Preview only show first 10 pages with watermark. For full document please download

Intellitect 360™ Integral Luminaire

   EMBED


Share

Transcript

DIGINET CONTROL SYSTEMS DATA SHEET Intellitect 360™ Integral Luminaire High Definition 360 degreee PIR Sensor www.diginet.net.au www.diginet.net.au Range Sensor installed in luminaire Simply “Push” dome to reveal sensor controls DGEMS360PFIX – PIR Occupancy Sensor only, high definition, 360 degree, recessed, in luminaire mounted (control module ordered separately) DGEMSCM1FIX – Control module only for in-luminaire mount PIR Occupancy Sensor, one channel 2A relay output (sensor head ordered separately) DGEMSCM2FIX – Control module only for in-luminaire mount PIR Occupancy Sensor, two channel relay output, 2A per channel (sensor head ordered separately) Overview A compact, low profile 360˚ passive infrared (PIR) sensor head with separate relay output module designed for in-luminaire mounting. The sensor head includes a detection lens which senses both Minor and Major Movement (as defined by NEMA Standard WD 7 - 2011 for Occupancy Motion Sensors). Movement is detected via a sensor array with 864 fields of view (FOV), ensuring reliable operation to a distance of 7m diameter. The device also includes a light sensor for detecting ambient light levels. Adjustment sliders for time-out and light level are discreetly hidden in the patented sensor head which pops out providing easy configuration after installation, without any tools. The separate slim-line one channel and two channel control modules for switching the luminaire have been design specifically for wiring inside a luminaire. Features Typical Applications Designed specifically for in-luminaire (separately available product for in-ceiling mounting) Adjustment controls ease to read and set without a tool Integrated light level detector to inhibit relay switch-on if there is sufficient natural light available Unobtrusive, 60mm diameter, flush-mount design Hidden yet easily accessible sensor head adjustment controls for time-out and light level adjustment High sensitivity 360˚ detection array designed for both minor and major movement applications Two alternative control modules, one channel or two channel, both with volt-free outputs IDC terminals for quick and easy factory termination Manual OFF override input for using during presentations, etc The sensor is suitable for a range of medium and short range indoor applications. For example Cellular offices Corridors Open plan offices Classrooms Meeting rooms Toilets Data Sheet DGEMS360PFIX - Edition 01 Subject to change without notice. 2A switching per relay output, including for fluorescent lighting loads Pre-terminated lead on sensor head for quick and easy connection to control module Latest updates available at www.diginet.net.au 1 of 4 pages Intellitect 360™ Integral Luminaire High Definition 360 degree PIR Sensor DGEMSCM1FIX (1 channel output model) Specifications Electrical Input voltage (Relay module) 220 – 240Vac Input current (Relay module) 2mA (Relay OFF) 11mA (Relay ON) Frequency 50/60Hz Output rated current (control/power module) 2A (500VA) Output voltage (sensor head) 12Vdc nominal Output current (sensor head) 8mA nominal under normal detection with a single sensor. Isolation ≥3.75kVac (Mains/Sensor Head) / SELV Remote override A maximum of 10 remote switches can be connected with up to 20m of cable on the same circuit. Start-up time 45 seconds initialisation (5 minutes for full sensitivity) Optical fields of view (FOV) Mechanical Environmental DGEMSCM2FIX (2 channel output model) 2mA (Relay OFF) 20mA (Relays ON) Long range fields 384 Mid range fields 288 Short range fields 64 Look down fields 40 Sensor head cable Factory fitted – 0.45m Maximum custom – 1.0m Mains supply terminals (including override) IDC / push in connectors Conductor strip length 7.5—8.5mm Ingress protection IP20 Material Flame retardant polycarbonate Weight 178g Ceiling cut-out 54mm diameter Dimensions Refer to diagrams Start-up time 45 sec initialisation (5 mins for full sensitivity) Ambient operating temperature -10°C to +45°C Ambient storage temperature -10°C to +60°C Humidity 10% – 95% RH, non-condensing Intellitect 360™ Sensor Integral Luminaire Relay Output Module ( Single and two chanel modules are the same size ) Data Sheet DGEMS360PFIX - Edition 01 Subject to change without notice. 192g Latest updates available at www.diginet.net.au 2 of 4 pages Intellitect 360™ Integral Luminaire High Definition 360 degree PIR Sensor Sensor Detection Range Major-Motion Detection Range1 7.0m Minor-Motion Detection Range1 3.5m 2.7m Detection Coverage at 2.7m mounting height 0.0m 5 4 7 6 1 3 2 1 0 1 2 3 4 5 FloorSensors Major-Motion As defined by NEMA Standard WD 7 - 2011 for Occupancy Motion Detection Range: 7.0m 5 4 3 7 2 Field of view intersecting with floor. Top view at 2.7m mounting height Floor Major-Motion Detection Range: 7.0m 6 1 5 0 4 1 3 2 2 3 1 4 0 5 1 6 Radius (m) 2 7 3 7 6 5 4 3 2 1 0 1 2 3 4 5 6 7 4 3 2 1 0 1 2 3 4 5 6 7 4 5 6 Radius (m) 7 7 6 5 7 6 Minor-Motion Detection Range: 3.5m Desk Minor-Motion Detection Range: 3.5m Desk Field of view intersecting with desk (0.8m high). Top view at 2.7m mounting height 5 4 3 7 2 6 1 5 0 4 1 3 2 2 3 1 4 0 5 1 6 Radius (m) 2 7 3 7 6 5 4 3 2 1 0 1 2 3 4 5 6 7 4 5 6 7 Radius (m) 7 DGEMS360PFIX 6 5 4 3 -2Edition 1 001 1 Data Sheet 2Subject 3 4to change 5 6 without 7 notice. Latest updates available at www.diginet.net.au 3 of 4 pages Intellitect 360™ Integral Luminaire High Definition 360 degree PIR Sensor Dimensions Typical Electrical Connections Sensor 1 Channel Control Module 46mm Switched Active 55mm 46mm R1 Neutral Active - any phase and/or circuit A/L Active N Neutral Override switch connections See separate diagram for connection options S2 Ø 60mm Load 1 S1 Loop 2 Relay Output Module Loop 1 173mm 45mm 2 Channel Control Module Switched Active 30mm R1 Neutral Active - any phase and/or circuit A/L Active N Neutral Override switch connections See separate diagram for connection options S2 S1 Load 2 Neutral Switched Active Active - any phase and/or circuit Loop 2 Loop 1 Relay Output Module with terminal areas for making electrical connections shown open. Load 1 Override Switch Options S2 S2 S1 S1 Dry Contact Active (same circuit as A/L) Approvals & Compliance IP20 CONTACT INFORMATION Internet: www.diginet.net.au General Enquiries: 1300 95 DALI (3254) Technical Services: 1300 95 3244 Fax: 1300 95 3257 PRODUCT OF DIGINET CONTROL SYSTEMS PTY LTD sales @ diginet.net.au support@ diginet.net.au ABN 89 095 788 864 96-112 Gow Street Padstow NSW 2211 Australia TRUSTED AUSTRALIAN DESIGN ™ A MEMBER OF THE GERARD LIGHTING GROUP The product includes a FIVE-YEAR WARRANTY against manufacturing defects. Full warranty terms can be found here at www.diginet.net.au COPYRIGHT. This document is copyright to Diginet Control Systems Pty Ltd. Except as permitted under relevant law, no part of this user and installation guide may be reproduced by any process without written permission of and acknowledgment to Diginet. DISCLAIMER. Diginet Control Systems Pty Ltd (Diginet) reserves the right to alter the specifications, designs or other features of any items and to discontinue any items at any time without notice and without liability. While every effort is made to ensure that all information in this user and installation guide is correct, no warranty of accuracy is given and Diginet shall not be liable for any error. TRADEMARKS. The identified trademarks and copyrights are the property of Diginet Control Systems Pty Ltd unless otherwise noted. Data Sheet DGEMS360PFIX - Edition 01 Subject to change without notice. Latest updates available at www.diginet.net.au 4 of 4 pages