Transcript
Ipstones T5 IP65 surface mounted range of non-corrosive luminaires
Mains Luminaire
Emergency Luminaire
Ipstones is a range of IP65 non-corrosive luminaires featuring a polycarbonate lens and an ABS base. Ideal for use in industrial areas, agricultural buildings and changing rooms, Ipstones are supplied with high frequency control gear as standard and its steel gear tray is retained on straps for ease of installation. Ipstones are supplied less lamps but include suspension eyes and stainless steel mounting brackets to provide the option to suspend the luminaire if required.
Catalogue Numbers Mains Luminaires
Standard Ipstones luminaire with polycarbonate clips Mains Lumens
Weight
Cat No
Lamp & Mode
IPS28/HF
28W T5 high frequency mains
2600
2.00Kg
IPS228/HF
2 x 28W T5 high frequency mains
5200
2.10Kg
IPS35/HF
35W T5 high frequency mains
3300
2.20Kg
IPS235/HF
2 x 35W T5 high frequency mains
6600
2.30Kg
IPS49/HF
49W T5 high frequency mains
4300
2.20Kg
IPS249/HF
2 x 49W T5 high frequency mains
8600
2.30Kg
IPS54/HF
54W T5 high frequency mains
4450
2.00Kg
IPS254/HF
2 x 54W T5 high frequency mains
8900
2.10Kg
Emergency Luminaires Emergency Weight Lumens
Cat No
Lamp & Mode
IPS28/M3
28W T5 high frequency M3 emergency
650
2.70Kg
IPS228/M3*
2 x 28W T5 high frequency M3 emergency
650
2.80Kg
IPS35/M3
35W T5 high frequency M3 emergency
860
3.00Kg
IPS235/M3*
2 x 35W T5 high frequency M3 emergency
860
3.10Kg
IPS49/M3
49W T5 high frequency M3 emergency
890
3.20Kg
IPS249/M3*
2 x 49W T5 high frequency M3 emergency
890
3.30Kg
* Reverts to 1 lamp in emergency
Options Suffix: /AD /SCL /ST
Intelligent addressable luminaire Stainless steel clip Digital self-test luminaire
Specification Body: Diffuser: Gear-Tray: Charger LED: Lamps:
ABS Polycarbonate diffuser Steel construction retained on straps Constant current with green LED for mains healthy and connected battery 28W, 35W, 49W or 54W T5 fluorescent (not supplied)
Dimensions
B A
C
Luminaire
A (Length)
B (Width)
C (Height)
Clips Required
1 x 28W
1210mm
90mm
80.5mm
10
2 x 28W
1210mm
108mm
85mm
10
1 x 35W
1508.5mm
90mm
80.5mm
12
2 x 35W
1508.5mm
108mm
85mm
12
1 x 49W
1508.5mm
90mm
80.5mm
12
2 x 49W
1508.5mm
108mm
85mm
12
1 x 54W
1210mm
90mm
80.5mm
10
2 x 54W
1210mm
108mm
85mm
10
Technical Information Luminaire data files are available for inclusion into lighting design software packages. Photometric data is available at www.relux.biz and further lighting design information is available from our catalogue or www.orbik.co.uk.
Installation Instructions
•
Connect the mains cable(s), which should be a maximum of 1mm² solid core.
•
The supply for a non-maintained emergency circuit must be unswitched and is connected to the unswitched input.
•
The supply to a non-emergency circuit can be switched and is connected to the switched input.
•
If a single unswitched supply is used for both emergency and normal use a link should be connected between the unswitched supply and switched supply terminals.
•
Mark the battery pack with date of installation and connect the battery to the module.
•
For testing purposes a fused spur or keyswitch should be included in the unswitched supply.
Orbik Limited, Orbik House, Northgate Way, Aldridge, Walsall, West Midlands, WS9 8UZ Tel: 0870 516 8214 • Fax: 0870 516 8591 • Email:
[email protected]
www.orbik.co.uk
