Iplugrds Tx 08 Inglese Rev 15

Transcript

INSTALLATION & USE MANUAL IPOD COMPATIBILITY IPLUGRDS TX 4G MINI CLASSIC PHOTO UNIVERSAL Adapter for MP3 5G NANO 1 NANO 2 VIDEO APPLE ® iPod - ITouch - IPhone 6G NANO 3 CLASSIC NEW ATTENTION PAD AVAILABLE ONLY WITH IPOD software PC 1.0.2 7G BATTERY CHARGE NOT STILL SUPPORTED NANO Chromatic ITOUCH IPHONE IPHONE 3G BATTERY CHARGE NOT STILL SUPPORTED and AUX IN rev 15 iPod Ready IPLUGRDS TX is a revolutionary electronic module within its market range. In fact it is able to interface EVERY OEM or aftermarket autoradio with all MP3 versions, APPLE iPods of 4th, 5th, 6th generation, iTouch and IPHONE. Moreover an AUX IN input is available to connect external AUDIO sources, such as DVD player, CD player etc... IPLUGRDS TX is designed to work correctly with old and new IPOD generations; to set the right profile you have to follow carefully the IPOD GENERATION SETUP section . The UNIQUE feature of IPLUGRDS TX is its capacity to send the songs TITLE and all the TEXT information of the system, directly on the radio display! This feature helps us to manage all the operations in a simple way! IPLUGRDS TX is a HIGH TECH FM modulator, in fact the audio quality is REALLY COMPARABLE to an AUDIO CD QUALITY! By selecting FREE mode it will be possible to manage every IPOD from its pad but The RDS data are lost WARNING: DO NOT CONNECT THE IPOD PLAYER IF ITS BATTERY IS FLAT Distributed by: PASER s.r.l. Strada Per Poirino 29 Villanova d'Asti (AT), 14019 Italia Tel. 0039 (0)141 947694 Fax. 0039 (0)141 946000 Business Hours (8.30-12.30 14.30-18.30) www.paser.it [email protected] ATTENTION: PASER ASSURES THE CORRECT WORKING OF THE IPLUGRDS TX WITH THE IPODS AVAILABLE ON THE MARKET AT THE MOMENT OF THE MANUFACTURING OF THE MODULE. WE DECLINE ANY RESPONSABILITY OF BAD OR FAILURE WORKING FOLLOWED BY A SOFTWARE UPGRADING OF THE IPOD. INSTALLATION AND CONNECTIONS The IPLUGRDS TX kit is equipped of an electronic unit (A), an iPod connection harness (B) two wired antenna connectors - DIN ANTENNA (D) and DIN PLUG (C), a POWER plug with JACK AUX IN (E). Power connections: Red = Positive 12 VDC Black = GND Pink = Ignition Positive or REMOTE. Insert the car’s DIN ANTENNA into the module’s DIN PLUG (C). Insert the module’s DIN ANTENNA (D) into the radio’s DIN PLUG. IPLUGRDS TX front view JACK AUX Input Connect to 13-pole PLUG GENERAL INFORMATION If the PLAYER should present unusual handling problems, reset your IPOD. 1. Activate and deactivate the HOLD button. HOLD Button iPod player B E + 12VDC GND Connect to dock plug IGNITION OR RADIO REMOTE 2. First press the MENU’ button and immediately after, keeping the MENU button pressed, press the SELECTION button too and keep both pressed for 6 seconds. Connection cable to iPod IPLUGRDS TX back view AUTORADIO Secondary ANTENNA INPUT DIN PLUG RADIO MENU’ BUTTON D ATTENTION: INSERT THE 13-POLES CONNECTOR CORRECTLY ! OK SELECTION BUTTON C This procedure is described on the original IPOD instructions. NO WARRANTY THIS PRODUCT IS COVERED BY TWO-YEAR GUARANTEE FOR ANY MANUFACTURING TROUBLES. THE WARRANTY IS VALID IF ACCOMPAINED BY THE INVOICE OF PURCHASE ANTENNA ADAPTERS TO CONNECT IPLUGRDS TX TO ANY KIND OF RADIO ARE AVAILABLE BOTH FOR ISO AND FAKRA CONNECTION WITH ONE OR TWO ANTENNAS ATTENTION: ALL CONNECTIONS MUST BE CARRIED OUT BY QUALIFIED TECHNICIANS. USE THIS PRODUCT IN VEHICLES WITH 12 VDC BATTERY HAVING NEGATIVE POLE TO THE GROUND. AVOID TO INTERLACE THE WIRES. LAY DOWN THE WIRES SO THAT THEY DO NOT RISK OF BEING CUT OR STRIPPED Pag 2 The information in this guide are purely for information purposes, therefore, are subject to change without notice. At the time of publication the information is correct and reliable. However Paser can not be held responsible for any consequences resulting from errors or omissions in this manual. Paser reserves the right to improve / change the product or manual without obligation to notify users. Pag 15 ACTIVATION AND TUNING With the radio (or the ignition) switched on, IPLUGRDS TX will turn ON automatically. Now it is possible to connect the devices to the available inputs (IPOD, AUX IN). If we switched OFF the unit with the remote, to restart the system just press one button of the remote or connect the IPOD (with ignition and the radio ON). TROUBLESHOOTING The radio band on default is disturbed. Select an available frequency between those described in the FREQUENCY SELECTION on page 4. When the player is paused, an annoying noise appears on loudspeakers. Separate audio masses excluding the jumper on your IPLUGRDS TX circuit as described in the picture below. AUX IN Tune in to the FM 87.7 band frequency (default ), the title of the song playing will appear on the radio display. Now memorize the radio station to simplify future connections! ATTENTION: BE SURE THAT THE RDS FUNCTION ON THE RADIO IS ACTIVATED! ON OFF 6 5 4 3 2 1 87.7 mHz When the radio is turned off, the player does not switch off. Verify the correct connection of the PINK cable to the positive ignition. By changing the frequency trough AF function, the radio does not tune to the new frequency. Press the key where the station is memorized, some radios have low receptivity to the AF function. The audio has distortion or is too low. Activate the “SOUND CHECK on IPOD”, if the trouble it’s not solved, please download mp3Gain software from Paser web site (www.paser.it) to level audio of the file. For AUX IN profile, adjust the volume from the device. AUDIO QUALITY IPLUGRDS TX is designed to manage the audio files with an audio quality comparable to the CD quality. To obtain this, it is necessary to have high quality AUDIO files. For IPOD, the audio levels with which the IPLUGRDS TX gives the best results, respects the parameters chosen by APPLE, and in this way, perfect audio is obtained by recording your audio CD with iTunes. We suggest however to always SET ON the SOUND CHECK option. For songs of a different origin, the quality is still good, even if a difference of volume can be found between one file and another. In the case of bad quality files, distortion can be found (if the volume of recording was too high), or deep audio (if the volume of recording was too low) . iPod Music Photos Extra Settings Shuffle Songs ATTENTION: For new IPOD 6th generation Paser ensures the possibility to control it directly from the IPOD keypad only if the software version is PC 1.0.2 To verify the software version on your iPod: MENU SETTING INFO Pag 14 Pag 3 iPod > > > > > Volume limit BacklightTimer Audiobooks Compilations Sound Check > > > > On AUDIO QUALITY When using the AUX IN JACK input, audio quality will be regulated directly from the device. FREQUENCY SELECTION On default modulation frequency is fixed on 87.7 Mhz. IPLUGRDS TX has an internal selector which allows you to set up to 4 different frequencies. Use dip-switches 1 and 2 to choose a new frequency Depending on dip-switches different combinations you can set a different frequency as described in TAB 1. AUX IN WORKING MODE: IPLUGRDS TX allows you to connect the audio input trough the JACK 3.5mm supplied with the harness. The AUX IN profile selection must be done with the REMOTE. Anyway each time you disconnect your IPOD, IPLUGRDS automatically select the AUX IN profile. If you want to confirm this selection, you have just to press the SRC remote button within 10 sec. otherwise IPLUGRDS TX will switch off. Input audio levels are compatible with any audio source. If the volume is too low or too high, please adjust it through the connected audio source volume. The available functions on your remote are: AUX IN FUNCTION MODE ON OFF 6 5 4 3 2 1 KEY SHORT SINGLE PRESSURE LONG PRESSURE — — — — — SELECTION SOURCES/OFF << ROOT DIP 1 OFF ON OFF ON TAB 2 ALTERNATIVE FREQUENCY (AF) 88.5 MhZ 88.7 MhZ 88.9 MhZ 87,7 MhZ TAB 1 DIP 2 FREQUENCY OFF 87,7 MhZ OFF 87,9 MhZ ON 88,1 MhZ ON 88,3 MhZ KEY >> RDM KEY II > SRC SPECIAL SETTING It is possible to set your IPLUGRDS TX either according the audio characteristics of compression or the pre-emphasis. Some files could have a high dynamic of audio level amplitude, which may cause clipping especially at very low or very high frequencies, with the result of a low audio quality. In order to avoid this, IPLUGRDS TX includes an audio compressor able to level the audio dynamic. This compressor, if necessary, can be excluded by positioning pin 4 ON (see below). << ROOT >> SRC ON OFF 6 5 4 3 2 1 Pag 4 Pag 13 RDM RANDOM function shuffles the tracks, so you will listen to the songs not in the original order. REPEAT function allows you to repeat the playlist playing. AF function allows you to automatically select the alternative frequency for your IPLUGRDS TX (see page 5). IPOD SEL function allows you to select your IPOD right generation. EXIT, allows you to exit from the menu. SW VERS allows you to identify your IPLUGRDS TX software version. SPECIAL SETTINGS The handling of the pre-emphasis is instead referred to the standard of transmission which the different countries adopt; in Europe, the transmission is at 50uS, in other countries, such as USA it is at 75uS. To set the IPLUGRDS TX at 75uS, place pin 5 ON. ON A long press on the left side-key controls the functions FIRST, ROOT, PLAYLIST, EXIT (from the menu). << ROOT OFF 6 5 4 3 2 1 >> RDM FIRST SRC With some radios, IPLUGRDS TX audio can result imperfect because of the common aerial masses. Therefore it is possible to separate these by excluding the jumper as described below. Once entered in the menu, to scroll the functions just press quickly the key >> (right). To confirm a selection press SRC key. EXIT << ROOT ON >> RDM OFF 6 5 4 3 2 1 PLAYLIST SRC ROOT FIRST << ROOT >> RDM SRC Once selected the function needed, it’s possible to scroll each information and each step will be visualized on the radio display. FIRST function selects the first track of the playlist playing. ROOT function selects the first track of the first playlist. PLAYLIST function allows you to select playlists (group of tracks created by the user) pre-loaded into the IPOD. ATTENTION: BEFORE OPEN IPLUGRDS TX TO CARRY OUT ANY KIND OF CONFIGURATION, PLEASE DISCONNECT ALL HARNESSES AND CONNECTED SOURCES Pag 12 Pag 5 IPOD GENERATION SETUP IPLUGRDS TX is able of handling different IPOD generations such as 4th, 5th, 6th generation, (short form 4G, 5, 6G) iTouch and IPHONE. It’s also available a FREE mode, that allows you to control every IPOD but RDS data are lost. On the last page you can find a table which identifies the IPOD and its generation. To set the correct generation, please use the remote supplied with the equipment. This operation can be done only with the system powered and with the IPOD not inserted to the dock. < << TRACK 2 >> RDM ROOT TRACK 1 SRC or back > ROOT When IPOD source is selected, you can manage different functions, the most common is the track up selection. RDM << SRC ROOT TRACK 1 >> RDM TRACK 2 SRC Press the >> RDM button for a long, the display will visualize the state of the RANDOM function, for example RDM OFF if not activated. << I you keep pressed one of side buttons, you can select specials functions. The right side key controls the functions RANDOM, REPEAT, AF, IPOD GENERATION, EXIT (FROM THE MENU). >> RDM ROOT RDM OFF SRC << ROOT Press quickly the >> RDM button, the display will visualize the state of the REPEAT function, for example RPT OFF if not activated. << >> RDM RDM OFF SRC Once entered in the menu, to scroll these functions just press quickly the button >> (right). To confirm a selection press SRC button . RDM ROOT >> RPT OFF SRC EXIT << Press quickly the >> RDM button, the display will visualize the state of the AF. ROOT >> SW VERS RDM SRC IPOD SEL << >> RDM ROOT AF OFF AF ON SRC RPT OFF Press quickly the >> RDM remote key, the display will visualize the IPOD SEL, the menu we need to make the IPOD selection. << ROOT >> RDM RDM OFF << IPOD SEL ROOT SRC SRC Pag 6 Pag 11 >> RDM IPOD WORKING MODE: IPLUGRDS TX allows you to control your iPod from the remote, it is however possible to select songs and the playlist directly from the IPod's pad. The available functions from the remote are: Now press the II > SRC button to confirm the selection. The display will visualize 6G. << >> RDM ROOT IPOD FUNCTIONS MODE KEY << ROOT SHORT SINGLE PRESSURE LONG PRESSURE BACKWARDS SOURCE PLAYLIST TRACK FIRST ROOT PLAYLIST EXIT By pressing shortly the >> RDM button, the display will visualize the various generations available 4G, 5G, 6G, 7G, TOUCH and IPHONE. << ROOT FORWARDS SOURCE PLAYLIST TRACK RDN OFF RPT OFF AF ON IPOD SEL EXIT KEY PLAY/PAUSE SELECT SOURCES/OFF II > SRC CONFIRMATION PLAYLIST / SOURCES KEY >> RDM << >> RDM 5G SRC When the correct generation is displayed, press the II > SRC button to confirm selection. This operation will allow you to control your IPOD at best. << ROOT >> RDM 6G SRC ROOT 6G SRC >> RDM SRC As soon as you connect your iPod, IPLUGRDS TX will automatically dialogue with the player. LINK IPOD If you were using AUX IN and you want to select the IPOD, please follow the instructions described on page 8. Pag 10 Pag 7 DEVICES SELECTION AND CONTROL IPLUGRDS TX allows you to connect two different audio inputs such as IPOD and AUX , separately or together. Anyway each source is separately managed. IPLUGRDS TX has a priority control on the inputs. The main source is the IPOD, consequently the AUX IN input. In order to select and control the devices, the IPLUGRDS TX is equipped with a REMOTE which carries out all the functions. If you select OFF, the system will turn off after two seconds. if connected the Ipod battery remains in charging until you will switch off the radio or the vehicle. << >> IPLUGRDS RDM ROOT SRC BYE BYE OFF USE OF REMOTE: TYPES OF PRESSURE QUICK SINGLE PRESSURE: A pressure of less than 0.3 second. LONG PRESSURE: A pressure of more than 1 second. MENU The module, once powered, remains OFF until ignition is supplied, with the ignition it switch on and within few seconds the first song available will start playing, according to the priorities described above. When the vehicle or the radio are switched on, the system can be reactivated, at any moment, just by pressing one of the remote buttons. << ROOT SOURCES As already said, the unit plays songs from the connected source according to the priority; it’s possible to choose another connected source. This by pressing for a long the II > SRC button, the radio display will visualize the source in use writing SRC IPOD or SRC AUX IN or OFF (the operation is also confirmed by a beep with a low tone). << ROOT SRC WELCOME IPLUGRDS RDM SRC IPOD Important thing to remember is that if you disconnect your IPOD before switch OFF the IPLUGRDS TX, the unit will display the selection of the AUX IN profile. If you do not press SRC key on the remote within 10 seconds, the system will switch off automatically Now if you press the >> RDM button quickly, you will display the list of the available sources. To choose the function / source you need, all to do is to press the II > SRC button quickly. OFF ROOT >> RDM SCR AUX SRC SRC IPOD << ROOT SRC IPOD RDM >> SRC << >> >> RDM SRC Last function is OFF (IPLUGRDS TX switched off). Pag 8 Pag 9