Transcript
Product Datasheet BATTERY CHARGERS
Rugged, reliable and efficient battery chargers for vital generator starter motors BATTERY CHARGERS Your generator is useless if it doesn’t start. Small though it is, the generator’s battery charger is one of its most critical components. It’s the inexpensive and often-ignored widget that makes sure tens of thousands of pounds worth of generating capacity works as specified. IPU’s ComAp and Datakom battery chargers support a wide range of voltages, currents and mountings to suit a variety of applications. All our chargers also include overload and shortcircuit protection to preserve and safeguard the battery. IPU offers you far more than the chargers themselves. We will make sure you get the right charger for you. With decades of experience working with all aspects of gen-sets and powergeneration equipment, IPU’s Engine Control division understands the environments chargers are placed in. We can answer the questions that would baffle box-shifters.
Reliable All our battery chargers from ComAp and Datakom are tried and tested, making them extremely reliable. Rugged Both ComAp and Datakom battery chargers are robust with a rugged design making them ideal for many industrial applications. Efficient Our battery chargers offer high levels of efficiency even at full load, giving you the power you need to kick start emergency generators.
Product Datasheet BATTERY CHARGERS
Battery Charger Product Range ComAp InteliCharger 500 • • • • • • • • • •
Advanced automatic & powerful battery charger Microprocessor controlled Suitable for all battery types High output power 20A Optimized charging system Battery boost charging system (optional) Binary input for boost charging Two binary alarm outputs Two conditions LEDs Provides equalizing level charge
• • • • • • • • • •
Fully automatic operation
• • • • • • • •
Over-voltage protection
• • • • • • • • •
Over-voltage protection
100% continuous operation Cost effective High reliability Naturally cooled – fanless Soft-start circuit, limiting AC surge current Over-voltage protection Reverse battery connection protection Over-temperature protection 24 volt nominal outputs
ComAp InteliCharger 60 12A & 24A • • • • • • • • •
12V/24V advanced automatic battery charger 6A/3A current output High efficiency Cost effective Compact size Sealed electronic construction Robust & high reliability Fully automatic operation Continuously rated
Over-temperature protection Reverse battery connection protection Universal AC input ranges Low ripple output Naturally cooled Voltage adjust potentiometer Charger can be used as a standalone power supply
ComAp InteliCharger 60 12AF & 24AF • • • • • • • • •
12V/24V advanced automatic battery charger 6A/3A current output High efficiency Cost effective Compact size Sealed electronic construction Robust & high reliability Fully automatic operation Continuously rated
Over-temperature protection Reverse battery connection protection Universal AC input ranges Low ripple output Naturally cooled Voltage adjust potentiometer Fail alarm relay output Charger can be used as a standalone power supply.
Product Datasheet BATTERY CHARGERS
Battery Charger Product Range Star Product
ComAp InteliCharger 120 12-24 • • • • • • • • •
24V 5A and 12V 6A nominal output (dual voltage) Adjustable voltage and current output High efficiency Universal AC input range Automatic battery status diagnosis Microprocessor-controlled charging algorithm Four charging stages; Recovery, Bulk, Absorption Float Over-temperature protection
• • • • •
Reverse battery connection protection
• •
Naturally cooled
• • • • • •
Reverse battery connection protection
• •
Naturally cooled
• • • •
Blink code diagnostic LED
Battery under voltage protection Blink code diagnostic LED Fail alarm relay Charger can be used as a standalone power supply IP20 protection
DIN rail mounting
ComAp InteliCharger 120 12 • • • • • • • • •
12 V / 10 A nominal output Adjustable voltage and current output High efficiency Universal AC input range Automatic battery status diagnosis Microprocessor-controlled charging algorithm Four charging stages; Recovery, Bulk, Absorption, Float Over-temperature protection DIN rail mounting
Battery under voltage protection Blink code diagnostic LED Fail alarm relays Mains power input fail signalling Charger can be used as a standalone power supply IP20 protection
ComAp InteliCharger 240 24 • • • • • • • • • •
24 V / 10 A nominal output Adjustable voltage and current output High efficiency ≥ 88% Universal AC input range
Fail alarm relays Mains power input fail signalling
Automatic battery status diagnosis
Charger can be used as a standalone power supply
Microprocessor-controlled charging algorithm
Naturally cooled
• Four charging stages; Recovery, Bulk, Absorption, Float • • Over-temperature protection Reverse battery connection protection Battery under voltage protection
IP20 protection DIN rail mounting
Product Datasheet BATTERY CHARGERS
Battery Charger Product Range Datakom SMPS 124 & 242 • • • • • • •
12V 4A & 24V 2A output DIN rail mounted 100 KHz switchmode architecture Float charging system
• • • •
Wide operating voltage range Short circuit protection Overload protection High temperature protection
Constant voltage output Current limited Rugged design for industrial environments
Datakom SMPS 1210 & 2410 with Display • • • • • • •
12V 10A & 24V 10A output
•
Wide operating voltage range
DIN rail mounted 100 KHz switchmode architecture Float charging system Constant voltage output
• • • • •
Rectifier fail output Boost charge input Short circuit protection Overload protection High temperature protection
Current limited Rugged design for industrial environments
Datakom SMPS 1210 & 2410 without display • • • • • • •
12V 10A & 24V 10A output
•
Wide operating voltage range
DIN rail mounted 100 KHz switchmode architecture Float charging system Constant voltage output Current limited Rugged design for industrial environments
• • • • •
Rectifier fail output Boost charge input Short circuit protection Overload protection High temperature protection
Star Product
Product Datasheet BATTERY CHARGERS
Battery Charger Product Range Datakom SMPS 123 & 243 • • • • • • •
12V 3A & 24V 3A output 100 KHz switchmode architecture Float charging system Constant voltage output Current limited Rugged design for industrial environments
• • • • • •
Rectifier fail output
• • • • • •
Rectifier fail output
Boost charge input Short circuit protection Overload protection High temperature protection Plug-in connection system
Wide operating voltage range
Datakom SMPS 125 & 245 • • • • • • •
12V 5A & 24V 5A output 100 KHz switchmode architecture Float charging system Constant voltage output Current limited Rugged design for industrial environments Wide operating voltage range
Boost charge input Short circuit protection Overload protection High temperature protection Plug-in connection system
Product Datasheet BATTERY CHARGERS
Technical Specifications
ComAp ComAp InteliCharger InteliCharger 60 500 12A & 24A
ComAp ComAp InteliCharger 60 InteliCharger 12AF & 24AF 120 12-24
ComAp InteliCharger 120 12
ComAp InteliCharger 240 24
Output Voltage (V)
24
12 (12-A) / 24 (24-A)
12 (12-AF) / 24 (24-AF)
12 / 24
12
24
Output Current (A)
20
6 (12-A) / 3 (24-A)
6 (12-AF) / 3 (24-AF)
5/6 (dual voltage)
10
10
Input Voltage range (V/AC)
90-132
100-240
100-240
90-305
115-230
90-135
Input Frequency Range (Hertz)
47-63
47-63
47-63
47-63
47-63
47-63
Operating temp. range (°C)
-20/+50
-10/+50
-10/+50
-25/+70
-25/+70
-25/+70
Storage temp. range (°C)
-40/+80
-20/+85
-20/+85
-40/+80
-40/+85
-40/+85
Efficiency at full load (%)
89
89
89
90
89
88
High temp. protection
Yes
Yes
Yes
Yes
Yes
Yes
Short circuit protection
Yes
Yes
Yes
Yes
Yes
Yes
Display Screen
No
No
No
No
No
No
Din Rail Mounted No
No
No
Yes
Yes
Yes
H x W x D (mm)
146 x 231 x 138
112 x 77 x 42
112 x 77 x 42
115 x 47 x 111
114 x 72 x 136
114 x 112 x 136
Weight (g)
3200
400
400
300
650
850
Product Datasheet BATTERY CHARGERS
Technical Specifications
Datakom SMPS 124 & 242
Datakom SMPS Datakom SMPS Datakom SMPS Datakom SMPS 1210 & 2410 with display 1210 & 2410 123 & 243 125 & 245
Output Voltage (V/DC)
13.7 (124) / 27.4 (242)
13.7 (1210) / 27.4 (2410)
13.7 (1210) / 27.4 (2410)
13.7 (123) / 27.4 (243)
13.7 (125) / 27.4 (245)
Output Current (A)
4 (124) / 2 (242)
10
10
3
5
Input Voltage range (V/AC)
170-270
170-270
170-270
170-270
170-270
Input Frequency Range (Hertz)
45-65
45-65
45-65
45-65
45-65
Operating temp. range (°C)
-20/+70
-20/+70
-20/+70
-20/+70
-20/+70
Storage temp. range (°C)
-40/+80
-40/+80
-40/+80
-40/+80
-40/+80
Efficiency at full load (%)
80 (124) / 82 (242)
85 (1210) / 88 (2410)
85 (1210) / 88 (2410)
85 (123) / 86 (243)
85 (125) / 86 (245)
High temp. protection
Yes
Yes
Yes
Yes
Yes
Short circuit protection
Yes
Yes
Yes
Yes
Yes
Display Screen
No
Yes
No
No
No
Din Rail Mounted Yes
No
No
No
No
H x W x D (mm)
87 x 69 x 62
175 x 90 x 82
175 x 90 x 82
112 x 108 x 55
112 x 108 x 55
Weight (g)
200
600 (1210)/ 610 (2410)
600 (1210)/ 610 (2410)
250
250
Forward together 2003/372
IPU Group Engine Control Cygnus Way, West Bromwich, B70 0XB Phone: +44 (0) 121 511 0420 Fax: +44 (0) 121 511 0401
Email:
[email protected]
www.ipu.co.uk
