Transcript
I SERIES Point Source 800
IP8-0002/66 HIGH POWER MID-HIGH FREQUENCY 60° x 60° INSTALLATION LOUDSPEAKER
FEATURES • Matching ketone polymer MF and HF diaphragms provide unmatched uniform sound quality • M200HP MF compression driver for signature Community intelligibility and articulation • HF driver's non-metallic diaphragm and high-flux neodymium motor with demodulation ring significantly reduce harsh HF break-up modes and distortion 19.80" (503mm)
• Innovative low profile modular bracket systems create elegant arrays with simplified installation
TECHNICAL SPECIFICATIONS1
APPLICATIONS MAIN PA (Small to Medium Size Venues) Houses of Worship · Auditoriums · Restaurants Meeting Rooms · Theaters · Corporate A/V Systems
Operating Mode
Passive or Biamp with DSP
Operating Environment
Indoor or Weather-Resistant Outdoor
Operating Range2
387 Hz to 20.6 kHz
Nominal Beamwidth (H x V)
60° x 60°, rotatable waveguide
Transducers
MF - M200HP, 2” exit, ketone polymer diaphragm, compression driver HF – 1 x 1.4" (36mm) exit neodymium compression driver, 2.6" (66mm) voice coil, demodulation ring, ketone polymer diaphragm
Continuous Power Handling3 @ Nominal Impedance
Passive MF HF
47V 35V 32V
Passive MF HF
@ 1W 107 dB 107 dB 107 dB
@ 2.83V 107 dB 107 dB 107 dB
Passive MF HF
Peak 137 dB 135 dB 134 dB
Continuous 131 dB 129 dB 128 dB
System
@ 1W 108 dB
@ 2.83V 108 dB
System
Peak 138 dB
Continuous 132 dB
Passive MF HF
275W - 550W @ 8 ohms, (47V - 66V) 150W - 300W @ 8 ohms, (35V - 49V) 125W - 250W @ 8 ohms (32V - 45V)
DISTRIBUTED OR FILL (Larger Size Venues) Arenas · Stadiums · Night Clubs · Theaters Themed Entertainment · Larger Houses of Worship
Nominal Sensitivity4
DESCRIPTION
Nominal Maximum SPL 5 (Whole Space)
I SERIES Point Source 800 loudspeakers provide exemplary acoustic performance, modular flexibility and elegant aesthetics for modern performance venues. Designed to support the goals of systems integrators and consultants both acoustically and mechanically, I SERIES includes a wide variety of arrayable, rotatable coverage patterns and a comprehensive selection of modular bracket systems that accelerate system design and system commissioning. FEA-optimized linear suspension, high-flux neodymium motor, and integral demodulation ring ensures precise control and very low distortion at high SPL levels. The matched diaphragms on the compression drivers provide natural, transparent sound quality with unrivaled intelligibility and transient response accuracy that complements any source. Ideal for use as a down-fill loudspeaker in a larger I SERIES system or as part of a low-profile three-way or four-way array with the IP8-1151, IS-115 or IS-118 subwoofers, the rotatable 18-inch (457mm) MF/HF waveguide provides well-defined coverage and a smooth off-axis response. The acoustic 8th order MF/ HF passive crossover produces a smooth, consistent vertical off-axis response free from the polar lobing and power response losses inherent in similar systems. User selectable passive or biamp operating modes further expand performance capabilities.
Equalized Sensitivity6
Equalized Maximum SPL7 Recommended Amplifiers
275W @ 8 ohms (1100W peak) 150W @ 8 ohms (600W peak) 125W @ 8 ohms (500W peak)
PHYSICAL Input Connection
(2) Screw terminal blocks (6-position)
Mounting Points
(15) M10 threaded rigging points
Environmental
Outdoor: IP55W per IEC 60529 , MIL-STD-810G
Weight
63 lbs (28.6 kg) loudspeaker only
Dimensions H x W x D
19.80" x 22.10" x 26.30" (503 x 561 x 668 mm)
Finish
Refer to the Technical Drawing
OPTIONS Accessories (Refer to BalancePoint™ Flyware Accessory Guide for complete listing)
Rigging kits include: BFR22: BalancePoint™ Fly Rails; IVY0002: Vertical Yoke; IAF55: Isometric Array Frame; HAB3-BFR38: Sub/Dual 3-Way Horiz Array; HSB3/VSB3: Multiple Splay Brackets for Horiz/Vert Arrays with/without Sub Behind options; DFS: Downfill Splay Kit; DVS-BFR22: Dual Vert Splay Kit with BalancePoint™ Fly Rails; TPK: Tight Pack Kit; IUB0002WRG: Reinforced 304SS U-Bracket (Grey)
Configure-to-Order (CTO)
Custom color, Custom cable lengths on outdoor version
Community strives to improve its products on a continual basis. Specifications are therefore subject to change without notice.
I SERIES Point Source 800
IP8-0002/66
HIGH POWER MID-HIGH FREQUENCY 60° x 60° INSTALLATION LOUDSPEAKER Off‐Axis (Horizontal) HORIZONTAL OFF-AXIS RESPONSE (dB)10
AXIAL PROCESSED RESPONSE (dB)8 Frequency Response Component/System (Axially Processed) Passive (MF/HF) MF HF
Mag [dB] (0°)
120
120
120
110
110
110
110
100
100
100
100
90
90
90
90
80
80 10
Amplitude (dB)
Amplitude (dB SPL)
120
20
100 100
Frequency (Hz) Frequency (Hz)
1000 1000
10000 10000
80
10
MF/HF
120
110
110
110
100
100
100
100
90
90
90
90
110
80
80 10
20
20°
100 100
Mag [dB] (0°) 0°
120
120
20
10°
100
1000 1000
100
10000
80
80
10
10000
MF
Impedance (Ohms)
HF
Passive (MF/HF)
Mid-HF MF
20
1
1 10
20
1000
100
100
Mag [dB] (10°) 10° 20°
1000
Frequency (Hz)
10000
120
120
110
110
100
100
90
90
80
80 10
10000
30
30
20
10
10
0
0 10
0°
20
Mag [dB] (10°)
10°
20°
100 100
Horizontal
360
20
10000 10000
1000 1000
Mag [dB] (20°)
Mag [dB] (30°)
30°
40°
Mag [dB] (40°)
10000 10000
1000 1000
Frequency (Hz)
Beamwidth (Degrees)
100
20
Mag [dB] (40°)
BEAMWIDTH (Degrees)12
Directivity Index
40
Mag [dB] (30°) 40°
(HF) 8.1 ohms @ 3150 Hz
DIRECTIVITY INDEX (dB)11 40
Mag [dB] (20°) 30°
Frequency (Hz)
(Hz) 6 ohms @ 5000 Hz, Min Impedance: (MF) 10.1 ohms @ Frequency 2240 Hz, (MF/HF)
Mag [dB] (40°)
10000 10000
1000 1000
100 100
Mag [dB] (0°)
HF
10
10
40°
(down) (dB)10 VERTICAL OFF-AXIS Off-Axis DOWNVertical RESPONSE
IMPEDANCE (Ohms) 0002 Component Impedance 100
Mag [dB] (30°)
30°
Frequency (Hz)
Frequency (Hz)
100
Mag [dB] (20°)
VERTICAL OFF-AXIS UP RESPONSE (dB)10
Sys / Component Axial Sensitivity (dB SPL)
120
Mag [dB] (10°)
Off-Axis Vertical (up)
AXIAL SENSITIVITY (dB SPL)9 Passive (MF/HF) MF MF HFHF
80
0°
100
100
1000
Frequency (Hz)
1000
10000
10000
BeamH
Vertical
BeamV
100
10
10 10
20
100
100
Frequency (Hz)
1000 1000
10000 10000
I SERIES Point Source 800
IP8-0002/66
HIGH POWER MID-HIGH FREQUENCY 60° x 60° INSTALLATION LOUDSPEAKER
HORIZONTAL POLAR DATA (30dB Scale, 6dB per major division) 90° left 135°
-6
45°
0° front
180° back
90° left
— 400 Hz — 500 Hz
135°
135°
-6
45°
0° front
180° back
135°
45°
90° left
— 4000 Hz — 5000 Hz — 6300 Hz — 8000 Hz
0° front
180° back
-45°
-135°
-6
135°
45°
— 10000 Hz — 12500 Hz — 16000 Hz
0° front
-45°
-135°
-90° right
-90° right
-6
180° back
-45°
-135°
-45°
-135° -90° right
90° left
— 1600 Hz — 2000 Hz — 2500 Hz — 3150 Hz
— 630 Hz — 800 Hz — 1000 Hz — 1250 Hz
0° front
-90° right 90° left
45°
180° back
-45°
-135°
-6
-90° right
VERTICAL POLAR DATA (30dB Scale, 6dB per major division) 90° up 135°
-6
45°
0° front
180° back
90° up
— 400 Hz — 500 Hz
135°
135°
-6
45°
0° front
180° back
-45°
-135° -90° down
135°
-6
45°
-45° -90° down
90° up
— 4000 Hz — 5000 Hz — 6300 Hz — 8000 Hz
0° front
180° back
-135°
-45°
-135° -90° down
90° up
— 1600 Hz — 2000 Hz — 2500 Hz — 3150 Hz
— 630 Hz — 800 Hz — 1000 Hz — 1250 Hz
0° front
-90° down 90° up
45°
180° back
-45°
-135°
-6
135°
-6
45°
— 10000 Hz — 12500 Hz — 16000 Hz
0° front
180° back
-45°
-135° -90° down
NOTES:
30°
22.10" [561.3]
6
1.38" [35.0]
5
TOP/BOTTOM
1.38" [35.0]
16.52" [419.7]
16.50" [419.1]
26.30" [668.1] 15.30" [388.5]
SIDES
5
*Note: The outdoor model drawing is available at communitypro.com - Input panel and mounting point locations and the unit weight may vary from indoor model (shown).
7
1. SYMBOL INDICATES COG. 2. SYMBOL INDICATES MOUNTING POINT, M10 THREADED HOLE. 3. DRAWING REPRESENTATIVE OF IP8-0002/64, IP8-0002/66, A IP8-0002/94. 4. WEIGHT: LOUDSPEAKER ONLY: 63LBS. (28.6KG)
B
C
FRONT
GRILLE PARTIALLY SHOWN
19.80" [502.8]
9.70" [246.4]
6
REV
4
REVISIONS
DESCRIPTION
1.38" [35.0]
16.74" [425.2]
DATE
CL 9.30" [236.2] TSC
16.52" [419.7] 14.00" [355.6] 1.38" [35.0]
3
BACK
CL
3
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
ALL DIMENSIONS IN in/mm U.O.S.
TSC = THEORETICAL SHARP CORNER
DIMENSIONS ACROSS CENTERLINES TO BE SYMMETRICAL
NONE
IP8-0002-2D
I SERIES IP8-0002
SHEET
1 OF 1
REV
0
COMMUNITY PROFESSIONAL LOUDSPEAKERS 333 E FIFTH ST. CHESTER, PA 19013-4511 USA TEL: (610)876-3400 FAX: (610)874-0190
www.communitypro.com
1
2
1
THIS DRAWING HAS BEEN FURNISHED BY COMMUNITY LIGHT & SOUND, INC. THE INFORMATION AND KNOW-HOW THEREON MAY NOT BE USED NOR THE DRAWING REPRODUCED WITHOUT THE WRITTEN PERMISSION OF COMMUNITY. ALL REPRODUCTIONS WHOLE OR IN PART, INCLUDING VENDOR'S SHOP DRAWINGS SHALL BEAR OR REFER TO THIS STAMP.
SCALE
DWG NO.
DRAWING TITLE
1.38" [35.0] 4.26" [108.1]
17.04" [432.8]
2
*Outdoor Models: Grille: Marine grade aluminum with zinc-rich duallayer powder-coat, featuring NeverWet™ treated acoustically transparent woven black fabric backing. Grey (RAL#7047) Enclosure / Finish: 15mm PolyGlas, Grey, heavily textured industrial-grade exterior-rated coating. Black, White or Custom colors upon request.
TOLERANCES ON ALL DIMENSIONS UNLESS OTHERWISE NOTED TO BE: ANGLES: ±.5° DECIMALS: ±.03" METRIC: ±0.5mm
INPUT
7.06" [179.2]
6.37" [161.8]
17.04" [432.8]
4
Indoor Models: Grille: Powder-coated perforated steel backed with color-matched acoustically transparent woven fabric. Black (RAL#9005) or White (RAL#9003) Enclosure / Finish: Black (RAL#9004) or White (RAL#9003) low gloss, uniformly textured painted 15mm Baltic Birch plywood.
A
B
C
D
E
IP8-0002/66
D
E
7
Shipping Weight 76 lbs (34.5 kg)
Unit Weight 63 lbs (28.6 kg) loudspeaker only
HH x W x D 19.80" x 22.10" x 26.30" (503 x 561 x 668 mm)
TECHNICAL DRAWING / DIMENSIONS / FINISH
I SERIES Point Source 800 HIGH POWER MID-HIGH FREQUENCY 60° x 60° INSTALLATION LOUDSPEAKER
I SERIES Point Source 800
IP8-0002/66 HIGH POWER MID-HIGH FREQUENCY 60° x 60° INSTALLATION LOUDSPEAKER CONNECTION DIAGRAMS
+/– DSP
Passive Input
Amp
HF Crossover
MF
+/–
Passive Thru
Single amp
+/–
HF Amp
HF Input
DSP
+/–
MF Amp
HF MF
MF Input
Biamp
Mid-high Input panel
NOTES 1. PERFORMANCE SPECIFICATIONS All measurements are taken indoor using a time-windowed and processed signal to eliminate room effects, approximating an anechoic environment, a distance of 6.0 m. All acoustic specifications are rounded to the nearest whole number. An external DSP with settings provided by Community Professional Loudspeakers is required to achieve the specified performance; further performance gains can be realized using Community’s dSPEC226 loudspeaker processor with FIR power response optimization. 2. OPERATING RANGE The frequency range in which the on-axis processed response remains within 10dB of the average SPL. 3. CONTINUOUS POWER HANDLING Maximum continuous input voltage (and the equivalent power rating, in watts, at the stated nominal impedance) that the system can withstand, without damage, for a period of 2 hours using an EIA-426-B defined spectrum; with recommended signal processing and protection filters. 4. NOMINAL SENSITIVITY Averaged SPL over the operating range with an input voltage that would produce 1 Watt at the nominal impedance and the averaged SPL over the operating range with a fixed input voltage of 2.83V, respectively; swept sine wave axial measurements with no external processing applied in whole space, except where indicated.
Community Professional Loudspeakers 333 East Fifth Street, Chester, PA 19013-4511 USA Phone (610) 876-3400 • Fax (610) 874-0190 communitypro.com •
[email protected]
5. NOMINAL MAXIMUM SPL Calculated based on nominal / peak power handling, respectively, and nominal sensitivity; exclusive of power compression. 6. EQUALIZED SENSITIVITY The respective SPL levels produced when an EIA-426-B signal is applied to the equalized loudspeaker system at a level which produces a total power of 1 Watt , in sum, to the loudspeaker subsections and also at a level which produces a total voltage, in sum, of 2.83V to the loudspeaker subsections, respectively; each referenced to a distance of 1 meter. 7. EQUALIZED MAXIMUM SPL The SPL produced when an EIA-426-B signal is applied to the equalized loudspeaker system, at a level which drives at least one subsection to its rated continuous input voltage limit, referenced to a distance of 1 meter. The peak SPL represents the 2:1 (6dB) crest factor of the EIA-426-B test signal. 8. AXIAL PROCESSED RESPONSE The on-axis variation in acoustic output level with frequency of the complete loudspeaker system with recommended signal processing applied. 1/6 octave Gaussian smoothing applied. 9. AXIAL SENSITIVITY The on-axis variation in acoustic output level with frequency for a 1 Watt swept sine wave, referenced to 1 meter with no signal processing. 1/6 octave Gaussian smoothing applied.
10. HORIZONTAL / VERTICAL OFF-AXIS RESPONSES The loudspeaker’s magnitude response at various angles off-axis, with recommended signal processing applied in the operating mode which utilizes the largest number of individually amplified pass bands. 1/6 octave Gaussian smoothing applied. 11. DIRECTIVITY INDEX The ratio of the on-axis SPL squared to the mean squared SPL at the same distance for all points within the measurement sphere for each given frequency; expressed in dB. 1/6 octave Gaussian smoothing applied. 12. BEAMWIDTH The angle between the -6dB points in the polar response of the loudspeaker when driven in the operating mode which utilizes the largest number of individually amplified pass bands. 1/6 octave Gaussian smoothing applied. Data presented on this spec sheet represents a selection of the basic performance specifications for the model. These specifications are intended to allow the user to perform a fair, straightforward evaluation and comparison with other loudspeaker spec sheets. For a detailed analysis of this loudspeaker’s performance, please download the GLL file and/or the CLF file from our website: communitypro.com
CAUTION: Installation of loudspeakers should only be performed by trained and qualified personnel. It is strongly recommended that a licensed and certified professional structural engineer approve the mounting design. IP8-0002/66 [02FEB2016]
