Preview only show first 10 pages with watermark. For full document please download

Interlogix Sm 200 Data Sheet

   EMBED


Share

Transcript

Fire Alarm Accessories Smoke! in a Can® Aerosol Spray for Functional Testing of Smoke Detectors Overview Standard Features NFPA 72, Table 7.2.2, states that “detectors shall be tested in place to ensure smoke entry into the sensing chamber and an alarm response.” Smoke! in a Can® lets you meet this requirement without contaminating the detector, without affecting its sensitivity, and without increasing the risk of false alarms. • Meets NFPA functional test requirements • Does not contaminate detector • Evaporates completely • Non-toxic formula with no CFCs • MSDS sheet on back of easy-to-peel-off label Patented formula evaporates completely Smoke! in a Can is UL listed for all brands and models of photoelectric or ionization type smoke detectors. Its safe, non toxic formula contains no CFCs. After verifying smoke entry into the detector, you can walk away assured that Smoke! in a Can will evaporate completely, eliminating the build up of left over contaminants found in other smoke test formulas. Page 1 of 2 interlogix.com • Optional tube available to snap on can slows down aerosol and ensures can is held proper distance away from smoke detector FX85001-0602 D ATA S H E E T Not to be used for installation purposes. Issue 2 Warnings & Cautions Extremely Flammable. Contents under pressure. Potential health effects: • Inhalation: High vapor concentration may cause drowsiness and irritation. • Eyes & Skin: Irritation. Prolonged or repeated exposure may cause drying, cracking or irritation. Handling & Storage Store in a cool, dry area. Aerosol cans must be maintained below 120°F to prevent cans from exploding. Note: always hold the can 2 feet from smoke detector and spray 2-3 short bursts of aerosol at the detector to create a cloud of particles around detector. A constant spray of the aerosol too close will blow the spray through detector potentially not causing detector to not alarm. Properties Physical State Specific Gravity Apperance & Odor Boiling Point Vapor Density (air=1) Solubility Liquid .81 Colorless liquid alcohol odor 172°F (initial) 1.6 (est.) Appreciable in H2O Note: MSDS sheet on back of easy to peel off Smoke! in a Can label North America T 885-286-8889 Asia T 852-2907-8108 F 852-2142-5063 Australia T 61-3-9239-1200 F 61-3-9239-1299 Ordering Information Model Number SM200 -12PKG SM-EXT1 Description Smoke! in a Can aerosol spray for functional testing of smoke detectors, case of 12 cans Extension tube snaps on Smoke! in a Can to slow down aerosol spray puffs helping to create a cloud of particles around detector Europe T 32-2-725-11-20 F 32-2-721-40-47 Latin America T 561-998-6100 F 561-994-6572 interlogix.com Specifications subject to change without notice. © 2012 Interlogix. All rights reserved. FX85001-0602 D ATA S H E E T Not to be used for installation purposes. Issue 2 05-31-12 Page 2 of 2