Transcript
REGULAR DISPLAY AND BUTTON OPERATION Date Hourly chime S1
S3
Day of the week
Timer Alarm time
12 Hour format am/pm Hour
Seconds S2
S4
Minutes
Chronograph BUTTON OPERATION :
INSTRUCTION MANUAL
S1
Set
S3
Adjust, start/stop
S2
Mode
S4
Light
HOW TO CHANGE THE DISPLAY MODE
HOW TO DISPLAY CALENDAR
S3
S2
S2 Chronograph
Alarm
Normal time
S2
Calendar
S2 Second time zone
Timer
HOW TO SET NORMAL TIME Hold for 2 seconds
S2
S1
S2
S2
Seconds
S2
Hours
S2
Minutes
S3
S2
Months
S3
Jours
S3
S2 Day of the week
S3
S3
S3
S3
Reset seconds
+1 Hour
+1 Minute
Advance month
Advance date
Advance day
24 Hours format
SET SECONDS
SET HOURS
SET MINUTES
SET MONTHS
SET DATE
SET DAY OF THE WEEK
SET 12/24 FORMAT
HOW TO SET ALARM TIME
HOW TO USE ALARM AND CHIME DISPLAY
S1
S2
12 Hour format
x2
S3
S2 Alarm
Alarm time setting display
+1 Hour
S3
S2 Minutes
Alarm
Alarm on
Alarm on/chime on
S3
S3
S3
S3
S2 + 1 Minute
Normal time alarm
Second time zone alarm
Alarm off/chime off
Alarm off/chime on
HOW TO USE THE CHRONOGRAPH S3
S1
S3
S2
S2 Chronograph
Start running
Reset
Stop
Normal time
LAP
S1
S1
First lap read
S1
S1 S1
S1
second lap counting second lap read
S3
S1
Last lap counting
Last lap read
Stop time
HOW TO USE TIMER SET TIMER
Serrer 2 secondes
S3
S1
S2
x3
S3
S2 Timer
Set hours
S3
S2
+1 Hour
set minutes During the last 10 seconds of the countdown, the alarm will beep (BI) once per second
+1 Minute
Set seconds
+1 Second
By pressing S3 button to start and stop
When the timer reaches zero, the alarm will sound tree beeps (BI-BI-BI) per second for 10 seconds. You can silence the alarm by pressing any button
S3
S2
BI-BI-BI
BI
BI
BI
Start
HOW TO SET SECOND TIME ZONE
Timer
HOW TO USE EL LIGHT
Hold for 2 seconds
S1
S3
S2
x4 Seconds time zone
Set hours
S1
S2
+1 Hour
S4
Note:
S3
1. This watch features an electro-luminescent (EL) backlight, which tends to lose illuminating power very long use. 2. The illumination provides by backlight may hard to see under direct sunlight.
S2 30 Minutes
Set minutes
CARE OF YOUR WATCH
FEATURES AND SPECIFICATIONS
1. This watch contains precise electronic components. Never attempt to open the case or remove the back cover. 2. Do not operate buttons while underwater, or while swimming or diving. 3. Should water or condensation appear in the watch, immediately have the watch checked. Water can corrode electronic parts inside the case. 4. Avoid severe impact: The watch is designed to withstand impact under normal use. Do not subject it tio severe impacts or rough usage, and do not drop it on to hard surfaces. 5. Avoid exposing the watch to temperature extremes. 6. Clean the watch with a soft cloth and clean water only. Avoid using chemicals, especially soap.
1. Standard display mode: Hour, Minutes, Seconds, Month, Day of the week. 2. Function: - Month, Date AM/PM and Electro-Luminescent light. - Alarm function with lap operation. - Chronograph function with lap operation. - Hourly chime. - 12/24 hour format switch option. - Timer. - Second time zone. 3. Accuracy at normal temperature (25°C): ±30 seconds a month. 4. Normal operating temperature range: 10°C~40°C.
7. Keep your watch away from strong electric fields and static electricity.
MODEL
DATE OF PURCHASE
OFFICE DEALER STAMP
W&O Group
W&O Group - 46 rue Cauchy - 75015 Paris - Tel. +33 (0)1 45 54 03 86
[email protected]
Become a fan on Facebook
