Transcript
INTEGREX acdc1121
A high output, mains on-board dimmable DMX driven, linear LED wallwash luminaire providing even wash up to 10 metres. Delivering 1700lm & 4900lm per metre. IP20/IP65 1
C SPG206 July 2015
2
INTEGREX
acdclighting.com/LED/INTEGREX
CONTENTS
3
Product overview
05
Application images
07
Detailed product performance
09
Product drawings and images
11
Specification codes
13
Installation instructions
15
Specification sheet
17
Contact details
18
4
INTEGREX
acdclighting.com/LED/INTEGREX
OVERVIEW A high output, mains on-board dimmable DMX driven, linear LED wallwash luminaire providing even wash up to 10 metres. Delivering 1700lm & 4900lm per metre. IP20/IP65 Provides an even, continuous and powerful light output with excellent colour rendering Available in 3 lengths: 400mm, 800mm, 1200mm Fittings can be installed end to end for a continuous wallwash effect Integral, fully dimmable DMX driver unique to acdc with simple on site addressing via magnetic sensor Architectural grade aluminium extrusion High efficiency LEDs tested to LM80 standards, 50,000hrs lifetime with lumen maintenance at L70 All LEDs are within a 2 step MacAdam ellipse to ensure colour consistency A range of optics is available to suit every application: 12°, 18°, 30°, 50°, 45° x 10° Choice of finishes: RAL special. Extremely durable anodised aluminium silver, anodised aluminium black. For especially demanding environments use hard anodised silver, hard anodised black, chlorine anodised silver, chlorine anodised black Suitable for use in ambient temperatures ranging from -20ºC to 50ºC
IP20 5
IP65 6
INTEGREX
acdclighting.com/LED/INTEGREX
APPLICATION IMAGES
FC200 Building, London, England. Lighting Design: Cundall Light4. acdc LED products: INTEGREX (acdc1121) & PLAZA (acdc1185)
7
8
INTEGREX
acdclighting.com/LED/INTEGREX
PRODUCT PERFORMANCE INTEGREX Standard Bright
INTEGREX Standard Bright
LED Type LED Quantity Drive Current Power Consumption. Including 85% Efficient Driver PFC Colour Temp Initial Colour Accuracy Colour Stability Over Life. Measured at 6000hrs CRI Initial Lamp Lumen Output Initial Lamp Lumens per Circuit Watt Lamp Lumen Output including Thermal & Optical Losses Lamp Lumens (Including Thermal & Optical Losses) per Circuit Watt Luminaire Lumen Output Luminaire Lumens per Circuit Watt (lm/W) Lifetime L70. Based on TM-21 Lumen Depreciation LIF Cat/Codes for % depreciation at 10,000hrs
2700ºK
85 873 78.85 786 70.96 668 60.34
Cree 4 700mA 11W Driver dependant (typical 0.9) 3000ºK 4200ºK 2 Step MacAdam Ellipse 2 Step MacAdam Ellipse 85 80 882 926 79.67 83.69 794 834 71.71 75.32 675 709 60.98 64.05 >50,000 hours Cat1/Code9
6000ºK
80 1032 93.25 929 83.92 790 71.36
Based on standard bright, 400mm, 45x10R optics
Based on 3000ºK, standard A DC t 11 AAB EBbright 30 45 10 400mm N D 40 45x10R IP65 XP G2optics I t
INTEGREX Extra Bright
INTEGREX Extra Bright
LED Type LED Quantity Drive Current Power Consumption. Including 85% Efficient Driver PFC Colour Temp Initial Colour Accuracy Colour Stability Over Life. Measured at 6000hrs CRI Initial Lamp Lumen Output Initial Lamp Lumens per Circuit Watt Lamp Lumen Output including Thermal & Optical Losses Lamp Lumens (Including Thermal & Optical Losses) per Circuit Watt Luminaire Lumen Output Luminaire Lumens per Circuit Watt (lm/W) Lifetime L70. Based on TM-21 Lumen Depreciation LIF Cat/Codes for % depreciation at 10,000hrs
2700ºK
85 2620 90.03 2358 81.03 1942 66.74
Cree 12 700mA 29W Driver dependant (Typical 0.9) 3000ºK 4200ºK 2 Step MacAdam Ellipse 2 Step MacAdam Ellipse 85 80 2647 2779 90.96 95.51 2382 2501 81.87 85.96 1962 2060 67.42 70.79 >50,000 hours Cat1/Code9
Based on extra bright, 400mm, 45x10R optics
6000ºK
80 3098 106.45 2788 95.80 2296 78.90
Based on 3000ºK, extra bright, 400mm, 45x10R optics
LUX-TSI All acdc products are independently tested in line with LM80 standards, 50,000 hours lifetime with lumen maintenance at L70 to guarantee product performance.
To download photometric files please visit www.acdclighting.co.uk/led/INTEGREX
Output data figures stated are typical values.
9
10
INTEGREX
acdclighting.com/LED/INTEGREX
PRODUCT DRAWINGS & IMAGES INTEGREX
INTEGREX bracket
5mmØ
100mm
20mm
52mm
38.5mm Mounting bracket
53mm 100mm
INTEGREX lengths
408mm, 808mm or 1208mm
11
12
INTEGREX
acdclighting.com/LED/INTEGREX
SPECIFICATION CODES Order Code Finishes Powder coat RAL
Chlorine Anodised Silver
Hard Anodised Silver
Anodised Aluminium Silver
Chlorine Anodised Black
Hard Anodised Black
Anodised Aluminium Black
LED colour 2700°K 3000°K 4200°K 6000°K
RED
GREEN
BLUE
AMBER
RGB
Optics
12º
18º
30º
50º
45ºx10º
Length 400mm
800mm
1200mm
IP rating
IP20
IP65
INTEGREX, anodised aluminium black, extra bright 33mm pitch, 4200ºK, 50º, dimmable, 1200mm, IP65 Finishes Painted Coat RAL Anodised Aluminium Silver Anodised Aluminium Black Hard Anodised Silver* Hard Anodised Black* Chlorine Anodised Silver* Chlorine Anodised Black* Output STD bright 100mm pitch Extra bright 33mm pitch LED Colour 2700ºK 3000ºK 4200ºK 6000ºK Red Green Blue Amber RGB Optics 12º 18º 30º 50º 45ºx10º Dimming Dimmable Non-Dimmable Fitting Length 400mm** 800mm 1200mm IP Rating IP20 IP65
acdc1121 /AAB / EB/42/50R/DIM/1200/IP65
RAL AAS AAB HAS HAB CAS CAB
SB EB
27 30 42 60 R G B A RGB
12R 18R 30R 50R 45x10R
DIM NON-DIM
400 800 1200
IP20 IP65
*Upon request. Minimum order quantity applies. **N/A for RGB or Dimmable To order start leads, extension leads and interconnecting, please discuss your requirements with our sales team.
13
14
INTEGREX
acdclighting.com/LED/INTEGREX
INSTALLATION INSTRUCTIONS 4
B
Max 10 x 1.2m
Integrex
A A
A max
B min
150mm
100mm
150mm
150mm acdc1771 - Dim only
B
acdc1760 acdc1760/10m acdc1760/50m
240v
• Only to be installed by a qualified electrician • Installation must be carried out in accordance with local regulations • Turn off mains power to the driver during installation and any subsequent dis-connecting or re-connecting at the fitting • Use correct polarity when wiring. If in any doubt contact the installation helpline +44 (0) 845 862 6400 • Do not cover the luminaires or drivers with thermal insulation or vapour barrier (see air space guidance) • acdc luminaires are designed for lighting applications and must not be used for any other purpose
1
5
Wire Connection
Brown 240v +
Blue 240V -
Green/Yellow Earth
Shield N/A
White N/A
Black N/A
Non - Dimmable
Max 10 x 1200mm IGLu
240v
38mm
Switched DMX
2
Live
Earth
Neutral
DMX +
DMX-
Brown Brown
Green Green
Blue Blue
DMX Shield
White
Black
Silver
Starter Lead acdc1760 acdc1760/10m acdc1760/50m
3
Wire Connection
Brown 240v +
Integrex
Blue 240v -
Link Lead acdc1761 (650mm) acdc1762 (1050mm) acdc1763 (2650mm) acdc1764 (3050mm) Link lead provides 200mm per fitting plus length of link lead. For acdc1761 the total spacing is 200+200+650=1050
Green/Yellow Earth
Shield DMX Drain
White DMX +
Integrex Fitting supplied as standard with input and output leads and connectors 50mm longer than fitting to enable seemless connection
End Cap
Dimmable
Black DMX -
Max 10 x 1200mm IGLu
DMX 240v
Starter Lead acdc1760 acdc1760/10m acdc1760/50m
15
Integrex
Link Lead acdc1761 (650mm) acdc1762 (1050mm) acdc1763 (2650mm) acdc1764 (3050mm) Link lead provides 200mm per fitting plus length of link lead. For acdc1761 the total spacing is 200+200+650=1050
Integrex Fitting supplied as standard with input and output leads and connectors 50mm longer than fitting to enable seemless connection
End Cap acdc1771
16
acdclighting.com/LED/INTEGREX
Specification sheet
INTEGREX® acdc1121
A high output, mains on-board dimmable DMX driven, linear LED wallwash luminaire providing even wash up to 10 metres. Delivering 1700lm & 4900lm per metre. IP20/IP65 INTEGREX
End
Bracket
Lengths 20mm
5mm
100mm 52mm
38 5mm Mounting bracket
53mm 100mm
408mm, 808mm or 1208mm
N.B. These products require clear airflow to maintain the LED junction temperature and lifetime of the product. Please refer to the installation instructions for necessary volumetric air details.
Luminaire
Performance
Material: Robust luminaire made from custom-made aluminium extrusion. Finish: RAL special*. Extremely durable anodised aluminium silver, anodised aluminium black. For especially demanding environments use hard anodised silver*, hard anodised black*, chlorine anodised silver*, chlorine anodised black*. Format: Available in standard or extra bright formats. Lengths: Available in 3 lengths (including end caps) 408mm, 808mm, 1208mm. Beam angles: 12°, 18°, 30°, 50°, 45° x 10° Accessories: Start lead, extension leads, interconnecting leads. Installation: Single combined power and data cable for simple installation Run: Fittings can be installed end to end for a continuous wallwash effect. Temperature range: From -20ºC to 50ºC Thermal protection: Manufactured from bespoke grade aluminium extrusion for optimal heat management. *Upon request. Minimum order quantity applies.
Lumen Maintenance: High efficiency LEDs tested to LM80 standards, 50,000hrs lifetime with lumen maintenance at L70. Initial lamp Lumen output*: Standard bright 882lm, Extra bright 2647lm Lamp lumens inc thermal and optical losses*: Standard bright 794lm, Extra bright 2382lm Luminaire Lumens output*: Standard bright 675lm, Extra bright 1962lm Power consumption (inc 85% efficient driver): Standard bright 11W, Extra bright 29W Efficacy (Lm/W)*: Standard bright 60.98, extra bright 67.42 LED Pitch: Standard bright 100mm, extra bright 33mm, RGB 33mm CRI: >80 Binning: Colour consistency ensured across a project - 2 step MacAdam ellipse. LED Colour: 2700°K, 3000°K, 4200°K, 6000°K, R, G, B, A, RGB Driver: DMX, None Listings: CE, ETL us/c IP rating: IP20, IP65 Warranty: 5 years Weight: 5.4kg per metre *Based on 3000ºK, 400mm, 45x10R optics
Specification Codes Product
Finishes
Output
LED Colour
Optics
Dimming
IP Rating
Length
Painted Coat RAL
RAL
Standard bright
SB
2700ºK
27
12º
12R
Dimmable
DIM
400mm
400
IP20
IP20
Anodised Aluminium Silver
AAS
Extra bright
EB
3000ºK
30
18º
18R
Non-Dimmable
800mm
800
IP65
IP65
Anodised Aluminium Black
4200ºK
42
30º
30R
NonDIM
1200mm
1200
AAB
6000ºK
60
50º
50R
R
R
G
G
acdc1121
Hard Anodised Silver
HAS
Hard Anodised Black
HAB
Chlorine Anodised Silver
CAS
Choline anodised Black
CAB
B
B
A
A
RGB
RGB
45ºx10º 45x10R
acdc1121
This acdc product is • Dual binned within a 2 step MacAdam ellipse to guarantee colour consistency • Supplied with a 5 year guarantee
IP20
IP65 Specification subject to change without notice. Refer to our website for the most recent product documentation.
acdclighting.com |
[email protected] | UK: +44 (0) 845 862 6400 | USA: +1 (410) 220 0088 | Dubai: +971 (0)4 3617365 C SPG206 July 2015
INTEGREX
acdclighting.com/LED/INTEGREX
CONTACT Head Office Wordsworth House Vantage Court, Riverside Way Barrowford Lancashire UK BB9 6BP
Tel: +44 (0) 845 862 6400 Fax: +44 (0) 845 862 6401 Email:
[email protected]
Manufacturing Innovation Works Gisburn Road Barrowford Lancashire UK BB9 8NB
Tel: +44 (0) 845 862 6400
London Studio Ground Floor Central Block Green Mews Bevenden Street London N1 6AS
Sales Tel: +44 (0) 845 862 6400 Deliveries Tel: +44 (0) 845 862 6458 Email:
[email protected]
Dubai Office Office 405, Goldcrest Executive Tower Cluster C - Jumeirah Lakes Towers (JLT) P.O. Box 643811 Dubai United Arab Emirates
Tel: +971 (0) 4 3617365 Email:
[email protected]
USA Office acdc corp, 841 E Fort Ave, #276 Baltimore, MD 21230 USA
Tel: +1 (410) 220 0088 Email:
[email protected]
Global Distribution Network We have an established and growing global network of over 60 distributors and consider them a vital extension to our British, Dubai and North American based export teams. This ensures that all customers receive the same outstanding level of world-class service and knowledge regardless of the location of your project. For contact details of our distribution partners, please visit acdclighting.com/contact/distribution-network/ or contact
[email protected] Specification subject to change without notice. Refer to our website for the most recent product documentation.
18
19
