closed firmly? bCheck 9 b Check 11 A F 18 Is the Memory Card properly inserted in the unit? If not, insert it in the Memory Card slot of the unit. If the problem persists, b Check 19 19 Are there empty blocks on the Memory Card? Keep empty blocks on the Memory Card. If the problem persists, b Diagnosis G 12 A There is a problem with the disc. Clean the underside of the disc with a CD cleaner and try to play it again. To clean the disc, refer to the instruction manual of the CD cleaner. If the problem persists, the disc may be defective. B The lens may be dirty. Clean the lens by using a plastic lens cleaning kit. To clean the lens, refer to the instruction manual of the plastic lens cleaning kit. If the problem persists, ring the “PlayStation” service line number listed on your customer service card. Diagnoses C Moisture condensation has occured on the disc. Remove the disc and leave it until the moisture evaporates, or clean the underside of the disc using a CD cleaner. D There is a problem with the controller. Ring the “PlayStation” service line number listed on your customer service card. E Check the connection between your “PlayStation” and the TV (or VCR). Insert the plugs of the connecting cable firmly into the connectors. If the picture and the sound are still noisy, the plugs may be dirty or there may be a short circuit inside the cable. If the problem persists even after trying another cable, ring the “PlayStation” service line number listed on your customer service card. F There is a problem with your “PlayStation”. Ring the “PlayStation” service line number listed on your customer service card. G There is a problem with the Memory Card. Ring the “PlayStation” service line number listed on your customer service card. Specifications General Power requirements: 220 - 240 V AC, 50 Hz Power consumption: 10 W Dimensions: 270 x 60 x 188 mm (w/h/d) Mass: 1.2 kg Operating Temperature: 5˚C-35˚C Laser diode properties •Material: GaAlAs •Wavelength: l=780 nm •Emission duration: Continuous •Laser output: Less than 44.6 µW (measured at a distance of 200 mm from the lens surface on the optical pick-up block) Inputs/outputs on the front Controller ports (2) Memory Card slots (2) Inputs/outputs on the rear SERIAL I/O port (1) PARALLEL I/O port (1) Output on the rear AV MULTI OUT output (1) Supplied accessories AC Power Cord (mains lead) (1) AV Cable (integrated audio/video) (1) Analog Controller ("DUAL SHOCK") (1) Instruction manual (1) Optional accessories SCPH-1020 E SCPH-1040 E SCPH-1080 E SCPH-1090 E SCPH-1110 E SCPH-1122 SCPH-1130 E SCPH-1140 E SCPH-1160 E SCPH-1180 E SCPH-1200 E Memory Card Link Cable Controller Mouse Analog Joystick RFU Adaptor AC Power Cord AV Cable (integrated audio/video) AV Adaptor Analog Controller Analog Controller (DUAL SHOCK) Design and specifications are subject to change without notice. 13 “ “Sony” is a registered trademark of Sony Corporation. ” and “PlayStation” are registered trademarks of Sony Computer Entertainment Inc. “DUAL SHOCK” is a trademark of Sony Computer Entertainment Inc. Printed in Japan.