Transcript
I SERIES Subwoofer 600
IS6-218
MEDIUM POWER DUAL 18-INCH SUBWOOFER
FEATURES • Long excursion ferrite LF drivers with FEA-optimized motors and symmetric movement suspension • Matched-size enclosure and aligned suspension point for seamless flown array integration • 1400W continuous power handling (5600W peak) • High sensitivity design minimizes power compression losses and required amplifier size • Isolated driver air volumes allow use of directional steering techniques within a single enclosure 39.00" (991mm)
TECHNICAL SPECIFICATIONS1 Operating Mode
APPLICATIONS SMALL TO MEDIUM SIZE VENUES Houses of Worship · Auditoriums · Restaurants Meeting Rooms · Theaters · Corporate A/V Systems LARGER SIZE VENUES Arenas · Stadiums · Night Clubs · Theaters Themed Entertainment · Larger Houses of Worship
Single or Dual Amp
Operating Environment
Indoor or Weather-Resistant Outdoor
Operating Range
32 Hz to 145 Hz
2
Transducers
2 x 18" (457mm) double-treated cones with 4" (102mm) inner/outer wound voice coil, ferrite construction
Continuous Power Handling3 @ Nominal Impedance
Single Amp Dual Amp
75V 75V
Nominal Sensitivity4
Half Space Whole Space
@ 1W 107 dB 101 dB
@ 2.83V 110 dB 104 dB
Nominal Maximum SPL 5
Half Space Whole Space
Peak 144 dB 138 dB
Continuous 138 dB 132 dB
Half Space Whole Space
@ 1W 102 dB 96 dB
@ 2.83V 105 dB 99 dB
Half Space Whole Space
Peak 139 dB 133 dB
Continuous 133 dB 127 dB
Single Amp Dual Amp
1400W - 2800W @ 4 ohms, (75V - 106V) 700W - 1400W @ 8 ohms, (75V - 106V) (each driver)
Equalized Sensitivity6
DESCRIPTION I SERIES Subwoofer 600 loudspeakers provide exemplary acoustic performance, modular flexibility and elegant aesthetics for modern performance venues. Designed to support the goals of systems integrators and consultants both acoustically and mechanically, I SERIES Subwoofers provide a broad range of sizes and capabilities that can be specifically matched to the needs of any modern venue. Each cabinet was carefully designed to provide matching heights, face widths and suspension point locations for seamless integration into flown arrays with I SERIES full-range models. The broad range of optional low profile fly rails, fly frames and modular array brackets reduces design and installation time while also providing improved aesthetics and nearly limitless integration possibilities. The IS6-218 is a direct radiating subwoofer with large, balanced ports that provide optimal enclosure tuning and even air pressure distribution to the driver cones, reducing distortion and extending system longevity. Drivers are loaded into individual air volumes within the enclosure, isolating their performance from one another. This arrangement not only provides additional protection to drivers in case of failures, but also allows the designer to implement directional subwoofer techniques, like steered end-fire arrays and cardioid patterns, within a single enclosure when using any I SERIES dual driver subwoofer model.
Equalized Maximum SPL7 Recommended Amplifiers
1400W @ 4 ohms (5600W peak) 700W @ 8 ohms (2800W peak) (each)
PHYSICAL Input Connection
(2) 4 position screw terminal blocks
Mounting Points
(24) M10 threaded rigging points Indoor; (23 in Outdoor model)
Environmental
Outdoor: IP55W per IEC 60529 , MIL-STD-810G
Weight
170 lbs (77.1 kg) subwoofer only
Dimensions H x W x D
39.00" x 22.10" x 28.89 " (991 x 561 x 734 mm)
Finish
Refer to the Technical Drawing
OPTIONS Accessories (Refer to BalancePoint™ Flyware Accessory Guide for complete listing)
Rigging kits include: BFR22: BalancePoint™ Fly Rails; IAF55: Isometric Array Frame; VAB-BFR38: Sub Above Vert. Array; HAB3: Sub/Dual 2-Way Horiz. Array; HVS3: Multiple Horiz./Vert. Array Kits with Sub Behind Array Options; TPK: Tight Pack Kit; IUB1153WRG: Reinforced 304SS U-Bracket (WR/WT models only)
Configure-to-Order (CTO)
Custom color, Custom cable lengths on outdoor version
Community strives to improve its products on a continual basis. Specifications are therefore subject to change without notice.
I SERIES Subwoofer 600
IS6-218
MEDIUM POWER DUAL 18-INCH SUBWOOFER
AXIAL PROCESSED RESPONSE (dB)8
Axial Processed Response, Compensated HALF Space (dB)
120
120
110
110
100
100
90
90
80
80
10
Half Space LF
20
100 100
1000 1000
Frequency (Hz)
10000 10000
AXIAL SENSITIVITY (dB SPL)9
System Axial Sensitivity, HALF Space (dB SPL)
Half Space LF
120
120
110
110
100
100
90
90 80
80
20
10
100 100
Frequency (Hz)
1000 1000
10000 10000
IMPEDANCE (Ohms) 100
100
10
10
1
1 10
LF
20
Impedance
100 100
Min Z 20 Hz ‐ 1000 Hz = 3.2 Ohms @ 40 Hz
Minimum Impedance: 3.2 ohms @ 40 Hz
1000 1000
Frequency (Hz)
10000 10000
FRONT
GRILLE PARTIALLY SHOWN
19.34" [491.4]
39.00" [990.6]
19.50" [495.3]
6
5
1.38" [35.0]
22.10" [561.3]
1.52" [38.6]
CL
REV
4
REVISIONS
DESCRIPTION
17.01" [432.1]
*Note: The outdoor model drawing is available at communitypro.com - Input panel and mounting point locations, and the unit weight will vary from indoor model (shown).
7
TOP/BOTTOM
6.25" [158.7]
DATE
INPUT
7.06" [179.2]
22.53" [572.4] 16.00" [406.4]
CL
36.24" [920.6]
1.52" [38.6]
4
16.87" [428.4]
1.38" [35.0]
SIDES
5
28.89" [733.8]
17.01" [432.1]
NOTES: 1.38" [35.0] 1. SYMBOL INDICATES COG. 2. SYMBOL INDICATES MOUNTING A POINT, M10 THREADED HOLE. 3. WEIGHTS: LOUDSPEAKER ONLY: 157LBS. (71.2KG)
B
C
D
E
6
Indoor Models: Grille: Powder-coated perforated steel backed with color-matched acoustically transparent woven fabric. Black (RAL#9005) or White (RAL#9003) Enclosure / Finish: Black (RAL#9004) or White (RAL#9003) low gloss, uniformly textured painted 15mm Baltic Birch plywood.
1.38" [35.0]
4.26" [108.1]
DIMENSIONS ACROSS CENTERLINES TO BE SYMMETRICAL TSC = THEORETICAL SHARP CORNER
3
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
ALL DIMENSIONS IN in/mm U.O.S.
2
NONE
IS6-218-2D
I SERIES IS6-218
SHEET
1 OF 1
0
REV
www.communitypro.com
COMMUNITY PROFESSIONAL LOUDSPEAKERS 333 E FIFTH ST. CHESTER, PA 19013-4511 USA TEL: (610)876-3400 FAX: (610)874-0190
1
2
1
THIS DRAWING HAS BEEN FURNISHED BY COMMUNITY LIGHT & SOUND, INC. THE INFORMATION AND KNOW-HOW THEREON MAY NOT BE USED NOR THE DRAWING REPRODUCED WITHOUT THE WRITTEN PERMISSION OF COMMUNITY. ALL REPRODUCTIONS WHOLE OR IN PART, INCLUDING VENDOR'S SHOP DRAWINGS SHALL BEAR OR REFER TO THIS STAMP.
SCALE
DWG NO.
DRAWING TITLE
1.38" [35.0]
TOLERANCES ON ALL DIMENSIONS UNLESS OTHERWISE NOTED TO BE: ANGLES: ±.5° DECIMALS: ±.03" METRIC: ±0.5mm
BACK
CL
3
*Outdoor Models: Grille: Marine grade aluminum with zinc-rich duallayer powder-coat, featuring NeverWet™ treated acoustically transparent woven black fabric backing. Grey (RAL#7047) Enclosure / Finish: 15mm PolyGlas, Grey, heavily textured industrial-grade exterior-rated coating. Black, White or Custom colors upon request.
A
B
C
D
E
IS6-218
7
Shipping Weight 190 lbs (86.2 kg)
Unit Weight 170 lbs (77.1 kg) loudspeaker only
HxWxD 39.00" x 22.10" x 28.89 " (991 x 561 x 734 mm)
TECHNICAL DRAWING / DIMENSIONS / FINISH
I SERIES Subwoofer 600 MEDIUM POWER DUAL 18-INCH SUBWOOFER
I SERIES Subwoofer 600
IS6-218 MEDIUM POWER DUAL 18-INCH SUBWOOFER
CONNECTION DIAGRAMS
INPUT PANEL
+/–
LF1 Input
+/– DSP
Amp
External Jumper
LF
LF1 Thru
+/–
LF2 Input
+/–
LF
LF2 Thru
Single amp
+/–
LF1 Input
LF1 Amp
+/–
LF
LF1 Thru
DSP
+/–
LF2 Amp
LF2 Thru
+/–
LF
LF2 Input
Dual amp
NOTES 1. PERFORMANCE SPECIFICATIONS All measurements are taken indoor using a time-windowed and processed to eliminate room effects, approximating an anechoic environment, a distance of 6.0 m. All acoustic specifications are rounded to the nearest whole number. An external DSP with settings provided by Community Professional Loudspeakers is required to achieve the specified performance; further performance gains can be realized using Community’s dSPEC226 loudspeaker processor with FIR power response optimization. 2. OPERATING RANGE The frequency range in which the axial processed response remains within 10dB of the average SPL. 3. CONTINUOUS POWER HANDLING Maximum continuous input voltage (and the equivalent power rating, in watts, at the stated nominal impedance) that the system can withstand, without damage, for a period of 2 hours using an EIA-426-B defined spectrum; with recommended signal processing and protection filters.
Community Professional Loudspeakers 333 East Fifth Street, Chester, PA 19013-4511 USA Phone (610) 876-3400 • Fax (610) 874-0190 communitypro.com •
[email protected]
4. NOMINAL SENSITIVITY Averaged SPL over the operating range with an input voltage that would produce 1 Watt at the nominal impedance and the averaged SPL over the operating range with an input voltage of 2.83 Volts, respectively; swept sine wave axial measurements with no external processing applied in whole space, except where indicated. 5. NOMINAL MAXIMUM SPL Calculated based on nominal / peak power handling, respectively, and nominal sensitivity; exclusive of power compression. 6. EQUALIZED SENSITIVITY The respective SPL levels produced when an EIA-426-B signal is applied to an equalized loudspeaker system at a level which produces a total power of 1 Watt , in sum, to the loudspeaker subsections and at a level which produces a total voltage, in sum, of 2.83 volts to the loudspeaker subsections, respectively; each referenced to a distance of 1 meter. 7. EQUALIZED MAXIMUM SPL The SPL produced when an EIA-426-B signal is applied to an equalized loudspeaker system, at a level which drives at least one subsection to its rated continuous input voltage limit, referenced to a distance of 1 meter. The peak SPL represents the 2:1 (6dB) crest factor of the EIA-426-B test signal.
8. AXIAL PROCESSED RESPONSE The axial magnitude response of the complete loudspeaker system and each pass band capable of being driven by an independent amplification channel with recommended signal processing applied. 1/6 octave smoothing applied. 9. AXIAL SENSITIVITY The SPL plotted against frequency, in all operating modes and for each pass band capable of being driven by an independent amplification channel, for a 1 Watt swept sine wave, referenced to 1 meter with no signal processing. 1/6 octave smoothing applied. Data presented on this spec sheet represents a selection of the basic performance specifications for the model. These specifications are intended to allow the user to perform a fair, straightforward evaluation and comparison with other loudspeaker spec sheets. For a detailed analysis of this loudspeaker’s performance, please download the GLL file and/or the CLF file from our website: communitypro.com.
CAUTION: Installation of loudspeakers should only be performed by trained and qualified personnel. It is strongly recommended that a licensed and certified professional structural engineer approve the mounting design. IS6-218 [02FEB2016]
