Transcript
Intelligent Personnel and Asset Tracking Solutions
Our Solution.. Data presented online, optimized per device
Beacons and devices present their location to detector nodes
SMS alerts sent to registered numbers
Detectors can be hardwire connected or configured to work with a standalone WiFi mesh network connected to central Controller to push data into Cloud
Data can be integrated into any third party platform or call centre for managed services
Iknaia In Healthcare • Between 10% and 20% of a typical hospital’s mobile assets are lost or stolen during their useful life (Source : AMR Research) • Track and monitor patients, nurses and doctors • Monitor cleaning activity throughout the hospital • Automate the discharge process • Track assets moving from ambulance to ambulance
• Iknaia Tracking installed in 12 Operating Theatres • Tracking Assets and recording their location • Partnered with NHS supplier Medstrom
Iknaia In Tunnels and Mines • GPS doesn’t work underground! • Achieve BS6164 compliance – traditional Tally system not acceptable • Iknaia Beacons will streamline ‘check-in’ worker process • Know where valuable tools and equipment are in “real time” • Improve health and safety
London Power Tunnels - Wandsworth Existing Safety Systems – Key Concerns Workers • Workers wear 2 brass Tallys on their belt clip and on entering into the tunnel one tally is put on the board in the tally hut – this ensures that the Tally Man knows who is down in the tunnel at any time • This system is not able to show where exactly in the tunnel the worker is at any time only that they have entered and left and what exit they come out of Assets • Currently no asset tagging takes place and often essential equipment goes missing
The Iknaia installation was mapped onto the current site map so as to produce a graphic display of actively and the “beacons” installed
Iknaia Beacons • Iknaia offers a selection of beacons that can : • Made to measure! • Announce their location to a detector or mobile application • Monitor temperature and heat • Monitor heartrate • Monitor UV Rays • Report humidity • Signal if ‘man down’ – using Gyroscope beacons • Measure acceleration and movement in the body using an accelerometer module • Battery level check in place All Beacons report their data to the Iknaia Detector Nodes
Iknaia Detector Nodes IKTCN01—IKNAIA TRACKING CONTROLLER NODE ABS/Polycarbonate Enclosure—Screw Lid—Indoor Use 1.2 GHz ARM Cortext A53 Processor 1 GB RAM Bluetooth 4.1 Class 1 Module (Long Range) 3G GSM Modem RJ45 Ethernet Connector 1 x 0dBi Quad-band GSM Enclosure Mounted Antenna External 11-27V Power Supply Input (Mains adapter included) Iknaia Tracking Software with Cloud Storage
Optional Extras: IKOP101 IP65-Rated ABS/PC Enclosure Upgrade IKOP201 4G/LTE Modem Upgrade w/ext antenna IKOP221 Wi-Fi Mesh Network Controller Module IKOP231 RS485 Long-Distance Comms Module IKOP232 Powerline Comms Module
IKTDN01— IKNAIA TRACKING DETECTOR NODE v.1 LONG RANGE ABS/Polycarbonate Enclosure—Screw Lid—Indoor Use 1.2 GHz ARM Cortext A53 Processor 1 GB RAM 8Gb Local Flash Storage Bluetooth 4.1 Class 1 Module (Long Range) RJ45 Ethernet Connector 1 x 0dBi Quad-band GSM Enclosure Mounted Antenna External 11-27V Power Supply Input (Mains adapter included) Onboard Iknaia Tracking Software
Detector Node Options IKOP010 IP65-Rated ABS/PC Enclosure Upgrade IKOP221 Wi-Fi Mesh Network Controller Module IKOP222 Wi-Fi Network Adapter IKOP231 RS485 Long-Distance Comms Module IKOP232 Powerline Comms Module
IKTDN02—IKNAIA TRACKING BASIC DETECTOR NODE v.1 SHORT RANGE Round Plastic Enclosure D140mm x H28mm—Wall Mount Indoor Use 1.2 GHz ARM Cortext A53 Processor 1 GB RAM 8 Gb Local Flash Storage Bluetooth 4.1 Class 1 Module (Short Range) RJ45 Ethernet Connector 1 x 0dBi Quad-band GSM Enclosure Mounted Antenna External 11-27V Power Supply Input (Mains adapter included) Onboard Iknaia Tracking Software
Optional Extras: IKOP223 Bluetooth Class 1 (Long Range) Upgrade
On Site Wellbeing Monitoring • Workers wear Iknaia wristbands which contain the following Bluetooth low energy sensors: • Temperature – to monitor workers body temperature and environmental heart • Pulse – to monitor heartrate • UV – to monitor UV exposure
• Iknaia wristbands will be used to effectively ‘check-in’ and ‘check-out’ workers on site
• Data collected and integrated into the employee database • Data is cross referenced flagging up any anomalies (ie increase in workers heartrate, increase in body temperature • Detector nodes are ‘two-way’ and can also send out a signal to the wristbands to alert the workers of hazards
Iknaia In Smart Offices • London real estate at an all time high • Office space typically underutilised by 50% • Understand how frequently desks and office space is utilised • Check in and locate guests
Connected Network.. • Track ANY Bluetooth enabled device • Incl. Two-way radios (Motorola, Hytera)
• Wi-Fi Mesh offers multiple channel hotpot • Two-Way communication hubs • Push out known hazards to construction workers • View patient notes
Team Experience Julia McNally – McNally, Founder, Commercial and Sales Lead. Previously worked on ground breaking mobile projects with EMI, Universal Music, Vodafone UK, Orange UK, TMobile and Sprint Wireless. Involved in some early trials using Bluetooth to track and monitor footfall in stores such as Asda and Poundland. Experience in mobile coverage solutions, DAS, Picocells. Working with clients such as Costain, Colas, Amey and Tata Steel.
Matthew Poole, Connector of Objects, Systems Architect, Director of Technology our technical lead, a highly experienced application designer and systems architect who started his career at Civil Aviation Authority as an Air Traffic Engineer, specialist in Raspberry Pi, Parallax, Arduino, GPIO. Author of Building a Home Security System with Raspberry Pi (Pakt Publishing)
Corbin Adler, User Experience and Interface Development has over 20 years in the design industry, experienced in web and mobile interface design, working on projects for clients such as EDF Energy, RBS, Casio, EMI, KYOCERA Document Solutions. In recent years he has focused his design expertise within the transport industry and the unique usability challenges that are often presented in the development of new systems and products. Rhys Tabor, Front End and Middleware developer, responsible for creating Iknaia Airscan dashboard and Iknaia Tracking. Working with clients on a daily basis to add on further functionality at client’s requests. R&D innovation on new technology, from testing to implementation.
Current Clients
New Products
ViBus
Airscan by Iknaia
http://airscan.iknaia.co.uk/login.html
• Reduces Traffic Congestion • Reports journey times for short & long distance • Uses a combination of Bluetooth and WiFi to directly and accurately measure vehicle and pedestrian journey times • Data is presented on a web management console optimised for any device for ease of viewing • Units powered by any power source and/or battery or solar power • Journey times can be pushed onto any interface for delivery on portable screens • Compatible with Iknaia worker ‘Check-in’ using Bluetooth beacon technology
DIVERSION journey delay 10 mins
ViBus - Wearable Devices to improve travel for blind and deaf bus passengers • UK Innovation Transport Systems Catapult Competition – All Aboard • 17-year-old science student, Daria Buszta, from Nottingham won after impressing an expert panel of judges, headed by Transport Minister Baroness Kramer. • Students aged between 14-18 invited to come up with innovative solutions to make buses more accessible for people with visual or hearing impairments • Buszta’s “ViBus” design involves Bluetooth-enabled wristbands that can be handed out by bus drivers, and which vibrate when a passenger approaches his or her stop.
• UKMM/Mobile Onboard chosen to build prototype
