Preview only show first 10 pages with watermark. For full document please download

Instructions For Reprocessing Of Tee Probes

   EMBED

Share

Transcript

Instructions for reprocessing of TEE probes The disinfection step with the mikrozid® PAA wipes. Step 1 Step 5 Pre-cleaning Clean the outside of the probe with a lint-free disposable cloth. If necessary, saturate the cloth in with a cleaning solution or cleaning disinfectant solution. Disinfection Wipe the probe with a sporicidal disinfectant cloth. The specified concentration and contact time must be complied with exactly! schülke recommends: gigazyme®, gigazyme® x•tra, mikrozid® sensitive wipes schülke recommends: mikrozid® PAA wipes* Step 2 Step 6 Cleaning Reprocess the probe in a in a bath with an enzymatic or disinfecting cleaning agent. Alternatively, you can also use a disposable wipe saturated with disinfectant solution. Rinsing Thoroughly rinse the probe with a water quality suitable for reprocessing of the following applications, e.g. drinking water, microbial filtered, sterile. Do not use the water multiple times. schülke recommends: gigazyme®, gigazyme® x•tra, mikrozid® sensitive wipes schülke recommends: schülke filtration Step 3 Step 7 Rinsing Carefully rinse the probe under running water to remove any organic or chemical residues. Final drying Dry the probe with a dry, soft cloth. Drying Dry the probe with a dry, soft cloth. * Manufacturer releases: Philips TEE probes Siemens TEE probes Toshiba TEE probes * The releases are limited to certain product families. Detailed information is available through our Customer Care Department. www.schuelke.com 2734 / II / 05.16 / A / Rako Step 4