Transcript
Version 1.1
ORing Industrial Networking Corp. Serial
Media Converter
ISC Series
Quick Installation Guide Introduction
Industrial Serial Media Converter
Specifications
ISC Series are industrial media converters provide media conversion for RS-232 and RS-422/485 interfaces. ISC Series are ABS housing design and supporting an operating temperature of - 10°C to 70°C . ISC Series (-I Model) Opto-isolations provide 3000 VDC of isolation to protect the host computer loops and destructive voltage spikes. Internal high-speed transient suppressors on each data line protect the modules from dangerous voltages levels or spikes. Therefore, the ISC Series is reliable media converter and can satisfy most demand of operating environment. The ISC-1212-I RS-422/485 repeater boosts the RS-422/485 signals to extend the reach distance up to 4000 ft (1200m) and increase the maximum number of connected nodes up to 128. With a special circuitry, ISC-1212-I is able to automatically detect the data flow and switch the direction of the data lines accordingly. “Auto baud rate detector” enables ISC-1212-I to automatically configure RS-422/485 signals to any baud rate without external switch setting. The ISC-1210U-I/ISC-1310U-I converter is an intelligent, stackable expansion module that connects to PC USB port or USB Hub via the Universal Serial Bus(USB) port, providing one High-Speed RS-232/RS-422 or RS-485 serial port(jumperless). The ISC-1210U-I/ISC-1310U-I feature easy connectivity for serial devices. The RS232 standard supports full-duplex communication and handshaking signals (such as RTS, CTS) and The RS-485 control is completely transparent to the user and software written for half-duplex COM works without any modification. The ISC-1210U-I/ISC1310U-I module derives the power from USB port and doesn’t need any aid of external power adapter.
ORing Media Converter Model
Installation
ISC-1112
ISC-1112-I
ISC-1212-I
ISC-1210U-I
ISC-1310U-I
USB V1.1 port (B-Type)
-
-
-
1
1
DB9 Connector (Female)
1
1
-
-
-
10-pin Terminal Block
1
1
2
1
1
DIN-Rail Install Step
Physical Ports
Baud Rate
300 ~ 115.2 Kbps
Data bit
5, 6, 7, 8
Stop bit
Parity
Po
we
r
ISC
-10
1, 1.5, 2
00
None, Even, Odd, Space, Mark Rx
Flow Control
XON / XOFF (software) Auto Hardware Director Contro for RS-485 Interface RS-232: TxD, RxD, GND
RS-232: -
Tx
XON / XOFF (software) RTS / CTS (Hardware) Auto Hardware Director Contro for RS-485 Interface RS-232: -
RS-232: TX, RX, RTS, CTS, GND
RS-422: TX+, TX-, RX+, RX- RS-422: TX+, TX-, RX+, RX-, GND RTS+, RTS-, CTS+, CTS-, GND
RS-422: TxD+, TxD-, RxD+, RxD-
Signal RS-485: Data+, Data-, GND
Features
LED indicator
Auto switching baud rate from 300 ~ 115200 bps
Powerindicators Indicator LED
Green: Power LED x1
Wide operating temperature range from -10°C to 70°C
TxD Indicator
Green LED x1
Provide 3000 VDC isolation protection by -I model
RxD Indicator
Red LED x1
Automatic internal RS-422/485 bus supervision
Power
Reach distance up to 4000 feet (1200 m) for RS-422/485 interface RS-232/RS-422 support RTS/CTS handshake signals ( -U Model only )
Input power
Auto detect and switching for USB to RS-232/422/485 ( ISC-1310U-I )
Power consumption(Typ.)
Power requirement: +9 to +30 VDC
Protection
ABS with captive mounting hardware design Mounts easily on DIN-rail or panel
0.7 Watts
2.2 Watts
-
Isolation
Wall-mounted Install Step
USB bus power (self power)
+9~30 VDC power inputs in 10-pin terminal block
0.65 Watts
3000 VDC
Drive Support O.S.
Windows 95/98/ME/2000/XP, Linux
Physical Characteristic Enclosure
ABS
Dimension (W x D x H)
71.2 (W) mm x 25.3 (D) mm x 100.6 (H) mm (2.8x1x3.96 inch)
Weight (g)
110 g
112 g
128 g
114 g
110 g
Environmental
ORing Industrial Networking Corp.
Copyright© 2009 ORing All rights reserved.
TEL: +886-2-2918-3036 FAX: +886-2-2918-3084
QIG
ISC Series
Storage Temperature
o
o
-25 to 85 C (-13 to 185 F) o
o
Operating Temperature
-10 to 70 C (14 to 158 F)
Operating Humidity
5% to 95% Non-condensing Po
Regulatory approvals EMI
FCC Part 15, CISPR (EN55022) class A
EMS
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Website: www.oring-networking.com E-mail:
[email protected] Shock
IEC60068-2-27
Free Fall
IEC60068-2-32
Vibration
IEC60068-2-6
Warranty
2 years
we
r
ISC
-10
00
Rx Tx
PRINTED ON RECYCLED PAPER
Quick Installation Guide
Version 1.1
ORing Industrial Networking Corp. Serial
Media Converter
ISC Series
Quick Installation Guide Front Panel
Industrial Serial Media Converter
Pin Assignment
ISC-1112-I / ISC-1112
Packing list
ISC-1112-I / ISC-1112 Pin Assignment Serial Port DB9 Female
RS-232 Serial Port
RS-232
Model name Front Panel
10-pin Terminal Block Pin Assignment RS-422/485 Terminal Block Pin Assignment
RS-232
Model Description
Accessory
I A
Industrial 1-port RS-232 to 1-port RS-422/485 serial media converter with 3KV isolation
ISC-1112
B
Industrial 1-port RS-232 to 1-port RS-422/485 serial media converter
X 1,
2
X 1,
3
X 1,
4
ISC-1210U-I
I C
Industrial 1-port USB to 1-port RS-422/485 serial media converter with 3KV isolation
1
X 1,
2
X 1,
3
X 1,
4
X 1,
5
X 1,
6
X1
D
Industrial 1-port USB to 1-port RS-232/422/485 serial media converter with 3KV isolation
1
X 1,
3
X 1,
4
X1
5
X 1, X 1,
2
ISC-1310U-I
6
X1
ISC-1212-I
I E
Industrial RS-422/485 repeater with 3KV isolation
1
X 1,
2
X 1,
3
X 2,
4
X1
ISC-1112-I
1
X 1,
2
X 1,
3
X 1,
4
X1
1
X1
5 GND 4 3 RxD ISC-1112-I Industrial RS-232 to RS-422/485 Media Converter with Isolation
Power LED Power
2 TxD
Industrial RS-232 to RS-422/485 Media Converter
1
Length 1.2 Km
Resistor (R1) 120 ohm
600 m 300 m
220 ohm 330 ohm
RS-232 Pin-Assignment
RS-422/485 External Termination Resistor
Pin Description 2 TXD 3 5
Rx
RXD GND
Tx LED
Length 1.2 Km
Resistor (R1) 120 ohm
600 m 300 m
220 ohm 330 ohm
Tx
Info
RS-232 Pin-Assignment
3 5
3
4
5
6
7
8
9
10
TX+
TX-
RX+
RX-
N.C.
V+
GND
RXD GND
Tx
RS-422/485 Terminal Block Pin Assignment
DC: +9 ~ 30 VDC
RS-422
Reserved
Connections of Media Converter
10 (B)GND
(R)+Vs
Rx-
Rx+
Tx+
RS-422 Tx-
1
RS-485 Data-
Data+
(R)+Vs
Tx-
Rx-
Tx+
Rx+
RS-422
Data-
RS-485
(B)GND 10
Interface RS-422/485 1
Reserved Power Input
N.C.
2
Data+ Data-
RS-422
ISC-1210U-I Pin Assignment
Pin Description 2 TXD
Rx
DC: +9 ~ 30 VDC
Data+
1
Pin No.
Reserved
Power
RS-422/485 External Termination Resistor
Rx LED
ISC-1112
Interface RS-485
A
Pin No.
B
Info
1
2
TX+/D+ TX-/D-
3
4
5
RX+
RX-
7
6
RTS+ RTS-
9
8
CTS+ CTS-
10
N.C.
ISC-1112-I / ISC-1112 Port Connection
GND
ISC-1310U-I Pin Assignment
RS-422/485 Serial Port
RS-232
RS-232/422/485 Terminal Block Pin Assignment
ISC-1210U-I
ISC-1310U-I
Interface RS-422/485 Pin No.
USB Port
Info USB
1
RS-422 Reserved
TX+/D+ TX-/D-
RS-232
3
4
5
6
7
RX+
RX-
N.C.
TX
RX
2
8 RTS
PLC
9
10
CTS
GND
RS-422/485
USB
ISC-1112-I / ISC-1112
ISC-1212-I Pin Assignment ISC-1210U-I
ISC-1310U-I
Industrial USB to RS-422 /485 Media Converter with Isolation
utput RS-422/485 Terminal Block Pin Assignment
Industrial USB to RS-232/ 422/485 Media Converter with Isolation
Power
Power
RS-422/485 Termination Resistor R1: for D+ / TxD+ & D-/TxDR2: for RxD+ / RxDR3: for CTS+ / CTSR4: for RTS+ / RTS-
R1: for D+ / TxD+ & D-/TxDR2: for RxD+ / RxD-
Length Resistor 1.2 Km 120 ohm 600 m 300 m
Rx
Interface RS-485
RS-422/485 Termination Resistor
220 ohm 330 ohm
Rx
RS-422
ISC-1212-I Port Connection 1.2KM
Reserved
Length Resistor 1.2 Km 120 ohm 600 m 300 m
Tx
Reserved
220 ohm 330 ohm
Pin No. Info
Tx
1
2
Data+ Data-
3
4
5
6
7
8
9
10
N.C.
TX+
TX-
RX+
RX-
N.C.
V+
GND
RS-422/485
D
Pin No. Info
RS-422/485 Serial Port
1.2KM
10
Interface RS-485
F.GND
CTS
RTS
Rx-
TX
1
C
RS-232 RX
Rx+
Tx+/D+
RS-485/RS-422 Tx-/D-
10 CTS-
F.GND
RTS+
RTS-
CTS+
RS-422
Rx+
Tx+/D+
Tx-/D-
RS-485
Rx-
1
Input RS-422/485 Terminal Block Pin Assignment
20
19
Data+ Data-
Reserved
RS-422
18
17
N.C.
TX+
16 TX-
Reserved
15
14
RX+
RX-
13
12
RS-422/485 11
ISC-1112-I
N.C.
RS-232/422/485 Serial Port
1.2KM
Accessory ISC-1212-I
1
Wall-mounted kit
2
DIN-Rail kit (ABS)
RS-422/485 3
10-Pin Terminal block
ISC-1212-I
PLC
ISC-1112-I
11
Tx-
Rx+
1.2KM RS-422/485
Rx-
Data-
RS-485
Tx+
20 Data+
RS-422/485 Serial Input Port
RS-422
ISC-1210U-I / ISC-1310U-I Port Connection ISC-1212-I Industrial RS-422/485 Repeater with Isolation
USB
Power
4
Additional Termination Resistor: R8. R9
QIG
5
CD
6
USB Cable
Length Resistor (R8,R9) 1.2 Km 110 ohm 600 m 300 m
220 ohm 330 ohm
Rx
Tx
(R)+Vs
(B)GND 10
Tx-
Rx+
Rx-
RS-422 Tx+
Data+
RS-485 Data-
1
DC: +9 ~ 30 VDC
PC
E O
ISC Series
PLC
ORing Tools CD Ver 1.0 Ri
ng
www.oring-networking.com
RS-422/485 Serial Output Port
QIG
RS-485
PRINTED ON RECYCLED PAPER
ISC-1210U-I / ISC-1310U-I
Quick Installation Guide
