Transcript
Instructions for the EGO-T kit Assembling your EGO-T:
To assemble the EGO-T, you need the battery, an atomizer and a tank cartridge. First, screw the battery clockwise onto the hole on the atomizer. Gently push the cartridge into the atomizer, forcing the cartridge into the atomizer may cause damage, so please do not force cartridge.
Using the EGO-T:
The EGO-T works by pressing the LED button and inhaling at the same time. Release the button after inhaling. When you press the LED button the indicator light should turn on. By pressing the button too long may cause the unit to overheat and damage the EGO-T.
Battery:
Please always fully charge the battery before using, to maintain a good battery life. To ensure you have a longer battery life; do not store battery in a hot or humid environment. Do not drop the battery; do not force battery onto the unit. Also keep battery from sharp objects.
Liquids:
To prevent excess liquid from building up in the mouthpiece, clean the overflow prevention cap and vapor pathway frequently to prevent blockage. Clean Excess liquids from around the refill hole before using. If you get excess liquids onto your lips, wipe area immediately or wash with water. Please do not drink liquids. Use only as directed. Please keep liquids in a safe place and away from children or pets. Do not store in a hot place or in direct sunlight. Do not store in
a cold place to prevent freezing. Improper use of storage will cause e-liquid to spoil or lose flavor.
Atomizer: If the atomizer overheats, wait until it returns to a normal temperature before using. If the heating element in the atomizer is dry, it will produce a burning taste. Please be ensure that there is enough liquid filled to the mark inside of the tank to prevent the heating element from drying. Charging: The Ego-T uses a 3.7v 900mah rechargeable battery, with a power saving safety function, which allows you to turn the battery on and off. This will prevent accidental discharge of the battery when it’s not in use. Press the button 5 times to turn the battery on/off. The button will flash when the battery turns on/off. To avoid damage to your battery or Ego-T, under normal conditions, it will take about 5 hours to fully charge your battery. Your Ego-t battery is equipped with a microchip to prevent overcharging or your battery which will automatically shut off your battery when fully charged, so it doesn’t burn up or damage the battery. To charge your battery simple screw the battery onto the USB charging cord, that USB cord should be able to plug onto the wall adapter, or a USB port on a computer. The light on the USB should be red indicating the battery is charging. When finished the light on the USB cord should turn green indicating the battery is fully charged. When plugging into a computer to recharge, you should use only the dedicated USB charger provided to you to avoid damage. Use the high voltage USB port to charge your battery properly. Please ensure you fully charge your battery to ensure you maintain a longer battery life. Refilling liquid: Open the top of the cap on top of the tank, drip liquid from your e-liquid bottle into the cartridge until it is full. Then follow instructions on how to assemble your Ego-T.
Caution:
The Ego-T can be damaged if dropped on any hard surfaces. To protect the metal end of the battery, please be sure the battery does not come into contact with any other metal objects inside of pockets or purses.
