Transcript
DATA Product
Data sheet no DS0304060 EN 2011 • R1-1
Interface video and signal cable Snooper
Article no 0304060 Orlaco Products - PO Box 193 - 3770 AD Barneveld - The Netherlands Phone: +31 (0) 342 404 555 - Fax: +31 (0) 342 404 556 - E-mail:
[email protected] - Internet: www.orlaco.com
Technical Specifications Interface video- and signal cable Snooper
Article number 0304060 Application Suitable for navigation systems to enable automatic switching to Rear View Camera when using reversing lights.. Operating temperature -40°C to +85°C. Protection IP 67 according to IEC 60529. Included Coaxial cable 75 Ohm mini 3 mm; 4 p. female connector, gold; Jack plug 3,5mm Stereo 3p. Weight 0,05kg. Note
If you want to add more than one camera please contact ORLACO or your local dealer. If you want to connect a rear view camera please use a mirror camera. Article number 0304060 is the interface video- and signal cable, other images in this data sheet must be ordered separately.
Installation Art. no 0304060 Interface video- and signal cable Snooper
Connector 4p female Solder side Female connector 3 4
2
1
1 = Coax core 2 = Coax screen 3 = Red 4 = White
0,40mm2 red wire 0,40mm2 white wire
(Video signal) (Video ground) (12V/DC) (0V)
Jack plug 3,5mm stereo 3p
4p female connector gold
Coaxial cable 75 Ohm mini 3mm
Utilisation of the cable in a system Display Navigation Jack plug
Art. no 0304060 Interface video- and signal cable Snooper for navigation system. Connect to Video 1 (Yellow) White -12V Red +12V
Camera Rear view
All data subject to change without notice. All dimensions are for commercial purpose only. The camera/display systems from Orlaco comply with the latest CE, ADR, EMC and mirror-directive regulations. All products are manufactured in accordance with the ISO 9001 quality management system, ISO 14001 environmental management systems and all Ex products with the IECEx scheme and ATEX directives.
www.orlaco.com
