Transcript
Isco Product Data
Isco Street Level Installation Tool Measuring flow and water quality in sewers is now fast and easy. The Isco Street Level Installation Tool lets you install your monitoring system from ground level, eliminating the costs and hazards of manhole entry. Pole sections can be combined to access pipe as deep as 15 feet. Use the Street Level Installation Tool with the following Isco flow and parameter sensors: ➤ Area Velocity Sensors ➤ Submerged Probes ➤ Bubble Lines ➤ pH Probes ➤ Dissolved Oxygen Probes
Fast and Simple to Use The Street Level Installation Tool consists of a Mounting Ring and a Multi-section Pole. Rings are available to fit inside 6", 8", 10", 12" and 15" diameter pipes. Easy to Install – Attach your sensor to the mounting ring, then slide the ring onto the rod at the base of the pole and lower it into the manhole. Pulling the strap collapses the ring so it can be inserted into the upstream pipe. Once in place, release the strap, allowing tension against the wall of the pipe to hold the ring in place. Remove the pole. Easy to Remove – Pull on the strap to collapse the mounting ring for quick removal.
➤ Temperature Probes Non-Isco probes can be used as well, but may require adapting to fit the mounting rings.
The Isco Street Level Installation Tool saves time and eliminates the hazards of manhole entry.
Isco Street Level Installation Tool Specifications Mounting Rings Available Sizes Strap Length
Multi-section Pole 6", 8", 10", 12" and 15"
17.75 feet
5.4 m
Maximum Manhole Depth (approximate)
15 feet
4.6 m
Type 301 stainless steel, Delrin®, stainless steel hardware, polypropylene strap
Maximum Length
3 feet
0.9 m
Area velocity sensors, submerged probes, bubble lines, pH probes, dissolved oxygen probes, temperature probes
Maximum Weight
6.5 lbs.
2.9 kg
Materials
Anodized aluminum, Type 304 stainless steel, Delrin
18 feet
Compatible Isco Sensors
Maximum Length (assembled)
5.5 m
Weight (12" ring with strap) 6 lbs. Materials
150, 200, 250, 300 and 380 mm
2.7 kg
(disassembled)
All brand or product names are trademarks or registered trademarks of their respective holders.
Ordering Information For a complete Street Level Installation Tool, order: ✓ At least one Multi-section Pole ■ ✓ Mounting Ring(s) and Sensor Carrier(s) for your application(s) ■ NOTE: The Isco area velocity sensor does not require a carrier because it has an integral mounting plate that slips onto the rings.
Description
Part Number
Multi-section Pole (includes instruction manual)
60-3204-012
Mounting Rings (include straps) For 6" (150 mm) Diameter Pipe For 8" (200 mm) Diameter Pipe For 10" (250 mm) Diameter Pipe For 12" (300 mm) Diameter Pipe For 15" (380 mm) Diameter Pipe
60-3204-014 60-3204-015 60-3204-016 60-3204-017 60-3204-018
Sensor Carriers (needed to attach probes to rings) For Submerged Probe Level Sensor For Bubble Line For pH Probe with Built-in Exposed Temperature Probe For pH Probe and Separate Temperature Probe For Dissolved Oxygen and Temperature Probe For Temperature Probe Only
60-3204-005 60-3204-007 60-3204-009 60-3204-004 60-3204-006 60-3204-010
Multi-section Pole
Maximum Length 17.75 ft. (5.4 m)
Monitoring Instrument
;;; @@@ ÀÀÀ @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@ ÀÀÀ ;;; @@@ ÀÀÀ ;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@ ÀÀÀ ;;; @@@@ ÀÀÀÀ ;;;; @@@ ÀÀÀ ;;; @@@ ÀÀÀ ;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@ ÀÀÀ ;;; @@@ ÀÀÀ ;;; @@@@ ÀÀÀÀ ;;;; @@@ ÀÀÀ ;;; @@@@ ÀÀÀÀ ;;;; @@@ ÀÀÀ ;;; @@@@ ÀÀÀÀ ;;;; @@@@@@@ ÀÀÀÀÀÀÀ ;;;;;;; @@@@@@@ ÀÀÀÀÀÀÀ ;;;;;;; Sensor Cable
Strap
Flow
Isco, Inc.
www.isco.com
4700 Superior St. Lincoln, NE 68504 USA Phone: (402) 464-0231 USA & Canada: (800) 228-4373 Fax: (402) 465-3022 E-Mail:
[email protected]
Isco is continually improving its products and reserves the right to change specifications without notice. ©2003 Isco, Inc. • Printed in U.S.A. • L-2122 • Rev. 7/03
Mounting Ring
Sensor
