Instruction Manual

Transcript

19 TFT LCD TV INSTRUCTION MANUAL MODEL: LTV-19WS Please read all the safety and operating instructions carefully before you begin. Safety class This is an IEC safety class I product and must be grounded for safety. CONTENTS IMPORTANT SAFETY INSTRUCTIONS........................................................................................................................1-2 PREFACE.......................................................................................................................................................................... 3 WARNING AND CAUTIONS.......................................................................................................................................... 4-6 SPECIFICATIONS ACCESSORIES................................................................................................................................7 INSTALLATION TV ASSEMBLY DRAWINGS...................................................................................................................................... 8 FRONT....................................................................................................................................................... ............... 9 BACK.........................................................................................................................................................................10 PC..............................................................................................................................................................................10 ANTENNA................................................................................................................................................................. 11 AV EQUIPMENT........................................................................................................................................................12 BATTERY INSTALLATION (REMOTE CONTROL UNIT)................................................................................................ 13 REMOTE CONTROL DESCRIPTION.......................................................................................................................14-16 OPERATION INSTRUCTIONS Using the On-Screen Display (OSD)......................................................................................................................... 17 Image adjust.............................................................................................................................................................. 17 Audio Adjust.............................................................................................................................................................. 18 Tuner ........................................................................................................................................................................ 18 PC.............................................................................................................................................................................. 19 Function..................................................................................................................................................................... 19 Parental Controls................................................................................................................................................. 19-20 Movie Rating............................................................................................................................................................. 21 CA Eng Rating.......................................................................................................................................................... 21 CA Fr Rating.............................................................................................................................................................: 22 Parental Lock............................................................................................................................................................ 22 Factory Reset........................................................................................................................................................... 22 Color Temp............................................................................................................................................................... 23 Screen Format ......................................................................................................................................................... 23 TROUBLESHOOTING GUIDE........................................................................................................................................ 24 PERSONAL COMPUTER.............................................................................................................................................. 24 IMPORTANT SAFETY INSTRUCTION Important safety instruction 1.Read these instructions. 2.Keep these instructions. 3.Heed all warnings. 4.Follow all instructions. 5.Do not use this apparatus near water. 6.Clean only with dry cloth. 7.Do not block any ventilation openings. Install in accordance with manufacturer instructions. 8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including Amplifiers) that produce heat. 9.Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for you safety. 10.Protect the power cord from being walked on or pinched. 11.Only use attachments/accessories specified by the manufacturer. 12.Unplug this apparatus during lightning storms or when unused for long periods of time. 13.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 14.Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. 15.A warning that an apparatus with class I construction shall be connected to a MAINS socket outlet with a protective earthing connection. -1- IMPORTANT SAFETY INSTRUCTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN! CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE COVER (OR BACK).NO USE-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. The symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT PLACE ANY OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES ON THE UNIT. -2- PREFACE Thank you very much for purchasing this product. To enjoy your set to the finest from the very beginning, read this manual carefully and keep it handy for future reference. INSTALLATION Position the TV in the room where light does not strike the screen directly. Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Allow enough space between the receiver and the wall to permit ventilation. Avoid excessive warm locations to prevent possible damage to the cabinet or premature component failure. This AC power can be connected to AC 100-240 volts, 50/60Hz. Do not cover the ventilation openings when using the set. CAUTION Never tamper with any components inside your set, or any other adjustment controls not mentioned in this manual. All LCD-TVs are high voltage instruments. When you dust or clean the LCD Panel or Cabinet with a dry or damp cloth, make sure the power cord is removed from the receptacle. During thunder and lightning storms, unplug the power cord and antenna cord to prevent your LCD TV set from damage. All repairs in this TV should be performed only by qualified TV service personnel. -3- WARNINGS AND CAUTIONS Caution SOURCE MENU VOL- VOL+ CH- CH+ Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver. Caution Do not insert anything in the ventilation holes. If metal or something flammable enters, it may result in fire or electric shock. SOURCE MENU VOL- VOL+ CH- CH+ Caution Do not place objects on this unit, it may damage the screen surface. SOURCE MENU VOL- VOL+ CH- CH+ Caution SOURCE MENU VOL- VOL+ CH- CH+ Do not squash power supply cord under the television receiver. Caution SOURCE MENU VOL- VOL+ CH- CH+ Do not throw anything at the set. The screen glass may explode by impact and cause serious injury. -4- WARNINGS AND CAUTIONS Caution Never stand on, lean on or roughly push the television or its stand. You should pay special attention to children. Serious injury may result if it should fall. SOURCE MENU VOL- VOL+ CH- CH+ Caution SOURCE MENU VOL- VOL+ CH- CH+ Do not place your television on an unstable cart, stand, shelf or table. Serious injury to an individual, and damage to the television may result if it should fall. Caution SOURCE MENU VOL- VOL+ CH- When the television receiver is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet. CH+ Caution SCALE Do not block the ventilation holes on the back cover. Adequate ventilation is essential to prevent failure of electrical components. 1.000 Warning SOURCE MENU VOL- VOL+ CH- CH+ Avoid exposing the television receiver to direct sunlight and other sources of heat. Do not stand the television receiver directly on other items which give off heat .E.g.video cassette players and audio amplifiers. Do not place naked flame sources, such as lighted candles on the television. Do not expose the LCD screen surface to the sun as it may damage the screen surface. -5- WARNINGS AND CAUTIONS Warning Do not connect too many appliances to the same mains socket as it could result in fire or electric shock. Do not place objects on this unit as it may damage the screen surface. Warning SOURCE MENU VOL- VOL+ CH- High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel. CH+ Warning SOURCE MENU VOL- VOL+ CH- CH+ To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture. Warning SOURCE MENU VOL- VOL+ CH- For you own safey, do not touch any part of the set, main lead or aerial lead during lightning storms. CH+ Caution SOURCE MENU VOL- VOL+ CH- CH+ If the television is to be built into a Compartment or similarly enclosed, the minimum distances must be maintained. Heat build-up can reduce the life of your television, and can also be dangerous.. -6- SPECIFICATONS Specificatons Model LCD panel Television system AV system Channel coverage Analog RGB mode Y Pb/Cb Pr/Cr mode Resolution Display Color Comb Filter Contrast Brightness Viewing angle Response Time OSD language Power source Power consumption Audio power Lamp life Video/Audio terminals Supplied accessories LTV-19WS 19 INCH TFT LCD NTSCPAL-M PAL-N PAL-4.43MHz-50Hz NTSC-3.58MHz-60Hz SECAM-4.29MHz-50Hz NTSC-4.43MHz-60Hz PAL-3.58MHz-60Hz PAL-4.43MHz-60Hz VHF Low 53 153 VHF High 153 453 UHF 453 803 PAL-3.58MHz-50Hz 640X480/ 60Hz, 800X600/ 60Hz, 1024X768/ 60Hz,1280X720/60Hz,1280X1024/60Hz 480i,576i,480P,576P,720P,1080i 1440X900 16.2 million colors Adaptive 2/4 line 500:1 2 400cd/m 170° (H)/170° (V) 12ms English/French/Spanish/Portuguese AC 100-240V , 50/60Hz 60W 2W+2W 50,000 hours RF input: Cable/ antenna RF x1 VIDEO input: Y Pb/Cb Pr/Cr x1 AV x1 S-Video x1 GRAPHIC input: Analog RGB 15pin x1 AUDIO input: PC audio x1 Y Pb/Cb Pr/Cr audio x1 AV audio x1 Remote control, AC cord, Instruction Manual, Batteries. AC ADAPTOR *Design and specifications are subject to change without notice. Accessories: One Remote Control One AC cord Two AAA size batteries 1 4 7 2 0 5 8 3 6 9 -7- One AC ada pter TV ASSEMBLY DRAWINGS 1. Mount the LCD TV on the walll. Step1: Rotate the base of the TV sets and make sure that the bottom plane of the base is parallel to the rear cabinet. Step2: Fix the whole TV sets on the wall. Refer to drawings below: WALL -8- INSTALLATION FRONT SOURCE SOURCE MENU MENU VOL- VOL+ CH- CH+ VOL- VOL+ CH- CH+ KEYS: 1.CH+: channel up select, it is equivalent . 2.CH-: channel down select, it is equivalent . 3.VOL+: volume up adjust, it is equivalent . 4.VOL-: volume down adjust, it is equivalent . 5.MENU: to enter into menu operation. 6.SOURCE: press the button once to select a signal source.It is "OK" function when the menu is displayed. 7.POWER: press the key to turn off the set (standby). 8.(Power on/standby)indicator:Lights up in green when the set is working. When in standby mode, the indicator light red. BACK SCALE 1.000 AUDIO DC 12V IN VGA IN AUDIO IN Y PC IN 1.Power input(*) 2.PC Audio input 3.Analog RGB input 4.YPbPrCbCr input Pb/Cb Pr/Cr R L/MONO AV R L/MONO S-VIDEO IN 75W ANT. IN 5.YPbPrCbCr Audio input 6.AV input 7.AV/S-VIDEO Audio in 8.S-VIDEO input 9.Antenna (*): When switching the power off, please do not switch it back on within five (5) minutes -9- INSTALLATION PC STEPS: 1.Make sure both the LCD TV and Computer are Powered Off. 2. Connect VGA Cable from computer to the TV. 3 Connect the Audio cable. 4. Connect power cord 5. Power On the LCD TV first, then Power on the computer. This sequence is very important. 6. Make sure both computer and LCD TV are powered off before unplugging any one of the connections. Do not directly pull off the cords as it could cause damage. Note: Please don't open the Cover. SCALE 1.000 AUDIO DC 12V IN VGA IN AUDIO IN PC IN Y Pb/Cb Pr/Cr R L/MONO AV R L/MONO S-VIDEO IN 75W ANT. IN CAUTION: Make sure both computer and TV are power off before unplug any one of the connections. Do not directly pull off the cords as it would cause damage. -10- INSTALLATION ANTENNA SCALE 1.000 -11- INSTRUCTION AV EQUIPMENT This TV provides one group of YPbCb/PrCr input terminals including one group of CVBS,S-VIDEO terminals for connection to VCR,DVD or other video equipment. To enjoy high quality picture, please refer to the owner's manual of the equipment to be connected as well. You can use the YPbCb/PrCr and CVBS,S-VIDEO input terminals on TV set rear as follows. VIDEO EQUIPMENT with terminal W VIDEO EQUIPMENT with terminal R Y Yellow (video) W White(audol L,mono input) R Red(audio R) To audio outputs To video outputs Y W Y R R W Power Input Y Pb R Pr Y W R W AUDIO DC 12V IN VGA IN AUDIO IN PC IN Y Pb/Cb Pr/Cr R L/MONO AV IN *Please keep AC cord unplugged when connecting TV system. -12- R L/MONO S-VIDEO IN 75W ANT. BATTERY INSTALLATION (REMOTE CONTROL) Insert Batteries Into the Remote Control 1. Remove the battery cover. 2. Insert the 2 AAA 1.5V batteries,ensure correct polarity (+ or -) 3. Replace the battery cover. Replace with new batteries when the LCD TV operates unsteady or when the LCD TV shows no response to the remote control. Note: 1. Alkaline battery recommended. 2. Remove batteries when they are flat or if the remote control has not been used for a long time. 3. Do not mix new and old batteries or different types/brands. -13- REMOTE CONTROL DESCRIPTION Remote control description 10 1 21 6 1 2 3 4 5 6 7 8 9 11 2 20 9 0 19 7 5 15 18 16 22 17 4 3 12 13 8 14 1.POWER (STAND BY) BUTTON ( ) Press this button to turn on or turn off (Standby mode). By pressing the Power button, video and audio should appear on the screen within a few seconds. 2.PROGRAM SELECTION BUTTON (0-9 BUTTONS) Push the number for your desired program and the program indicator will be displayed on the screen. 1.To input a one-digit number(0-9):press button to display"-",then press 0-9 digit button. 2.To input a two-digit number(10-99):press button to display "--",then press two digit button in order to input the channel number.For example, you need channel 25, please input "2" button followed "5" button. 3.To input a three-digit number(100-134):press button to display "---", then press three digit button in order to input the channel number. 3.VOL+/- BUTTONS (VOL+/-)(TV top control key) Press VOL+/- buttons to adjust sound level. -14- REMOTE CONTROL DESCRIPTION 4.CH+/- BUTTON(TV top control key) 1.Press the CH+/- button to select the program forward. 2.Press the CH+/- button to select the program backward. 5.ENTER BUTTON Press this button to confirm the setting in On-Screen Display 6.SLEEP BUTTON This button is used to set the sleep timer from 10 minutes to 120 minutes. Time will display on Bottom- Center and decrease in seconds when one minute remains. TV will go into standby mode when time is up. To switch off this function, press this button step by step until "off" is displayed. 7.INFO BUTTON Press this button to display program number, system etc on the screen. Source : Audio : CH NO : TV Mono 0 8.RETURN BUTTON Press this button to return to the previously viewed program. 9.INPUT BUTTON ( ) (TV top control key) Press this button to display external video signal such as VCR or DVD player. *Remark: VGA TV AV S-VIDEO YUV 10.MUTE BUTTON ( ) Press once to mute the sound, press again to return to previous sound level. 11.MTS BUTTON When a stereo program is received, you can select STEREO/MONO/SAP. 12.SYSTEM BUTTON Press this button to select AIR/IRC/HRC/STD format at NTSC TV signal. 13.SOUND BUTTON Press this button to select the sound mode:Personal/Concert/Music/Vocal. 14.PICTURE BUTTON Press this button to select the user picture mode:Personal/Standard/Bright/Mild. 15.AUTO BUTTON Press this button to automatically adjust picture at PC signal. -15- REMOTE CONTROL DESCRIPTION 16.SCREEN BUTTON Press this button to select the screen format:Fill Screen/4:3(Video Format). 17.CC BUTTON Press this button to setup the Closed Caption. 18.V-CHIP BUTTON Press this button to setup V-Chip. 19.EXIT BUTTON This button exits the OSD menus. 20.MENU BUTTON This button is used to display the OSD. 21.TV BUTTON Switch to TV source directly. 22.FREEZE BUTTON Press this button has no function. -16- OPERATION INSTRUCTIONS Using the On-Screen Display (OSD) The remote control or the bottom control keys on the front panel of the TV can control all the function settings. The on-screen display (OSD) allows you to adjust and save contrast, brightness and other settings. The TV will save changes made to the settings. even if the TV is turned off. 1.Turn on the TV 2.Press to select the signals *Remark: VGA TV AV S-VIDEO YUV If no signal is input, then a blue background appears. 3.Press menu button and the OSD will display. Press or to select the item you want to change. 4.Press the Menu button on the front of the TV or the menu button on the remote control. The Main Menu will be displayed on the TV screen. 5.Use the CH (+/-) buttons on the front of the TV or on the remote control to select one of the submenus-Image, Audio, Tuner, PC, Function or Special Features. 6.Once the submenu is highlighted, press "OK"button to enter the submenu, press menu to quit current submenu.use the CH(+/-) buttons on the front of the TV or buttons on the remote to select a menu option. 7.Use the Volume (+/-) buttons on the front of the TV or buttons on the remote control to select or adjust the options settings. 8.repeat steps 5 through 7 to adjust additional options within this menu. 9.Once the adjustments are completed, press the Exit button on the remote control to exit the OSD completely. Menu Image Audio Tuner PC Function :Sel Picture Mode Backlight Brightness Contrast Hue Saturation Sharpness :Modi Personal Bright 76 58 36 46 11 OK : Conf Menu : Exit Image adjust Menu Image Audio Tuner PC Function :Sel Picture Mode Backlight Brightness Contrast Hue Color Sharpness :Modi Personal Bright 76 58 36 46 11 OK : Conf Menu : Exit Picture Mode---Select from one of the following: Personal/Standard/Bright/Mild Backlight--- Select from one of the following: Bright/Mild/Standard Brightness---Adjusts the black levels of the picture.Users may need to readjust the brightness after the TV warms up -17- OPERATION INSTRUCTIONS Contrast-Adjusts the level of white between the lightest and darkest portions of an image, If the contrast is too low,the picture appears dark and lacks detail. If The contrast is too high, the picture appears faded and lacks shadow and depth. Hue-Adjusts to make the flesh tones more natural. Color-Adjusts the levesl of white and color in the picture.Highly saturated colors then to be deep and strong while unsaturated colors are weaker and lighter. Sharpness-Adjusts the clarity of the picture.If the sharpness is set too high,hard edges in the picture appear to have a ghost image. Audio Adjust Menu Image Audio Tuner PC Voloume Bass Treble Balance Auto Volume Sound Mode 15 0 0 0 On Personal Function :Sel :Modi OK : Conf Menu : Exit Volume-Adjusts the volume. Bass- Adjusts the low-pitched sound . Treble- Adjusts the high-pitched sound Balance-Adjust the balance level between the channels. Auto Volume-(ON/OFF)Volume level of the channels will stay the same, independent of the broadcast signal. Sound Mode---Select from one of the following: Personal/Concert/Music/Vocal. Tuner Menu Image Audio Tuner PC Channel No. Channel System Skip Channel Fine Tune Auto Scan 111 STD No 0 Press Function :Sel :Modi OK : Conf Menu : Exit Channel No.--- Select the channel . Channel System---Select the format(AIR,STD,IRC,HRC) of NTSC signal. Skip Channel--- Delete the set channel from the channel list. Fine Tune---Press button Search the best possible picture and sound are obtained.If signal is weak, the fine tuning is necessary. Auto Scan---Searching and storing all available broadcast channels for you. -18- OPERATION INSTRUCTIONS PC Menu Image Auto Tuner PC Following modes are strongly suggested for set up mode. RESOLUTION V.Freq.(Hz) 50 50 90 50 H Position V Position Phase Clock Auto Adjust Auto Color Press Press Function :Sel :Modi OK : Conf H.Freq.(KHz) GRAPHIC MODE 640x480 59.940 31.469 VGA 800x600 60.317 37.879 VGA 1024x768 60.004 48.363 VGA 1280x720 59.870 47.776 VGA 1280x1024 60.020 63.981 VGA Menu : Exit H Position---Adjusts the horizontal position on the image adjustment. V Position---Adjusts the vertical positionl on the image adjustment. Phase---Adjusts the effect of image. strongly suggested: Don't adjust the item. Clock---Adjusts the size of image. Auto Adjust---Automatically adjust picture at PC signal. Auto Color---Automatically adjust color at PC signal. Function Menu Image Audio Tuner PC Function :Sel OSD Language OSD Timer OSD Position CC Mode Parental Controls Factory Reset Color Temp. :Modi English 10 3 Off Press Press Press OK : Conf Menu : Exit OSD Language---Select from one of the following: English/French/Spanish/Portuguese OSD Timer--- Select the displayed time of the OSD from 10s to 60s. OSD Position--- Select the position of the OSD. CC Mode--- Select from one of the following: Off/CC1/CC2/CC3/CC4/TEXT1/TEXT2/TEXT3 /TEXT4. Parental Controls The parental function operate by remote control. The Parental Controls feature prevents viewers from watching programs that are not age-appropriate, such as programs containing violence or adult language. Menu Image Enter PIN ---- Auto Tuner PC Function :Sel :Modi OK : Conf Menu : Exit Press the digital buttons on remote control to enter code. The original code is 1111. If you want to clear the code, press and hold the "OK" button on the remote control for five (5) seconds under the "Enter PIN" menu. -19- OPERATION INSTRUCTIONS Menu Image Auto Tuner PC Function :Sel Change PIN Clear All TV Rating Movie Rating CA Eng Rating CA Fr Rating Parental Lock :Modi Press Press Press Press Press Press On OK : Conf Menu : Exit Change PIN---Change the code. Menu Image Auto New PIN Re-Enter PIN ---- Tuner PC Function :Sel :Modi OK : Conf Menu : Exit Clear All---Clear the Ratings. Menu Image Clear All Yes No Auto Tuner PC Function :Sel :Modi OK : Conf Menu : Exit TV Rating Menu Image Auto Tuner PC Function :Sel Rating TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA :Modi Allow FV OK : Conf D L S V Menu : Exit Use the CH+/- buttons on the front of the TV or on the remote control to select the item you want to alter and press " OK" button to setup or cancel . The window will allow the user to setup the following TV ratings: Y(all children) Y7(older children) G( general audience) PG(guidance suggested) 14(strongly cautioned) MA(mature audience) -20- OPERATION INSTRUCTIONS Use the CH+/- buttons on the front of the TV or on the remote control to select the item you want to alter and press " OK" button to setup or cancel . You can also customize the TV rating for the following content: FV(fantasy violence) D(sexual dialog) L(adult language) S(sexual situations) V(violence) Movie Rating Menu Image Audio Tuner PC Function :Sel Rating MPAA G MPAA PG MPAA PG-13 MPAA R MPAA NC-17 MPAA X :Modi Allow OK : Conf Menu : Exit Use the CH+/- buttons on the front of the TV or on the remote control to select the item you want to change and press " OK" button to setup or cancel . The window will allow the user to setup the following MPAA movie ratings: MPAA G(general audience). MPAA PG(parental guidance suggested). MPAA PG-13(recommended for children 13 years of age or older). MPAAR (mature audience). MPAA NC-17(no one under 17 years of age). MPAA X( no one under17 years of age). CA Eng Rating Menu Image CA Eng Rating Auto Tuner Function :Sel :Modi OK : Conf E C C8+ G PG 14+ 18+ Menu : Exit Use the CH+/- buttons on the front of the TV or on the remote control to select the item you want to change and press " OK" button to setup or cancel . The window will allow the user to setup the following Canadian English Language Ratings: E:Exempt. C:Children. C8+:Children 8 years and older. G:General program, suitable for all audiences. PG: Parents guidance. 18+:Adult program. -21- OPERATION INSTRUCTIONS CA Fr Rating: Menu Image CA Fr Rating E G 8 ans+ 13 ans+ 16 ans+ 18 ans+ Auto Tuner PC Function :Sel :Modi OK : Conf Menu : Exit Use the CH+/- buttons on the front of the TV or on the remote control to select the item you want to alter and press " OK" button to setup or cancel . The window will allow the user to setup the following Canadian French Language Ratings: E:Exempt. G:Children. 8ans+: Children 8 years and older. 13ans+:Children 13 years and older. 16ans+:Viewers 16 years and older. 18ans+:Adult program. Parental Lock Menu Image Auto Tuner PC Function :Sel Change PIN Clear All TV Rating Movie Rating CA Eng Rating CA Fr Rating Parental Lock :Modi OK : Conf Press Press Press Press Press Press On Menu : Exit Turns TV Rating / movie Rating/CA Eng Rating/CA Fr Rating blocking on or off. Factory Reset Menu Image Audio Tuner PC Function :Sel OSD Language OSD Timer OSD Position CC Mode Parental Controls Factory Reset Color Temp. :Modi OK : Conf Press "OK" to resume the originally setting. -22- English 10 3 Off Press Press Press Menu : Exit OPERATION INSTRUCTIONS Color Temp Menu Image Audio Tuner Color Temp. Red Color Green Color Blue Color Personal 202 206 206 PC Function :Sel :Modi OK : Conf Menu : Exit Use the CH+/- buttons on the front of the TV or the remote control to select one of the submenus -Color Temp./Red Color/Green Color/Blue Color. The Red color /Green color/ Blue color/ may adjust only the color Temp be set personal. Use the VOL+/- buttons on the front of the TV or ont the remote control to adjust. Screen Format Press screen button on the remote control to select the Screen format. Fill screen --- each format signal is displayed to fill the screen. 4:3 --- Conventional 4:3 picture size, full picture information. Fill screen 4:3 Note :In VGA source, format 4:3 is unavailable. -23- TROUBLESHOOTING GUIDE TROUBLESHOOTING GUIDE SYMPTOM No power Poor/no picture Poor/no sound TV shuts off POSSIBLE CAUSE The AC power cord is not connected The switch is switch off TV station experiencing problems Picture setting is not adjusted Possible local interference Double images or ghosting Only snow and noise appears on the Screen Some tiny black points or bright points on the screen Noisy picture when viewing a TV channel Good picture, no sound TV station experiencing problems Possible local interference Good picture ,noisy sound Sleep timer is set Off timer is set POSSIBLE SOLUTION Connect the AC power cord to the AC outlet Turn on the switch Try another channel Check picture control adjustments Check for source of reception Check aerial cable connections Check if the aerial cable is broken or bent. The picture of a LCD Display is composed of pixels. It is not a malfunction Using the menu system, select the "Channel setting"to adjust Fine Tune to obtain better picture reception Press the + - or (mute) Try another channel Check for source of reception disturbance Check the "sound sys" Set sleep timer to "off" Clear off timer PERSONAL COMPUTER The computer is in power saving mode.Try Pressing any The NO INPUT SIGNAL message key on the computer key board. appears on the screen Check the computer power is"on". Check the cable is properly connected. No picture If the input signal out of range message appears on the screen Check the video frequency range is within that specified for the monitor ,adjust the frequency range to the following: Picture is fuzzy Using the menu system, adjust "Brightness" and "Contrast". If the set doesn’t turn on when you turn the AC power on, please turn off AC power and wait a moment, then turn on AC power. If you feel the pictures is glaring,please adjust the lightness of backlight. -24-