Iqqsm00

Transcript

IQQSM00 3G/HD/SD-SDI Quad Split Monitor The IQQSM00 provides both SDI and HDMI monitoring outputs for up to four HD-SDI 3 Gbit/s, 1.5 Gbit/s or 270 Mbit/s SD-SDI inputs. Generated in a quad split format at resolutions up to 1920x1080 it enables convenient source monitoring on a single display with the option of feeding the SDI output into a router for remote monitoring applications. With inputs capable of handling a mix of formats and frame rates, the IQQSM00 comes in a space efficient modular package with the added benefit of user definable on-screen captions for easy image identification. Features Order codes SDI RX & Equalization De-interlacer Scaler 2 SDI RX & Equalization De-interlacer Scaler SDI RX & Equalization De-interlacer Scaler 4 SDI RX & Equalization De-interlacer Scaler Adjustable Bi & Tri-level Reference Internal frame Ref A - B 3 SFP 1 SERIAL IN IQQSM0001-2B3, IQQSM0001-2A3 3G/HD/SD-SDI Quad Split Monitor. 4 SDI inputs, 1 SDI output, Up to 2 outputs via SFP, 6 GPIs, reference inputs via IQH3B frame reference*. SFP options: FC1-13T1 - Single 1310nm fiber Tx FC1-13T2 - Dual 1310nm fiber Tx FC1-HDBT2 - HD-BNC Dual Tx FC1-HDMI2 - HDMI Tx with 2m cable FC1-HDMI4 - HDMI Tx with 4m cable Note: SFP type must be ordered in addition to the module. For more details on enclosure types please refer to Frames and Hardware section. *Note: Frame reference only available with -B rear panels and IQH3B frame. HDMI TX Processing & Positioning 3 2 4 Border Generator Caption Insert SDI TX 1 SDI 1 Built-in Intelligence GPI Control 8 IQH3B Chassis Reference Bus inputs  Block Diagram for IQQSM0001-2B3 Network Intelligence, Control & Monitoring O/I 1 SER OUT Outputs Inputs Why should you choose this module? • Enables convenient local monitoring up to four video signals in a quad split view on a single monitor • Duplicate SDI output allows the quad split signal to be routed to other areas for remote monitoring applications GPIO IQQSM00 01-2A • Easy to use, quad-split multi-viewer • Output - Support for HDMI at resolutions up to 1920 x 1080, and SDI • Genlock reference to provide phase aligned output • 32 user definable memories for storing and recalling image identifiers etc. • Standard quad-split display using equal image sizes, with single image zoom function • Controllable borders and image identification via user definable caption, 1 per image • Standards supported: – 3G-HD to SMPTE424M – HD-SDI to SMPTE292M – SD-SDI to SMPTE259M-C • Rear panel connection via micro HDMI interface with adapter cables for standard HDMI connection • RollCall monitoring allows all signal paths to be managed IQQSM00 3G/HD/SD-SDI Quad Split Monitor Technical Specification Inputs and Outputs Signal Inputs SDI Inputs Input Cable Length Specifications Electrical 4x Up to 80m Belden 1694A @ 3 Gbit/s Up to 140m Belden 1694A @ 1.5 Gbit/s Up to 350m Belden 1694A @ 270 Mbit/s Signal Outputs SDI Output x 1 Fiber Signal Output Outputs Optical Connector / Format Conforms to Controls Indicators Power CPU Status Input 1-4 Reference x2 3 GBit/s HD-SDI, 1.485 Gbit/s HD-SDI or 270 Mbit/s SD-SDI LC singlemode SMPTE 297-2006 SMPTE 424M (HD level A/B) SMPTE 292M (HD) SMPTE 259M-C (SD) OK (Green) OK (Green flashing) OK (Green), Warning (Yellow), Error (Red) 3G-OK (Blue), HD-OK (Green), SD-OK (Yellow), Loss (Red) OK (Green – tri-level), OK (Yellow – bi-level), Loss (Red) Video Controls Input 1 - 4 Configuration 1, 2 Input status Logging Optical Logging RollTrack controls RollTrack Sources Other Controls User memories 11/15 Present, Loss, Unknown, Data Rate On/Off, Index, Source, Address, Command, Status, Sending Unused Input 1 - 4 Present Input 1 - 4 Rate Unknown Input 1 - 4 Error Input 1 - 4 Loss Input 1 - 4 3G Input 1 - 4 HD Input 1 - 4 SD Name, save and recall 32 user memories Connector / format Return loss Output jitter Optical Tx Wavelength Spectral width (FWHM) Output power Rise and Fall Time Extinction ratio Link distance 3Gbit/s SDI, SMPTE 424M 1.5Gbit/s HD-SDI, SMPTE 292M 270 Mbit/s SDI, SMPTE 259M-C / DVB-ASI BNC/ 75ohm panel jack on standard SAM connector panel >-15dB (270Mbit/s, 1.5Gbit/s) >-10dB (3Gbit/s) SD-SDI 0.2 UI (10Hz) / 0.2 UI (1KHz) 3G/HD-SDI 1.0 UI (10Hz) / 0.2 UI (100KHz) 1310 nm >1.5 nm (typ) 0 to -5 dBm typical (-2 dBm typical) 135 ps @ 3Gbit/s 270 ps @ 1.5Gbit/s 1.5 ns @ 270Mbit/s >7.5:1 (typ) Up to 30 Km @ 270Mbit/s Up to 21 Km @ 1.5Gbit/s Up to 10 Km @ 3Gbit/s Power Consumption Module Power Consumption (inc. HDMI SFP) 25.5 PR (B Frames) 28 W (A Frames)