Instruction Manual

Transcript

Instruction manual Contents 1. Safety precautions 2. Parts list 3. Assembly (1) (2) (3) (4) Rear wheel/Rear wheel axle assembly Main frame unfolding Seat assembly Safety guard/canopy assembly 4. How to operate (1) (2) (3) (4) (5) Folding Seat operation ( seat reclining adjustment/seat separation for rear-facing) Footrest /safety guard Swivel front wheel lock/brake Safety harness 5. Cup holder 6. Installation/removal of the seat 7. Other safety instruction 8. Cleaning and Maintenance 9. Warranty 1. Safety precautions Please read through the instruction manual before using the product. Type B is suitable for infants between 7months and 2 years of age. It is recommendable to limit the continuous use of the product within one hour. Do not put more baby than fixed number. Do not put the baby other place than hammock. Make sure that safety belt (5-point harness) is fastened before using Do not let the baby stand alone in the center of the stroller. Do not lift or move the stroller with the baby in the stroller. Tighten the safety belt to fit the baby in order to prevent the baby from falling out. It is important to make sure that the stroller is completely unfolded and stretched, and the safety locking device is perfectly locked every time seating the baby in the stroller. Keep the speed of the stroller within walking speed of the protector. Do not run at the cross road with traffic signals. Do not run even on the flatland. Do not put toys or objects with strings around the baby in the seat of the stroller. Take the baby out of the stroller at uneven land including the heel, slope, stairs and escalator and move the stroller separately. Protector s special care is required even on the mild slope. Care needs to be taken so as the baby s fingers or toes are not caught in the gap when adjusting the back rest angle, converting the handle and operating the canopy. Stroller may be overturned by the change of center of gravity, if the baby in the stroller moves too much towards shoulders, right, left, forward or backward. Caution: This seat is unsuitable for babies under six months of age. Do not place hot or heavy object on the tray. ,“Warning” and “caution” signs are classified in accordance with the expected danger in case of failure of meeting “Danger” safety precautions. Therefore, it is important to follow the instructions. Danger Improper handling may cause the user high level of danger including death or heavy injury and an absolute emergence. Warning Improper handling may cause the user high risk of danger including death or heavy injury. Caution Improper handling may cause the user the risk of injury or property damage. Caution Please keep the instruction manual in the safe place for continuous safe use of the product. 2. Parts list shoulder belt seat reclining lever safety lock device folding button clip waist belt cup holder crotch pad buckle canopy release button canopy safety guard canopy holder seat release button folding safety lock folding lock footrest rear wheel release button swivel front wheel lock footrest adjustment button basket brake 3. Assembly 1. Rear wheel / rear wheel axle assembly Press the rear wheel release button in the middle of the rear wheel as in the picture 1 and connect to axle 2. Follow the same way for the other side of wheel. Insert coupled axis to frame as shown 3 until there is a clicking sound. In case click sound is not heard when wheel axle is connected to frame, please check for making sure wheel does not fall out when pulled by hand before use. In case the frame is completely folded after stroller is opened, rear wheel axle assembly may not be smooth. In this case, unfold the frame firstly following the instructions in step 2 and assemble the rear wheel axle. Attention In case rear wheel release button does not restore to its original position when it is pressed, please separate it by pressing one more time and assemble it again. If the same symptom occurs even though same procedure is taken one more time, do not use it and contact the store where you bought the stroller and get replacement or use it after A/S. Please check once again whether wheel is connected to wheel axle properly, and wheel axle is connected to the frame properly. 2. Main frame unfolding Picture 1 Picture 2 To unfold the stroller, please release the folding lock ① as shown in figure 1 first. Firstly, grab the handle with one hand and grab the folding handle ③ on both sides with the other hand and pull the handle ② to arrow direction, then frame will be unfolded. Attention Be careful not to put your fingers in the folding area when unfold the stroller. Please check again to make sure stroller is unfolded and fixed properly. Before you unfold the stroller, Please check there is no kid around. 3. Assembly 3. Seat assembly You can install the seat both forward-facing and rear-facing. Assemble it to the direction according to time and preference. As shown in the picture left, assemble the insertion area and seat connection area located both sides of the frame to fit exactly with each other. When separating seat, press seat release button located on the upper part of both sides of the assembled seat simultaneously and pull upward and separate. Attention Make sure to check if brake is locked before seat assembly. Be careful not to put your finger in the connecting area when assembling the seat. 4. Safety guard / canopy assembly To maximize the safety of the child, safety guard is installed in addition to the seat belt. Safety guard is installed by inserting guard release button into guard holder ②. Guard release button in opposite side can be installed by same manner by rotating same direction as arrow ③. Make sure safety guard is installed correctly before use. Canopy installation can be done by connecting shade release button ① to the shade holder ② as shown on the picture in left. Attention Please pay attention not to put your hand in the gap when installing safety guard. In case angles of the canopy release button on both sides are different, install the canopy after checking “Other instructions” in page 12. 4. How to operate 1. Folding 一 This product can be folded for storage and movement purpose. Firstly, press the safety lock device (black color) ① located on the bottom part of the center of the stroller handle to arrow direction and at the same time press the folding button (gray color) ② by pressing to arrow direction and release it. Release the folding button and push down the handle to arrow ③ direction. Attention Stroller can be tipped over when pressed excessively hard. Hold the folding safety knob located at the right side with right hand and press the folding safety lock ④ located at the top of the left folding knob with left hand. Attention Folding safety lock can be damaged in case it is pressed too strongly. 4. How to operate Hold the right side folding knob and press the folding safety lock at left side of folding knob to arrow ⑤ direction, and pull it gently until the end. Pull it toward body until the end with two hands. Attention When folding or unfolding the stroller, keep the baby away from the stroller. Make sure the folding lock device ⑥ which operates auto matically is fastened properly. Take the reverse order for unfolding. Attention In case it does not operate properly, stop using and contact the store where you bought the product. 4. How to operate 2. Seat operation (reclining adjustment / seat separation for rear-facing) 1step : Seat mode 2step : Rest mode 3step : Sleep mode Seat reclining can be adjusted up to 170 ◦ degrees via 3 step. Desired angle can be adjusted by lifting up seat reclining lever ① as shown by arrow. Seat reclining can be adjusted up to 3 levels for both of forward-facing and rear-facing. Seat of this stroller can be separated and available for both forward-facing or rear-facing position. Seat can be separated by pressing seat separation button ® on the right and left side of the safety guard and pull it to upward direction. Attention When adjusting seat reclining angle, make sure to use it after locking the break. 3. Footrest adjustment / safety guard adjustment Press the footrest adjustment button ① located at both ends of both footrest and desired angle adjustment can be done via 8 step. Safety guard can be opened and used as shown in arrow ②. 4. How to operate 4. Front wheel direction setting / Break operation When road surface level is flat (fixed status is released) When road surface is not flat (fixed status is maintained) Break set Break release Use this stroller with the condition that direction of front wheel is fixed toward front side in order wheel is fixed and moves only forward. When using this on the even road, move down the front wheel lever and release the fixing before use. The stroller is fixed when the break located between the rear wheels is pushed down. (To release, lift the break up conversely, then fixing is released and stroller can move.) When the front wheel fixing lever is lifted up, front wheel is fixed and only forward movement is possible. Warning Even though break is set, do not leave the baby alone to prevent any emergency case happen. 5. Safety belt adjustment As shown on the left picture, insert the left and right clip of waist belt into buckle. (When releasing, push down the buckle①, then clip is separated.) Adjust the length of the belt according to body shape of the baby using regulating ring. Warning Make sure of fastening the safety belt when seating the baby. Adjust the belt to fit the baby’s body shape. 5. Installation of cup holder Warning - Do not use cup holder to put hot drink (e.g. coffee) even for the container with a lid. There is the risk of burn in case beverage is spilled. - When folding the stroller or changing the seat, make sure to remove beverage from cup holder. Mount the cup holder from top to bottom until click sound is heard as shown in the picture. Check whether cup holder is safe. At this point, rotate the cup holder to be placed upright and put drink for parent or baby. Attention -Make sure to check whether beverage container to be used can be fixed stable before use. - If securely mounted container or cup is not used, beverage can be spilled over or flow out. -Cup holder is designed and manufactured only for S9 stroller. In case it is used for other stroller, there can be damage or stroller can be destroyed. -In case cup holder is used when stroller is put on uneven or rough terrain, beverage can flow or be spilled. 6. Installation/Removal of the seat cover Picture 1 Picture 2 Seat cover can be separated. After detaching the canopy, separate the Velcro (back of the seat) in six locations marked in picture 1 from zipper and separate the buttock stand from the seat as shown in the picture 2. Take reverse order to install the seat cover. 7. Other safety instructions When installing canopy, there could be the case that both side angle of the connecting area are different as shown in picture 1. This can be the case which may happen during production and packaging stage and it is not the case to determine that product itself is defective. Picture 1 Picture 3 Picture 2 If the angle is different, connection is done from one side as shown in picture 2. By folding as shown in picture 3 and making the angle of both side same and it can be used normally. Attention Canopy angle adjustment cannot be done in separated state, 8. Cleaning and Maintenance For safe and long term use of the product, it is important to check the condition of the fabric regularly. Cleaning the stroller Baby fabric detergent should be used in lukewarm water under 30C to wash fabrics. Do not use chemical detergent, oily detergent, or cleaning apparatus. Be careful of using washing machine, as it may reduce the life of fabric. When cleaning the frame, use soft cleaning agent (cloth pad, cotton) to prevent the peeling. Hand wash in 30˚C water chloride bleaching dry-cleaning Attention There may be slight discoloration by washing. This is natural because the product contains no color-fixing agent, commonly used to keep the color but harmful to human health. Drying Dry the product in the cool place with good ventilation after washing. Attention Do not leave the fabric in the direct sunlight for a long time to avoid discoloration of fabric. Maintenance Frame For safe and long term use of the product, it is important to check the condition of the fixing nuts and bolts of the frame and other parts. In case of any problem found, stop using the product and contact the customer center of PREBEBE (1688 - 1375), the official sales corporation. Wheel In case there is noise around the wheels, apply adequate amount of lubricant or liquid grease and remove the residues. 9. Warranty PREBEBE, the official sales corporation of FEDORA distributes and sells authenticated products that have passed the stringent quality control. PREBEBE warrants the quality of FEDORA products as long as the product is purchased from its official dealers. Warranty service lasts for a year after receiving the product. However, some cost for our service will be required for the following cases: - Malfunction caused by abnormal operation other than instructed in the manual Any maintenance work done by the 3rd party other than PREBEBE Malfunction caused by natural disaster Malfunction by non-carefulness and/or accident Other malfunction which is not caused by faulty product Abrasion of consumable parts that can happen during the regular use Replacement of parts by loss or breakage For products purchased from the dealers of PREBEBE Korea, warranty service is limited to Korea and services for overseas purchases are not available. Replacement and return of the product Exchange and return of unused product is available within 7 days of receiving the product (as per electro-trade act 17-1). In case the product is not returnable because over 7 days have passed after receiving or there is any trace of using the product, the product will be under A/S. (However, if the product is faulty, part replacement is available.) If the product does not fall under exchange/return regulation, the product will be under A/S. Please contact our customer center (1688 -1375) for more details. Fast treatment for exchange/returns is available for the offline transactions by using the shop where the product was purchased. For replacement/return of online purchases, please contact directly the internet shopping mall where the product was purchased. Deliveries for exchanges/returns should be made through the designated home delivery company after registration with the shop where the product was purchased or with PREBEBE. Additional home delivery cost may occur in case of using other courier than the designated delivery service company. We do not accept the replacements/returns for the following cases, due to loss or damage done to the value of the product. In case the tag is removed from the product In case the packaging is damaged In case of breakage or loss of any component or part In case there is trace of using the product (contamination or marks of assembly) Breakage, malfunction, contamination caused by carelessness of the user We are not able to offer exchange/return services to users abroad. In case the price for the product or parts has changed after purchasing due to changes in the manufacturer’s price, we do not accept any request for refund or compensation for the price gap for the product or parts. Dealers’ orders may be cancelled without prior notice. Customers will have to pay for delivery/return charges in case of request for return and refund because of change of mind. PREBEBE is not responsible for any returns without prior registration for exchange or returns (Do not fail to register with the shop where the product was purchased or PREBEBE customer center for returns.) Please send your questions or complaints to PREBEBE homepage (www. Prebebe.co.kr) or our customer center (1688-1375), and we will answer as promptly as we can. [Complaint/exchange/refund] Please call customer center 1688-1375 (open 10:00 ~ 17:00 / Lunch break: 12:00 ~ 13:00) [For A/S inquiries] call A/S center 031-318-1008 (weekday open hours 09:00 ~17:30 / lunch break 13:00 ~ 14:00) Fedora manufactures products up to safety standards. Copyright on this content remains vested in PREBEBE. Information listed herein may change without notice. PREBEBE holds no responsibility for error or omission in the description contained herein. Official Sales Corporation for FEDORA 54-13, Unji-ro, Tanhyeon-myeon, Pa ju-si, Gyeonggi-do Customer center