Transcript
IPS 180 Parcel Scale Revision A1, November 2013 1. Introduction Thank you for purchasing this parcel scale. Please read this guide to become familiar with the operation of this product. Save this guide for future reference. 2. Specifications • Min. Capacity: 500 g / 1.2 lb / 1 lb 4 oz, Max. Capacity: 400 lb / 180 kg • Division: 0.05 kg / 0.1 lb / 2 oz • Weighing Unit: kg, lb, lb:oz • Operation keys: Hold, Unit, On/Off/Tare • Power: A/C adapter; Output 4.5vdc 50ma (included) • 3xAA batteries (not included) • Battery Low Indication: “LO”<3.6V ±0.2V • Auto off Time: Selectable 0-5 Minutes. Default setting is 3 minutes • Auto zero tracking: <4d • Overload Indication: “EEEEE” • Wall mount indicator holder bracket with self adhesive pads and screw holes 3. Basic Operations •
Battery installation and power supply. Install 3xAA batteries into battery compartment at the back of the indicator or you can power on the scale by using an external power supply. Note: Battery and power supply can be used at the same time but if being used simultaneously, the scale will use the power supply as the priority source of power. Using the power supply will not charge rechargeable batteries if fitted.
•
Power on. Place the scale on a hard, flat and level surface. Press On/Off/Tare key to power it on, it will display “88888”, a few seconds later it displays “0.0lb” or “0.00kg” or “0: 0lb oz” and is in the weighing mode.
© Inscale Ltd. 2013
1
•
Unit. You can choose the display weight as kg, lb or lb:oz. When in weighing mode, press Unit key to toggle between the three units of measure.
•
Normal weighing. You can get the weight reading after loading objects on the weighing platform. When the weight reading is stable, the current weight on the display will be automatically frozen. Press Hold key to clear the hold function and reweigh.
•
HOLD function. You can set the HOLD function to manual HOLD and auto HOLD. Short press Hold key to auto HOLD and long press Hold key to change between auto HOLD and manual HOLD. When the display shows “0.0. HOLD 1” this means it is in auto HOLD, and HOLD 2 is manual HOLD. When selected, the mode will become effective and switch back to weighing mode 2 seconds later.
•
TARE function. You can press On/Off/Tare key to tare a weight off the scale.
•
Power off. The scale is set up to automatically power off in 3 minutes when there is no operation on the scale. You can also manually power off the scale by pressing and holding the On/Off/Tare for more than 2 seconds.
4. Auto-off time setup 1) When in the normal weighing mode, press and hold down On/Off/Tare and Unit buttons for 5 seconds until the LCD displays all the symbols. 2) Release On/Off/Tare and Unit buttons, the LCD displays now reads the inner code. Press On/Off/Tare button for more than 2 seconds until “P1:XY” is shown, that means the scale is in auto-off time setup mode. 3) When X flashes, press Unit and On/Off/Tare buttons at the same time to change the flashing digit. For this scale, X is fixed to “0”. Press Unit button to switch the flashed position between X and Y. 4) When Y flashes, press Unit and On/Off/Tare buttons at the same time to change the flashing digit (0-7 selectable; 0=no auto-off function, 1=30s, 2=60s, 3=90s, 4=120s, 5=180s, 6=240s, 7=300s). Default setting is 5. 5) Press On/Off/Tare button to confirm. When the parameter setting is confirmed, then the scale powers off automatically.
© Inscale Ltd. 2013
2
5. Calibration Your scale is factory calibrated. This process enables you to re-perform full calibration if you need to. Before calibrating the scale, you require standard 50kg and 100kg weights. 1) When in normal weighing mode, press and hold down On/Off/Tare and Unit buttons for 5s until the LCD displays all the symbols. 2) Release On/Off/Tare and Unit buttons, the LCD displays the inner code. 3) Move away any weights on the platform and wait till the scale comes steady, then press On/Off/Tare, the LCD displays " 0.0kg", that means the scale will begin to calibrate scale’s zero-point. 4) When the zero-point inner code stays stable and is saved automatically, LCD displays " 50.0kg", that means the scale will be calibrated on the first calibration point. Load the 50kg weight on the platform. 5) When the inner code for 50.0kg is stable and saved automatically, LCD displays " 100.0kg", that means the scale will be calibrated on the second calibration point. Remove the 50kg weight and load the 100kg weight on the platform. 6) When the inner code for 100.0 kg is stable and saved automatically, LCD displays " 150.0kg", that means the scale will be calibrated on the third calibration point. Add the 50kg weight to the 100kg weight already on the platform. 7) When the above procedures are finished, the scale powers off automatically. Inscale Ltd. products are predominantly designed for the Laboratory, Educational, Medical, retail and Industrial Segments. The product range can be described as follows: Analytical and Precision Balances Compact and Portable Balances High Capacity Balances Moisture analysers / balances Mechanical Scales Counting Scales
Digital Weighing/Check-weighing Scales High performance Platform Scales Crane scales Medical / Health Scales Retail Scales for Price computing
For a complete listing of all Inscale products visit our website at www.inscale.co.uk
© Inscale Ltd. 2013
3
Manufacturer’s Declaration of Conformity This product has been manufactured in accordance with the harmonized European standards, following the provisions of the below stated directives: Electro Magnetic Compatibility Directive 2004/108/EC Low Voltage Directive 2006/95/EC RoHS2 Directive 2011/65/EC Inscale Ltd. Maidstone Road Kingston Milton Keynes MK10 0BD, UK The Waste Electrical and Electronic Equipment Directive (WEEE) 2002/95/EC
This symbol indicates that the equipment carrying this mark must NOT be thrown into general waste but should be collected separately and properly recycled under local regulations. Inscale is dedicated to minimizing the impact our products have on the environment and to complying with the WEEE Directive and any amending legislation. At the end of the life of this product, please do not dispose of with unsorted municipal waste but arrange for collection or disposal at a recognised centre so it can be recycled using techniques that reduce waste and do not introduce or release hazardous substances harmful to our health or the environment. Contact us via our website if you need any assistance or advice on correct disposal. © Copyright by Inscale Ltd. All rights reserved. No part of this publication may be reprinted or translated in any form or by any means without the prior permission of Inscale Ltd. Inscale Ltd. reserves the right to make changes to the technology, features, specifications and design of the equipment without notice. All information contained within this publication is to the best of our knowledge timely, complete and accurate when issued. However, we are not responsible for misinterpretations which may result from the reading of this material. The latest version of this publication can be found on our Website: www.inscale.co.uk
© Inscale Ltd. 2013
4
