Preview only show first 10 pages with watermark. For full document please download

Is-520-e Edge Bracket And Clamp Is_print 1-up Lr

   EMBED

Share

Transcript

Edge Bracket ™ CAUTION: Brackets have sharp edges. Wear gloves and use caution when installing the product. Installation Guide Face of stud Inside stud Self-nailing barbs Small stud bays Use screws or nails to secure bracket to either the front or inside of stud. Bend in both tabs to fit the bracket inside the stud bay. Edge brackets are also offered with self-nailing barbs that can be driven directly into wood studs. If stud bay is not wide enough, tear perforation on the vortex of the bracket to best fit the opening. Edge Clamp ™ 1 2 3 Installation Guide thumb tab pipe opening tooth narrow lower lip wide lower lip wide top lip narrow top lip 4 Install CTS pipe or stub out into pipe hole opening. Position wide top lip over the back edge to hook onto bracket 5 Push thumb tab down and slightly forward to engage both edges of the bracket. Then align tooth with hole in bracket. Install the clamp from the flat side (face) of the bracket. Use thumb and push wide lower lip onto bracket to engage the clamp. 6 Completed installation. #IS-520-E