Transcript
INSTALLATION INSTRUCTIONS
INW-AM80
In-Wall Box for AM80
NORTH AMERICA
3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700 Fax: 1.800.832.4888 Other Locations Phone: (001).714.632.7100 Fax: (001).714.632.1044
EUROPE
Unit 3, The Moorings Business Park Channel Way, Longford Conventry, CV6 6RH, Phone: +44 (0) 2476 644105 Fax: +44 (0) 2476 644165
9533-020-021-00
INW-AM80
Contents Weight Limit............................................................................................................................................................... 2 Warning Statements.................................................................................................................................................. 2 Installation Tools........................................................................................................................................................ 3 Parts List................................................................................................................................................................... 3 Features.................................................................................................................................................................... 4 Mount Location.......................................................................................................................................................... 5 Wall Cut-Out.............................................................................................................................................................. 5 Attaching the INW-AM80........................................................................................................................................... 6 Side Cover Installation.............................................................................................................................................. 7 AM80 Back plate Installation..................................................................................................................................... 7 Installing the Cable Bushings.................................................................................................................................... 7 Rubber Bumper Installation....................................................................................................................................... 7 Technical Specifications............................................................................................................................................ 8 Warranty.................................................................................................................................................................... 9
Weight Limit Maximum Weight:
THIS PRODUCT IS NOT INTENDED TO SUPPORT THE WEIGHT OF ANY PRODUCTS OTHER THAN THE NECESSARY CONNECTIONS FOR WHICH IT WAS DESIGNED.
Warning Statements PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS MUST BE READ AND COMPLETELY UNDERSTOOD. KEEP THESE INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE REFERENCE.
THE WALL STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST A MINIMUM WEIGHT OF 100 LBS. IF NOT, THE WALL MUST BE REINFORCED. PROPER INSTALLATION PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN, AS OUTLINED IN THE INSTALLATION INSTRUCTIONS, MUST BE ADHERED TO. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY, OR EVEN DEATH. PROPER INSTALLATION PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN MUST BE FOLLOWED, AS OUTLINED IN THESE INSTALLATION INSTRUCTIONS. FAILURE TO DO SO COULD RESULT IN PROPERTY DAMAGE, SERIOUS PERSONAL INJURY, OR EVEN DEATH. SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE ASSEMBLY OF THIS PRODUCT. USE PROPER SAFETY EQUIPMENT AND TOOLS FOR THE ASSEMBLY PROCEDURE TO PREVENT PERSONAL INJURY. PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED ATTACHMENTS OR MODIFICATIONS, AND IS NOT RESPONSIBLE FOR ANY DAMAGES, CLAIMS, DEMANDS, SUITS, ACTIONS OR CAUSES OF ACTION OF WHATEVER KIND RESULTING FROM, ARISING OUT OF OR IN ANY MANNER RELATING TO ANY SUCH USE, ATTACHMENTS OR MODIFICATIONS. If mounting to wall studs or ceiling joists, make sure that the mounting screws are anchored into the center of the wall studs or ceiling joists. Use of an edge-to-edge stud finder is recommended. Be aware of the mounting environment. If drilling and/or cutting into the mounting surface, always make sure that there are no electrical wires in wall. Cutting or drilling into an electrical line may cause serious personal injury. Make sure there are no water or natural gas lines inside the wall where the mount is to be located. Cutting or drilling into a water or gas line may cause severe property damage or personal injury. This product is intended for indoor use only. Use of this product outdoors could lead to product failure and/or serious personal injury.
Contact Premier Mounts with any questions: 1-800-368-9700
[email protected]
Page 2
Visit the Premier Mounts website at http://www.mounts.com
Installation Instructions
INW-AM80
Installation Tools The following tools may be required, depending on your particular installation. These tools are not provided by Premier Mounts, but you can purchase them at your local hardware store.
Electronic Stud Finder
Pencil
Level
Drywall Saw
Protective Eyewear
Hand Held Drill
⅛˝ Wood Drill Bit
Phillips Head Screwdriver
Parts List Your Premier Mounts product is shipped with all proper installation hardware and components. Make sure that none of these parts are missing and/or damaged before beginning the installation. If there are parts missing and/or damaged, please stop the installation and contact Premier Mounts at 1-800-368-9700. In-Wall Box Hardware
#14 x 1-1/4 Wood Screws (Qty 12)
Cover Plates (Qty 1)
Wood Shims (Qty 14)
In-Wall Box (Qty 1)
1½˝ Cable Bushing (Qty 2)
Protective Rubber Bumpers (Qty 4)
Locking Washers (Qty 4)
Installation Instructions
6-32 x½" Pan head Screw (Qty 4)
Visit Premier Mounts website at http://www.mounts.com
1/4-20 x 1 Pan Phillips (Qty 4)
Page 3
INW-AM80
Features
Precise and Snug Wood shims help to center the in-wall box, as well as contribute to a solid fit.
Spacious and Strong Plenty of room to route cables and cords, as well as store any excess cord length to prevent strain.
Cable & Power Knockouts Multiple knockouts allow you to run power and signal connections through the wall for a clean, concealed look.
Page 4
Visit the Premier Mounts website at http://www.mounts.com
Installation Instructions
INW-AM80
Mount Location Always make certain the area behind the mounting surface is free of electrical wires, cables, and pipes before cutting, drilling, or installing the mounting screws.
is strongly recommended that a licensed electrician • Itsupply wire and power to the in-wall mounting box.
14.00” (355.6mm) Wood Studs
Prior to installing the INW-AM80 please complete all wiring and allow for the appropriate amount of slack. Where you intend to mount the flat panel.
where the location of the mount/display will • Determine be. 18.2” (462.28mm)
While installing the INW-AM80, you will possibly come in contact with electrical wires, plumbing, and insulation. Take the necessary precautions before proceeding with this installation. Proceed to Wall Cut Out Section
Wall Cut Out Line
Wall Cut-Out 1. Use a stud finder (commercially available) to locate the wood studs that will be used for the installation. 2. Use a pencil and lightly mark the location of each stud (Figure 1) 3. Center and level the INW-AM80 between the marked studs. 4. Using the dimensions above,14”(W) x 18.2”(H), draw a pencil line completely around the housing. 5. Cut the drywall on the outside edge of the line and remove the drywall. Make sure that the cut is flush and even with the vertical wall stud (Figure 2).
Proceed to Attaching the INW-AM80 Section
Installation Instructions
(Figure 1) (Figure 2)
Visit Premier Mounts website at http://www.mounts.com
Page 5
INW-AM80
Attaching the INW-AM80 Step 1
(Figure 3)
All existing wires must be moved and anchored to either side of the mounting area (attach in a corner where the wood stud and the rear wall surface connect). 1. Place the INW-AM80 in the opening Is your box fitting snug and center to the studs? If no, proceed to the next step (Step 2) If yes, proceed to step 3 in this “Attaching the INW-AM80” section.
Step 2 Optional Wood Shim Addition: 1. Place six (6) 1/4” wood shims on each side of the INW-AM80 (between the INW-AM80 and the wood stud). The wood shims must be placed between the wood stud and the INW-AM80. Please refer to Figure 4 for correct placement of the wood shims. Use as required. The purpose of the wood shims is to help center the unit, as well as provide a tight fit when all the wood screws are tightened down. Use as many shims as it take to ensure the box is level and centered. (Figure 4) Step 3 1. Drill a ¼˝ pilot hole in each of the ten (10) mounting points. 2. Insert the six (6) #14 x 1-1/4” wood screws (3 on each side) into the mounting points furthest to the rear of the box (Figure 5). 3. Once all of the desired wood shims are in place, tighten down the screws. Do not over tighten these screws.
(Figure 5) Page 6
Visit the Premier Mounts website at http://www.mounts.com
Installation Instructions
INW-AM80
Side Cover Installation
Step 1 When attaching the side covers, make sure that the 1/4” wood shims are in line with the side cover mounting holes. If the wood shims split, don’t panic. These wood shims have been designed to split in half to cover more area. 1. To attach the side covers, use four (4) #14 x 1-1/4” wood screws. 2. Line up the mounting holes on the side covers with the mounting holes that are located in the INW-AM80 box. These should be the two holes closest to the front of the box. 3. Once the mounting holes are located, insert two (2) #14 x 1-1/4” wood screws on each side. 4. Tighten each screw, but do not over tighten hardware.
AM80 Back plate Installation 1. Use the three (3) 1/4-20 x 1 Phillips head screw and three (3) lock washers to attach the AM80 back plate to the INW-AM80. 2. Tighten using a phillips head screw driver. 3. Refer to the instruction manual included with your AM80 mount for full mount installation. Proceed to AM80 protective rubber bumper installation below.
Cable Bushing Installation
If you will be routing the audio, video, and/or data connections through the wall, remove the 1½˝ knockout (located on the top and bottom of the in-wall box). The 1½˝ knockout is easily removed by pressing hard with your thumbs on either side of the knockout, then twisting the knockout until it comes free. Watch for sharp edges!
1½˝ Knockout for Audio / Video / Data Connections
1. Install the cable bushings gently pressing them into the knockout holes. Proceed with installing your flat panel mount.
Rubber Bumper Installation The protective rubber bumpers included with your INW-AM80 are used to protect the wall from any damage or scuffs when moving the flat-panel in and out of the in-wall box. 1. Insert one protective bumper on the top and bottom of each AM80 universal mounting arm, by sliding the open side onto the rear side of each bracket.
Installation Instructions
Visit Premier Mounts website at http://www.mounts.com
Page 7
INW-AM80
Technical Specifications
15.88 403 13.76 350
17.88 454
19.88 17.85 505 453
C L 13.76 350
4.02 102 3.96 101
Ø1.15 29
Ø .27 7 (12 PLS)
14.00 356
2.20 56
18.14 461 Ø .90 23
3.30 84
.06 1 Page 8
Visit the Premier Mounts website at http://www.mounts.com
Installation Instructions
INW-AM80
Warranty PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this product. The limited warranty is valid only for the original purchaser of the product. What Premier Mounts Will Do At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective. If Premier Mounts chooses to replace a defective product or part, a replacement product or part will be shipped to you at no charge, but you must pay any labor costs. What is Not Covered; Limitations PREMIER MOUNTS DISCLAIMS ANY LIABILITY FOR DAMAGE TO MOUNTS, ADAPTERS, DISPLAYS, PROJECTORS, OTHER PROPERTY, OR PERSONAL INJURY RESULTING, IN WHOLE OR IN PART, FROM IMPROPER INSTALLATION, MODIFICATION, USE OR MISUSE OF ITS PRODUCTS. PREMIER MOUNTS DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. PREMIER MOUNTS IS NOT RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO, INABILITY TO USE ITS PRODUCTS OR LABOR COSTS FOR REMOVING AND REPLACING DEFECTIVE PRODUCTS OR PARTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. What Customers Must Do for Limited Warranty Service If you discover a problem that you think may be covered by the warranty you MUST REPORT it in writing to the address below within thirty (30) days. Proof of purchase (an original sales receipt) from the original consumer purchaser must accompany all warranty claims. Warranty claims must also include a description of the problem, the purchaser’s name, address, and telephone number. General inquiries can be addressed to Premier Mounts Customer Service at 1-800-368-9700. Warranty claims will not be accepted over the phone or by fax.
Premier Mounts Attn: Warranty Claim 3130 East Miraloma Ave. Anaheim, CA 92806
How State Law Applies THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
Disclaimer Premier Mounts intends to make this manual accurate and complete. However, Premier Mounts makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Premier Mounts makes no representation of warranty, expressed or implied, regarding the information contained herein. Premier Mounts assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
©Premier Mounts 2011
Installation Instructions
Visit Premier Mounts website at http://www.mounts.com
Page 9
