Transcript
IPA Saturated Wipes Datasheet
The Optronics pre-saturated wipes contain 99% pure IPA (isopropyl alcohol). The wipe material is made from a high quality, non-abrasive, low lint fabric. They can efficiently remove dust, grease, oil, flux, soils and other contaminants or residues from substrates prior to bonding such as bare optical fibre during a termination or splicing process.
Features ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
High absorbance and liquid retention Strong and tear proof Resistant to vigorous use Safe on plastics Rapid evaporation Zero residue Non-abrasive Low lint fabric Ideal for cleaning bare optical fibre Low lint saturated wipe 99% pure Isopropyl Alcohol Wipe Size: 157mm x 176mm Sachet Size: 63mm x 59mm x 5mm PH: Neutral Evaporation Rate: 1.9 Highly flammable
Ordering Information DESCRIPTION
PART NUMBER
IPA Saturated Wipes 50pcs CLEANWIPES
Further Information ■ ■ ■ ■
Europe ■ ■
+44 870 127 3330
[email protected]
© FibreFab 2015
For additional information please contact your sales representative Downloaded from http://www.fibrefab.com/products/cleaning-solutions/ipa-saturated-wipes/ FibreFab reserves the right to make changes to the product specifications in this datasheet at any time without notice Information in this document is correct as of May 9, 2014
Americas ■ ■
+1 410 242 9026
[email protected]
Middle East & Africa ■ ■
+971 4 443 0168
[email protected]
Asia Pacific ■ ■
+86 755 2561 3694
[email protected]
