Transcript
INSTRUCTION MANUAL STEAM IRON
LI2788CS Please read these instructions manual carefully before using the appliance
Dear Customer Congratulations on being the proud owner of Lloyd Steam Iron. Your Steam Iron comes with a Lloyd Guarantee of Quality. Lloyd takes great pride in providing its customers with perfect products that adheres to international quality standards. Lloyd is committed to provide the ultimate customer satisfaction as nothing brings us greater joy than having satisfied customers of Lloyd. At Lloyd, feedback and suggestions based on your product usage experience are greatly appreciated. Please feel free to contact us at
[email protected]
NIPUN SINGHAL DIRECTOR
Attention: * Please read the owner’s manual before using the product. * Before using, please check the voltage of the product if it is the same with the one in your home. * When using steam ironing and self cleaning function, you are recommended to use distilled water. * The water will leak from the soleplate if using ironing with steam but temperature below level * * . Please note, its a normal phenomenon. * During the iron is electrified, operator must not leave, and let children not touch the iron. *
* After using, turn the steam knob to “
”, turn the temperature
regulating knob to “0”, pull out the plug, put the iron on the smooth and stable place vertically. * If the supply cord is damaged, it must be replaced by the service personnel in order to avoid a hazard. * The iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.
* The iron must be used and placed on a stable surface. * When placing the iron on its stand, ensure that the surface on which the stand is placed is stable. * Children should be supervised to ensure that they do not play with the appliance.
Main features: The product has many functions such as Temperature Regulation, Water Spray, Dry Ironing, Steam Function, Burst of Steam Function etc. and has an aesthetic shape and appeal.
D B
E
C
A
J
F
I
G
K
H
A: Steam Regulation Knob
G: Water tank
B: Steam Burst Button
H: Non-stuick Soleplate
C: Spraying button
I: Spray Nozzle
D: Indicator bulb
J: Cover
E: Cable Retracting Button
K: Self-clean
F: Temperature Regulation knob
How to dry ironing: 1. Turn the temperature regulation knob to “0” position, turn the steam knob to “0” position, put the plug into the socket. 2. Turn the temperature regulation knob to the temperature scale which the ironed clothes required, the indicator will light on, then put the iron on the smooth and stable place vertically. 3. After the indicator turn off, you can begin to iron. How to spray: Press the Spray Button repeatedly, water will spray out from the spraying mouth, at the time, you should keep enough water in the water tank. How to iron with steam: 1. Fill water in the water tank. 2. Use steam ironing, turn the steam knob to the “1, 2, 3” position, the method for regulating the temperature is the same with dry ironing. 3. After indicator turn off, turn the steam knob to the “1, 2, 3” position, steam will spray, you can start to iron. 4. After ironing complete, turn the temperature regulation knob to the “0” position, pull out the plug, take off the water tank, pour out the remaining water, turn the steam knob to the “0” position
How to use Burst of Steam: Press down the Steam Burst Button, the base plate will spray out a strong burst steam. Attention: Strong steam must be used in steam ironing. (The temperature regulation knob must be turned to the steam section). Correct fabric ironing Attention: 1. Heat sensitive clothes ironing, please cover a piece of cloth on the , otherwise the clothes will be burnt. 2. Different material ironing, please adjust temperature according to the heat resistant of the material. Cloth
Temperature Marks in Preferable ironing method
material
setting
Nylon
*
clothes Ironing
the
back
of
clothes
without any water or cover a piece of cloth on the goods you want to iron Synthetic
*
clothes
fabric or Silk
Wool
Dry ironing the back of the
** According to the thickness and
Cotton
***
gauffer to iron with steam. For some
Linen
MAX
fuscous clothes, we
would better adopt to back ironing.
Troubleshooting Inspection Water tank part
Temperature adjusting knob
Steam bore
power supply
Heating body power
Failure No steam
*
Little steam Can not heat up
*
Cloth burnt and shrink Water drop from the steam bore
*
*
*
*
*
*
*
*
* water tank Temperature Clean out without adjusting knob dirts from water in the correct steam bore position or not, choose a right temperature,
check the Check if the indicator light indicator light is is working or on not, and power supply correctly
