Transcript
January - September 2007
0704383
ISO-TECH the value of accuracy •sOJ,Ec|<_
С
О
j -=i
si
' С
.....
IS4«5t
,»S*i
Test and Measurement (£, ЮЕ-Интернейшнл ^ ^ ^
Финляндия Эстония Латвия Литва Россия Украина
Электронные компоненты, источники питания измерительные устройства, инструмент 197342, Санкт-Петербург ул.Торжковская, 5, офис 426 тел.: (812) 324-4008 факс:(812) 327-1304
www.yeint.ru
115054, Москва ул. Дубининская, д.71, стр.5 тел.: (495) 783-9662 факс:(495) 783-9663
www.rsrussia.ru
620144, Екатеринбург ул. Куйбышева, д. 55, офис 321 тел. (343) 365-9040 факс: (343) 365-9040
[email protected]
ISO-TECH the value of accuracy We offer a wide selection of Test and Measurement equipment. This brochure gives an overview of our entire Iso-Tech range.
/ Three-year warranty on all ISO-TECH products J UKAS calibration available across the range
)йк| ШШ
/ Fast reliable delivery on all products / Free technical support from your RS distributor / Quality and reliability endorsed by
:*
Table of Contents Multimeters Compact digital multimeters
4
Digital hand-held multimeters
6
Digital high performance multimeters
9
Digital bench multimeters
10
Current probes
11
Current clamp meters
Ш
• v «•Ч-ТШСН
•"•""
•
Pocket current clamp meters
12
Current clamp meters
13
Power clamp meters
17
Power quality testers
18
Electrical installation testers Insulation tester
20
Earth tester
20
[
4 • - • ' Oscilloscopes
•t*
MM
Analogue oscilloscopes
21
Digital oscilloscopes
23
Mi
Power supplies
Я
ANALOGUE series power supplies
24
DIGITAL series power supplies
25
PROGRAMMABLE series power supplies
27
IW.I'I'inmifc'JIIKm'll
entation
Function generators
29
Component meters and calibrators
31
Arbitrary wave-form generator
32
Acoustic measurement Light measurement Electromagnetic measurement
(?) www.rs-components.com
ISO-TECH
Pen style multimeter IDM 17
a
The IDM 17, an accurate pen-style instrument that will measure: AC and DC voltage, resistance and continuity, and has a diode test facility. Additionally, with the ICA 15 current clamp adaptor, you can transform the IDM17 multimeter into a versatile instrument to safely measure AC current. The IEK10 electrician kit includes both the IDM 17 multimeter and the ICA 15 current adaptor in a handy carry pouch.
ICA15
Specifications Manual and automatic range and on-screen measurement retention. 65-segment analogue-style bar graph. Electrical protection category: IDM 17: CAT II600V /CAT III 300V ICA15CATII600V
DC Voltage
AC Voltage
AC Current'
Resistance
Maximum value
600V
600V
300A (50/60 Hz)
30МП
Resolution
WOpV
1mV
-
0.10
±(0.7%+ 2)
±(1.7%+ 5)
±(1.9% + 0.5A)
±(1.0%+ 2)
Basic accuracy2
The IDM 17 multimeter can measure AC current by using the ICA 15 current probe. Accuracy is indicated as ± ( % of reading + no. of counts)
Size (Length x Width, x Depth): 102 x 72x36 mm Weight: 150 g Accessories included (IDM 17): Test probes, test leads, alkaline batteries, instruction manual and carrying case.
1 Model
RSCode
IDM 17 Multimeter
836-360
ICA 15 Current probe
186-1654
IEK10 Electrician kit
186-1676
Compact digital multimeters IDM 60 series Economical and easy to use, the IDM 60 series instruments offer a robust construction and a long, problem-free useful life. They feature a 3200-count, 12mm high LCD display with analogue bargraph, full autoranging with manual override and a display hold function. Common features include voltage and resistance measurements, diode and continuity checks.
Specifications Maximum г 65-segment analogue-type bar graph. Automatic scale adjustment (AUTORANGE). On-screen data retention mode (HOLD). Electrical protection category: IDM 63 N: CAT III 600V IDM 67 N: CAT II600V Size (Length x Width, x Depth):
1
IDM 63 N
IDM 67 N
±(0.5%+ 2)
±(0.7%+ 2)
600V
1mV
±(1.5%+ 5)
±(1.7%+ 5)
10A1
0.1 pA
±(1.0%+2)
±(1.2%+2)
0.1pA
X
±(1.7%+ 4)
0.10
±(0.8%+ 2)
±(1.2%+ 4)
0.001 pF
X
X
600V
AC voltage DC current AC current
;:
10A
Resistance
30MO
Capacitance
3000uF J
Not (DM63
Basic Accuracy [±(% of reading + no. of counts)]
0.1 mV
DC voltage
IDM 63: ЗОООцА
Resolution •
X Measurement type not available in corresponding multimeter
165x80x36 mm
Codes
Weight: 350g Temperature coefficient: 0.15 x (specified accuracy)/°C (<18°C or >28°C) Accessories included: Test lead set, alkaline batteries, instruction manual and protective case/support.
ISO-TECH
Model
RSCode
IDM 63 N Multimeter
624-9374
IDM 67 N Multimeter
243-2954
Compact digital multimeters IDM610 An innovative and versatile instrument with an integral, open jaw current clamp sensor, which allows you to measure up to 100A AC/DC in crowded cable areas. The shock absorbing holster accommodates both integral test leads and clamp sensor.
IDM610
Specifications DC Voltage
AC Voltage
DC Current
AC Current
Maximum range
600V
600V
100A
100A
Resolution
0.1 mV
ImV
0.1A
0.1A
±(1.5%+ 4)
±(1.5% + 5)
± ( 2 % + 5)
±(2%+ 5)
Basic accuracy1
3400 count LCD with 33 segment analogue bargraph Continuity test 0-600V AC/DC autoranging Data hold facility
Resistance
Frequency2
Electrical protection category: Cat II600V/CAT III 300V
Maximum range
34MO
300kHz
Size (Length x Width, x Depth):
Resolution
0.1Q
1Hz
± ( 1 % + 3)
±(0.1%+ 1)
Basic accuracy 1 2
128x92x27 mm Weight: 220g
Accuracy is indicated as ± ( % of reading + no. of counts} The frequency of either the current or voltage can be measured.
r
Power: 2x 1,5V AAA alkaline batteries Operating Temperature: 0 - 40°C <85%RH Accessories included: Integral test leads, batteries and instruction manual.
Codes
1 Model IDM 610 Multimeter
(?) www.rs-components.com
RSCode
i
528-8413
ISO-TECH
Hand-held digital multimeters IDM 70 series ISO-TECH's IDM 70 series multimeters offer excellent performance with CAT IV 600V rating suitable for tough industrial and electrical environments. All have a 6000 count large scale display for better measurement resolution, auto and manual ranging and come with a protective holster with tilt stand and probe holder.
IDM 71
IDM 73
IDM 72
Digital resolution (Counts)
IDM 71
IDM 72
IDM 73
6000
6000
6000
—2
AC/IX voltage
•
AC/DC current
DC only'
True RMS AC measurements
I
О
Resistance/opacity measurement frequency measurement Diode test/acoustic continuity check Manual and automatic range option (AUTORANGE) Display HOLD Maximum and minimum record (MIN/MAX) Automatic power off (battery save) RS 232 interface
О
о
Display backlight
о
о
1
The ЮМ 71 multimeter is dble to measure DC current only in uA mode, •' Software kit andrtS2 !2 connection cable available separately.
Specifications
Maximum range
DC Voltage
AC Voltage
DC Current
AC Current
1000V
750V
10A4
10A
0.1mV
0.1 mV
O.lpA
1mA
±(0.5% + 2)
±(0.9%+ 5)
+(1% + 2)
±(1.5%+ 5)
Resistance
Capacitance
Frequency
Maximum range
60Mfi
6mF
60MHz
Resolution
O.lf!
1pF
1Hz
±(0.7% + 2)
±(1.9%+ 8)
±(0.01%+ 1)
Resolution Basic accuracy3
3
Basic accuracy 1 4
Impact and drop resistant. Automatic shutoff to maximize the useful life of the batteries. Electrical protection category: CAT IV 600V / CAT III 1000V Size (Length x Width, x Depth): 195 x 126 x 5 8 m m Weight: 550g Power: IDM 71: t w o 1,5V alkaline batteries IDM 72 & 73: one 9V alkaline battery
Accuracy is indicated as i (% of reading +- no. of counts) The rmximum range in yA mode is 6000uA.
Typical battery life: 300 hours Temperature coefficient: 0.15 x (specific accuracy)/°C (<18°C or >28°C)
Codes • Model
RSCode
IDM 71 Multimeter
443-4104
IDM 72 Multimeter
443-8645
IDM 73 Multimeter
443-4110
Software &RS-232 cable for IDM 73
460-9881
ISO-TECH
!
Accessories included: Test lead set, alkaline batteries, instruction manual and protective holster.
Hand-held digital multimeters IDM 90 Series High accuracy, autoranging instruments, the IDM 90 Series offer a wide range of options and capabilities to meet the requirements of the most d e m a n d i n g situations.
IDM 91
IDM93
IDM97'
IDM97II
IDM98II
IDM99II
Digital resolution (Counts)
2000
2000
3200
3400
4000
4000
Analogue-style bar graph
О
О
AC/DC voltage AC/DC current
• •
• •
• • •
• • •
True RMS AC measurements
О
О
О/»
О
Diode/continuity test
• • о о о о о •
• • • •
• • о о о • о •
• • о • о • о о
Resistance measurement Capacitance measurement Frequency measurement Temperature measurement Autorange and HOLD MAX/MIN and relative mode Water resistance 1
0
о о о
1
О
• О
о
О
ЮМ 97 RMS: same features as IDM 97 plus the ability to measure True RMS
Specifications Type of
Maximum Value/Resolution' Ш^ЖП^ f Г'УЛД^Я
Basic Accuracy [+(% of reading + no. of counts)] I0M97 J
IDM 97II
IDM 9 8 I I / 9 9 I I
DC voltage
600V/ 0.1 mV
600V/ IOUV
1000V/ lOOpV
1000V/100pV
0.5%+ 1
0.5%+ 2
0.25%+ 1
0.25%+ 1
AC voltage
600V/0.1 mV
600V /1mV
750V/0.1 mV
750V/0.1mV
1.3%+ 4
1.3%+ 5
1.3%+ 5
1.3%+ 5
DC current
10A/0.1uA
ЮА/O.lpA
10A/10uA
10A/10uA
1% + 1
1.2%+ 2
1.5%+ 2
0.7%+ 2
measurement
IDM 9811/99II
IDM91/93
AC current
10A/0.1uA
WA/O.luA
WA/IOpA
10A/10uA
1.5%+ 3
1.5%+ 3
2.0%+ 5
2.0%+ 5
Resistance
20МП/0.1П
30МО./0.Ш
30MO/0.1Q
40MO/0.1G
0.8%+1
1% + 2
0.7%+ 3
0.4%+ 3
Capacitance
200uF/1pF2
X
X
40mF/1pF
2%+ 4
X
X
2.0%+ 8
X
30MHz/1Hz
40MHz/1Hz
1% + 3
X
0.01%+ 1
0.01%+ 1
Frequency
2
200KHz/1Hz
2
Maximum measurement value / Most accurate resolution X Measurement type not available in corresponding multimeter
Not available in IDM 91
1
IDM 97 RMS: same features as IDM 97
Maximum temperature measurement scale: 800°C (Only IDM 99II) Maximum temperature measurement accuracy: 1% + 4°C (Only IDM 99II) Electrical protection category: IDM 91 & 93: CAT II 600V/ CAT III 300V IDM 97(RMS), 97II, 98II & 99II: CAT II1000V / CAT III 600V
Model
RSCode
IDM 91 Multimeter
159-2140
IDM 93 Multimeter
298-1096
IDM 97 Multimeter
219-743
IDM 97 RMS Multimeter
819-573
Accessories included: Test leads, alkaline batteries, instruction manual and protective case/support.
IDM 97II Multimeter
369-2185
IDM 98II Multimeter
369-2191
Type К thermocouple & adaptor (IDM99II only)
IDM 99II Multimeter
369-2214
(*) www.rs-components.com
ISO-TECH
Hand-held digital multimeters IDM 100 Series Designed for industrial use, the IDM 100 Series multimeters feature a 4000 count display with a 42 segment bargraph, autoranging, and memory store/ recall facilities for additional versatility.
Digital resolution (Counts)
IDM 101
IDM 103 & 105
IDM 106
4000
4000
4000
Analogue-style bat graph AC/DC voltage AC/DC current True RMS Diode / continuity test Resistance and capacitance measurement Frequency measurement Temperature measurement Martial and automatic range selection Display HOLD Maximum and minimum record (MIN/MAX) Relative measurements Data storage memory
О
IP64 protection grade
Specifications Type of
Maximum Value/Resolution'
Basic Accuracy [±(% of reading + no. of counts)]
Screen value update every 500ms. Bar-graph value update every 50ms.
measurement DC voltage
600V/ 0.1 uV
lOOOV/O.lmV
AC voltage
600V/luV
750V/0.1mV
1.0% + 5
1.5%+ 5
1.5%+ 5
Electrical protection category: CAT II1000V/CAT III 600V
DC current
10A/1uA
WA/WuA
0.8%+ 2
0.7%+ 2
0.5%+ 2
Size (Length x Width, x Depth):
AC current
10A/1uA
10A/10uA
1.5%+ 5
1.5%+ 5
1.5%+ 5
0.5% + 2
0.25% + 2
0.1%+ 2
Resistance
40МП/0.Ш
40MG/0.1Q
0.7% + 2
0.6%+ 3
0.4%+ 2
Capacitance
40uF/1pF
40mF/1pF
1.0%+ 4
2.0%+ 8
2.0%+ 8
IOMHZ/O.OIHZ
400MHz/1Hz
0.1%+ 4
0.01% + 1
0.01%+ 1
Frequency
185x86x32 mm Weight: 370g Power: IDM 101,103 & 105: t w o 1 .SV alkaline batteries IDM 106: one 9V alkaline battery Typical battery life: IDM 101:1000 hours IDM 103 & 105:500 hours IDM 106:300 hours
1 Maximum measurement value / Most accurate resolution Temperature (only for IDM 106): Maximum value 800" С & Accuracy 1 % + 3 4
RSCode
Temperature coefficient: 0.15 x (specified accuracy)/°C (< 18°C or >28°C)
IDM 101 Multimeter
422-365
Operating temperature: 0-50°C - 80% R.H.
IDM 103 Multimeter
436-4730
IDM 105 Multimeter
436-4819
Accessories included: Test lead set, alkaline batteries, instruction manual and protective case/support.
IDM 106 Multimeter
436-5345
1 Model
ISO-TECH
High performance digital multimeters IDM 300 series High specification instruments designed for electronic, telecom and other demanding applications, they offer a large format, triple display with an 80 segment bargraph with zoom and centre zero options, true rms measurement and full autoranging on 12 functions.
I
IDM303/305 4000/40000 selectable display resolution Large format triple display with backlight Analogue bargraph with ZOOM and centre zero option AC/DC voltageS current True RMS measurement (AC / DC+AC) Diode & continuity Resistance and capacitance measurement Frequency, period & duty cycle Manual and automatic ranging Fast peak hold (0.5ms) MIN/MAX/MAX-MIN record with time stamp High/low limits with lime stamp Relative measurement mode with % display option Programmable high & low level alarm dBm and dB readings with selectable referee —1
R5232 communication port ' To use the RS-232 connection port with the IDM 303 model, you must purchase the RS-232 cable (code RS 456-7456) and WINDMM300 connection software (code RS - 456-7440) separately.
Specifications Large-format, triple-display with 80-segment analogue-type bar graph.
Type of
Maximum Value/Resolution'
Basic Accuracy [±(% of reading + no. of counts)]
measurement
IDM 303 / 5
IDM 303
IDM 305
Screen value update every 250 ms and bar graph update every 50 ms.
DC voltage
1000V/1uV
±(0.1%+ 2)
±(0.06%+ 2)
Water resistant sealed case.
AC voltage
750V/lOpV
±(0.9%+ 5)
±(0.7%+ 5)
DC current
lOA/luA
±(0.3%+ 4)
±(0.2%+ 4)
AC current
10A/1pA
±(1% + 8)
±(0.8%+ 8)
Resistance
40MQ/10mfl.
±(0.4%+ 2)
±(0.3%+ 2)
Size (Length x Width, x Depth):
Capacitance
10mF/1pF
±(1.4%+ 20)
±(0.9%+ 20)
212x100x55 mm
Frequency
4MHz/ 0.01Hz
±(0.1%+ 1)
±(0.01%+ 1)
20% to 80%
±(0% + 6)
±(0% + 6)
-200-1200 оС/0.0ГС
2°C + 1
2°C + 1
Easy to use due to on-screen menu selection. Electrical protection category: CAT II1000V/CAT III 600V
Weight: 650g Typical battery life: 100 hours Accessories included: Test lead set, alkaline batteries, protective holster, soft carrying case, type К thermocouple adaptor, bead type thermocouple and instruction manual. The IDM 305 model also includes: RS-232 connection cable and WINDMM 300 connection software.
@ www.rs-components.com
Duty cycle Temperature
Maximum measurement value / Most accu rate resolution
Model
RSCode
IDM 303 Multimeter
329-3794
IDM 305 Multimeter
329-3801
ISO-TECH
Bench multimeters IDM 200 series Cost effective bench multimeters for laboratory and educational establishments, the IDM 200 series are reliable and accurate and w i t h their dual mains voltage / battery operation invaluable for field operations.
H
IDM 201
IDM 203
IDM 205
Digital resolution (Counts)
2000
4000
4000
Analogue-style bar graph
О
AC/DC voltage
• • о • • о о • • о о о •
AC/DC current True RMS AC measurement Diode/continuity test Resistance measurement Capacitance measurement Frequency measurement Manual and automatic range Display HOLD Maximum and minimum record (MIN/MAX) Relative measurements Data storage memory Backlight
О
•
Specifications Type of measurement
Maximum Value / Resolution'
НШПНП
'
Basic Accuracy ±(% of reading + no. of counts)] IDM 201
IDM 203
ЯЯШЗШЗЙ1
DC voltage
G00V/0.1mV
600V/0. ImV
0.5%+ 2
0.5%+ 2
0.1%+ 2
AC voltage
600V /ImV
750V/0.1mV
1.5%+ 5
1.0%+ 5
0.5%+ 5
DC current
10A/0.1uA
10A/1uA
1% + 2
0.75%+ 2
0.4%+ 2
AC current
10A/0.1uA
10A/1uA
2.5%+ 5
1.5%+ 5
1.0%+ 5
Resistance
20MO/0.1Q
40MQ/0.1G
0.75%+ 2
0.75%+ 2
0.4%+ 2
Capacitance
X
40uF/1pF
X
1% + 4
1% + 4
Frequency
X
1MHz/0.01Hz
X
0.1%+ 4
0.1%+ 4
1
Test lead storage compartment. Electrical protection category: CAT II 600V/CATIII 300V Size (Width x Height x Depth): 218x195x75 mm Weight: 1,300 g Power: 90-260V AC ~ 50/60Hz Batteries: Six 1.5V alkaline batteries Typical battery life: 1200 hours without backlight 80 hours with continuous backlight
Maximum measurement value / Most accurate resolution
Temperature coefficient: 0.15 x (specified accuracy)/°C (<18°Cor>28°C) 1 Model
RSCode
IDM 201 Multimetet
212-865
IDM 203 Multimeter
212-871
IDM 205 Multimeter
212-887
ISO-TECH
Щ
Operating temperature: 0 - 5 0 X - 80% R.H. Accessories included: Test lead set, mains lead, carrying strap and instruction manual.
Current probes ICA series The ICA series of current probes are the perfect companion for your ISO-TECH digital multimeter, allowing you can take safe, non-contact current measurements without the need to break into the circuit.
ICA 3 0 0 0 A 600mm flexible current probe with both 300A AC and 3000A AC measurement ranges, ideal for use with multimeters, recorders and data loggers. ICA 3 2
• Wide bandwidth 10Hz -10kHz ICA 3 1
• Low phase shift < ± Г • 1.7m probe and output lead lengths • 0.2% linearity
ICA 32
ICA 31 Range Output mV/A
ICA 39 T
ICA 3000
1
400AAC
100A AC/DC,
600A AC/DC
100A AC/DC,
1000A AC/DC
300AAC
ЗОООААС
ImVAC
10mV AC/DC
1mV AC/DC
10mV AC/DC
ImV AC/DC
ImVAC 3.33mVAC
O.lmVAC 0.333mVAC
Most accurate resolution
Specifications Power: One 9V alkaline battery (ICA32 & ICA39T) 2 x 1.5V AA Alkaline (ICA 3000) Typical battery life: 60 hours, 300 hours (ICA 3000)
Electrical categoiy EN61010-1
ICA 32
ICA39T
ICA 3000
CAT II600V/ CAT III 300V
CAT III 1000V
CAT III 600V
-
Min. load lOOkQ
Min. load ЮОкО
Min. loadIkO
±(1.9% + 0.5A)
± ( 2 % + 2A)
±(2.9% + 5A)
1 % of full scale
Min. load impedance Basic accuracy
Operating temperature: 0-50°C ~ 8 0 % R.H. 0-70°C (ICA 3000)
Conductor max 0
Accessories i n c l u d e d : Alkaline batteries and instruction manual.
Weight
(?) www.rs-components.com
ICA 31 CAT II600V/ CAT III 300V
Size(LxHxD)mm
29mm
34mm
51mm
170mm
148x72x36
203x60x27
232x90x32
130x80x43
250g
380g
420g
430g
Model
RSCode
ICA 31 Current probe
186-1660
ICA 32 Current probe
243-0655
ICA 39 T Current probe
409-8534
ICA 3000 Flexible current probe
621-2085
ISO-TECH
Pocket clamp meter ICM A series Compact clamp meter is ideal for electrical maintenance and fault finding. The ICM A7-3, w i t h its open jaw, provides instant conductor connection and eliminates the need to disturb surrounding conductors, and w i t h its small size lets you access tight enclosures and areas where space is limited.
ICMA7-3
1
2000
Digital resolution (Counts) Maximum diameter of the conductor to measure
16mm 2.5 times /sec.
Measurement rate AC voltage DC voltage AC current Resistance measurement Continuity test Display HOLD Automatic power off
Specifications Maximum Value/Resolution'
Type of
Electrical category: ICM A7-3: CAT III 600V
Basic Accuracy [+(% of reading + no. of counts)]
measurement
ICMA7-3
ICMA7-3
AC voltage
600V/ IV
±(1.5% + 3)
ICM A 7 - 3 : 1 7 5 x 8 4 x 3 1 m m
DC voltage
600V/1V
±(1.0% + 2)
Weight: ICM A7-3:280 g
AC current
200A/0.1A
±(3.0%+ 3)
Power: One 9V battery
Resistance
20000/10
±(1.0%+ 2)
1
Size (Length x Width, x Depth):
(alkaline batteries recommended)
Maximum medburemc nt vtlue / Most accurate resolution
Typical battery life: 250 hours Temperature coefficient: 0.15 x Accuracy / °C (T < 18°C or28°C) Operating temperature: 0-50°C ~ <80% R.H. Accessories included: Test lead set, carrying case, batteries and instruction manual.
ISO-TECH ICM20 AC current clamp meter An economical clamp meter designed for safe non-intrusive AC current measurement up to 400A, w i t h readings displayed on a 2000 count large scale LCD. • Maximum conductor size 27mm • Display and MAX hold functions • Auto power-off
Specifications
AC current
Range
Basic Accuracy
Electrical category: Cat III 600V
20/200/400A
±3%+0.05A/±2%+0.5A/±2%+5A
Size (Length x Width, x Depth): 180 x56 x32mm Weight: 250g
Codes
^
Model
RSCode
ICM20 Current clamp meter
620-7291
ISO-TECH
Power: 1 x 9V PP3 alkaline batteries Typical battery life:: 200 hours (typ) Accessories included: PP3 battery, carry case and manual
nt clamp meters ICM 30 series Industrial quality current clamp meters, the ICM 30 series offer a wide range of either AC or AC/DC current measurement options to meet the requirements for general industrial maintenance and electrical testing applications.The LED backlit display makes these meters suitable for use in low light levels and have high safety compliance suitable for industrial applications.
ICM30/30R ICM 3090
В
ICM 3090
ICM 30
ICM 30 R
Digital resolution (Counts)
4000
4000
4000
Maximum diameter of the conductor to measure
27mm
22mm
22mm
AC current
• • •
AC voltage DC voltage
DC current
0
True RMS AC measurement
О
Resistance measurement
• • • • о •
Continuity test Automatic and manual scale options (AUT0RANGE) Display HOLD Maximum and minimum record (MAX/MIN) Automatic power off
•
Specifications Electrical category: CAT III 300V/CAT II600V Size (Length x Width, x Depth): ICM 3090:188x62.5x30.5 m m ICM 30 and 30 R: 1 9 2 x 6 6 x 3 7 m m Weight: ICM 3090:185 g ICM 30 & 30 R: 205 g Power: 2 AAA alkaline batteries Typical battery life: ICM 3090:300 hours ICM 30 & 30 R: 60 hours
Type of
Maximum Value/Resolution'
measurement
Basic Accuracy [ ± ( % of reading + no. of counts)]
ICM 30/ICM 30 R
ICM 3090
ICM 30/ICM 30 R
600V/0.1V
600V/0.1mV
±(1.5%+ 10)
±(1.5%+ 5)
DC voltage
600V/0. IV
600V/0.1mV
±(1.0% + 5)
±(0.5%+ 2)
AC current
400A/0.01A
300A/10mA
±(2.0%+ 10)
±(1.0%+ 3)
DC current
X
ЗООА/ЮтА
X
±(1.0 + 2)
Resistance
400Q/0.1Q
40МО/0.1П
±(1.0%+ 5)
±(1.2%+ 2)
AC voltage
Maximum measurement value / Most accurate resolution
Accessories included: Test lead set, batteries and instruction manual.
[ Model
(?) www.rs-components.com
RSCode
ICM 3090
409-8966
ICM 30
388-6706
ICM 30 R
388-3921
-TECH
Current clamp meters ICM 30 Series
ICM 3611/36RII
ICM 3311 /33RII
ICM 36R
•
ICM 33 II/33R II
ICM 36R
ICM36II/36RII
Digital resolution (Counts)
2000
2000
4000
Maximum conductor size
34mm
34mm
35mm
AC voltage
•
О
D( voltage
О
О
AC current
•
DC current
О
• • •
True RMS AC measurement1
о/* • • о • о •
Resistance measurement Continuity test Automatic scale (AUTORANGE) Display HOLD Maximum record (MAX HOLD) Automatic power off 1
1
О/*
О
о о • о •
True RMS measurement on 'fi'versions only.
I
Specifications Type of
Maximum Value/Resolution'
ТРГ-И
measurement
Electrical category: ICM 36 R: CAT III 300V/CATII600V ICM 33II / 33IIR / 36II / 36II R: CAT III 600V
BasicAccuracy ±(% of reading + no. of counts)]
H*'.Pi1!ttri!lH KM31I/SRI
ИЧ'Е''',Д 1ШТШШ1
AC voltage
600V/IV
X
600V/0.1mV
+(1.2%+ 3)
X
±(1.5%+ 5)
DC voltage
X
X
600V/0.1 mV
X
X
±(0.7%+ 2)
AC current
600A/0.1A
600A/0.1A
600A/0.1A
±(1.5% + 5)
±(1.9%+ 5)
±(1.9%+ 5)
DC current
X
600A/0.1A
600A/0.1A
X
±(1.9%+ 3)
±(1.5%+ 7)
Resistance
20000/10
X
40MO/0.10
±(1.5%+ 2)
X
±(1.2%+ 3)
Size (Length x Width, x Depth): ICM 33 II / 33 II R: 200x76x41 mm ICM 36 R: 203 x 60 x 29 mm ICM 36II / 36II R: 188 x 62.5 x 30.5 mm Weight: ICM36R:310g ICM 33II / 33II R and ICM 36II / 36II R: 360 g
Maximum measurement value / Most accurate resolution
Power: One 9V PP3 alkaline battery
[
Codes
• Model
1 RSCode
ICM 33II
369-2157
ICM 33 RII
369-2163
ICM 36 R
243-2932
ICM 36II
498-2574
ICM 36 RII
498-2580
f
Typical battery life: ICM 33 II / 3 3 II R: 200 hours ICM 36 R: 40 hours ICM 36II / 36II R: 120 hours Temperature coefficient: 0.2 x (specified accuracy) / °C (T<18<,Cor>28°C) Operating temperature: 0-40°C ~ <75% R.H. Accessories included: Test lead set, batteries and instruction manual.
AC and AC/DC current clamp meters ICM 130 Series Economically designed instruments with single hand operated rotary selector and buttons, and true rms readings in ac mode. The ICM 133R and ICM139R feature large jaw size, high current and voltage measurement capabilities plus CAT IV 600V safety rating essential for tough industrial and electrical applications. The PEAK HOLD feature captures and displays fast peak currents
•
ICM135R
•
ICM133R
• Digital resolution (Counts) Backlit display with analogue bargraph Maximum diameter of the conductor to measure
ICM135R
ICM133R
4000
4000
•
•
34mm
51mm
AC voltage DC voltage AC current DC current True RMS in AC measurements Resistance measurement Continuity test Frequency measurement Display HOLD Peak HOLD Maximum and minimum record (MAX/MIN) Automatic power off
Г
Specifications Electrical category: ICM 135: CAT III 600V ICM 133: CAT IV 600V / CAT III 1000V
Type of measurement
ICM135R
1СМ1Ш
Size (Length x Width x Depth): ICM 1 3 5 : 2 2 0 x 7 6 x 5 0 m m ICM 1 3 3 : 2 7 5 x 9 0 x 5 1 m m
AC voltage
600V/0.1V
750V/0.1V
±(1.0%+ 5) ±(0.7%+ 2)
Weight: ICM 135:360 g ICM 133:420 g Power: One 9V battery (alkaline batteries recommended)
Maximum Value/Resolution'
Basic Accuracy [ ± ( % of reading + no. of counts)] ICMU5R
ICM133R
DC voltage
600V/0.1V
1000V/0.1V
AC current
600A/0.1A
1000A/0.1A
±(1.9%+ 5)
Resistance
4000/0.10
4000/0.10.
±(1.0%+ 3)
Frequency
400Hz/1Hz
400Hz/1Hz
±(0.1%+ 2)
Maximum measurement value / Most accurate resolution
Typical battery life: 200 hours Temperature coefficient: 0.2 x (specified accuracy) / °C (T<18°Cor28°C) Accessories included: Test lead set, carrying case, batteries and instruction manual
® www.rs-components.com
Model
RSCode
ICM135R
468-1170
ICM133R
468-1271
l:
•
Current clamp meters ICM100 Series
, uuuu •
<
•
ICM136R
•
ICM139R
I
ICM136R
ICM139R
Digital resolution Xounts)
4000
4000
Maximum diameter of the conductor to measure
35mm
51mm
AC voltage DC voltage AC current DC current True RMS in AC measurements Resistance measurement Continuity test Frequency measurement Display HOLD Peak HOLD Maximum and minimum record (MAX/MIN) Automatic power off
Specifications Type of
Maximum Value/Resolution'
measurement
ICM Ш
ICM 139
Backlit LCD display.
ICM 139
600V/0.1V
750V/0.1V
±(1.0%+ 5)
DC voltage
600V/0.1V
1000V/0.1V
±(0.7%+ 2)
AC current
600A/0.1A
1000A/0.1A
±(1.9%+ 5)
DC current
600A/0.1A
1000A/0.1A
Resistance
4000/0.10
4000/0.10
±(1.0% + 3)
Frequency
400Hz/1 Hz
400Hz/1 Hz
±(0.1%+ 2)
AC voltage
Analogue-type bar graph.
Basic Accuracy [ ± ( % of reading + no. of counts)]
±(1.9%+ 5)
Electrical category: ICM 136: CAT III 600V/CAT II 1000V ICM 139: CAT IV 600V/CAT I 1000V Size (Length x Width x Depth): ICM 1 3 6 : 2 3 5 x 7 8 x 5 1 m m ICM 1 3 9 : 2 7 5 x 9 0 x 5 1 m m
±(1.0%+ 3)
Weight: ICM 136:380 g ICM 139:420 g Power: One 9V battery (alkaline batteries recommended)
' Maximum measuremer r value / Most accurate resolution
Typical battery life: 100 hours Temperature coefficient: 0.2 x (specified accuracy) / °C (T<18°Cor28°C) 1
Codes 1 Model
Operating temperature: 0-50°C - <80% R.H.
RSCode
ICM136R
468-1265
ICM139R
470-0798
ISO-TECH
I
Accessories included: Test lead set, carrying case, batteries and instruction manual.
•
ISO-TECH 2000A AC/DC clamp multimeter A high current clamp meter with DC and AC RMS current measurement plus AC/DC voltage measurement, frequency, continuity and diode test functions. The large (55mm maximum) jaw capacity and over current protection up to 3000A AC/DC makes this meter suitable for many power and industrial motor applications.
Specifications LCD screen with 4000-count display and analogue-type bar graph.
Type of measurement '
Maximum Value/Resolution1
AC voltage
600V /1mV
±(1.5%+ 5)
On-screen Display HOLD.
DC voltage
600V/0.1mV
±(1.5%+ 3)
AC current
2100A/0.1A
±(2.0%+ 5)
Maximum and minimum measurement record (MAX/MIN).
DC current
2500A/0.1A
±(1.5%+ 3)
Resistance
40МО./0.Ш
±(1.5%+ 3)
Electrical category: CAT III 600V
±(0.5%+ 2)
Size (Length x Width x Depth): 271x112x46 mm
Frequency
... . ,. '. ._ [±(% of reading + no. of counts)]
r
1000kHz/0.01Hz
Automatic or manual range selection.
Maximum measurement value / Most accurate resolution
Weight: 647 g Accessories included: Test lead set, carrying case, batteries and instruction manual. 2000
327-6222
Model ILCM03 current leakage clamp multimeter Specifically designed for AC leakage current measurements, the ILCM03 clamp meter also includes comprehensive measurement features:40mA, 400mA, 4A, 40A, 100A AC measuring ranges 10pA resolution 30mm diameter conductor jaw capacity 400V AC voltage range 40,400П resistance and continuity range with beeper below 38П Max./min. function Zero/relative value function Data hold function
Measurement scales
Resolution1
Basic Accuracy2
40mA/400mA/4A/80A/100A
ЮиА
±(1.5%+ 3)
Type of measurement AC current AC voltage
400V
0.1V
±(1% + 3)
Resistance
400/4000.
0.1 Q
±(1% + 3)
2
LCD screen with 4000-count display. Display HOLD. Maximum and minimum measurement record (MAX/MIN). Electrical category: CAT III 300V
Most accurate resolution Accuracy expressed In ± ( % of reading + no. of counts)
Size (Length x Width x Depth): 2 1 0 x 6 2 x 3 6 mm Weight: 200 g
IICM03
(?) www.rs-components.com
409-8972
Accessories included: Test lead set, carrying case, batteries and instruction manual.
ISO-TECH
Power clamp meters Three industrial AC power clamp meters offering a range of true power, power factor, current and voltage measurements, the IPM 3000 are well suited for use by HVAC engineers, while the 6600 has the functions to display single and balanced 3 phase measurements required by engineers involved with industrial motors, compressor etc.
•
IPM3000
IPM2009R
IPM6600
Display resolution (counts)
10000
4000
10000 dual display
Maximum conductor size
40mm
55mm
55mm
AC curient measurement
• •
DC current measurement
О
• • •
AC & DC microamp measurement
• • • о о • • • • • • • • о •
AC/DC voltage measurement
Active power measurement kW Apparent powef measurement kVA Reactive power measurement kVAr 3 phase measurements (calculated) Phase angle & power factor measurement Resistance Diode & continuity measurement Capacitance measurement Temperature measurement (Type К thermocouple input) Frequency measurement Display HOLD Minimum and maximum measurement (MIN/MAX) Relative measurement Automatic power off
Щ
о
• 0
о о • • • о • о • • • о
О О О О
• • О О
о
Specifications Dual-display LCD screen t o view t w o measurements at once (except IPM 2009).
Type of measurement
Resistance measurement up t o 1OOMfi (except IPM 2009). Electrical category: CAT III 600V Size (Length x W i d t h , x Depth): IPM 3000:228 x 76 x 39 m m IPM 2009 and 6600:271 x 112 x 46 m m Weight: IPM 3000:465 g IPM 2009 & 6600:647 g
Maximum Value/Resolution' IPM 3000
IPM 2009
AC voltage
600V/0.1mV
DC voltage
600V/ 0.1 mV
800V/0.1V
AC current
1000A/10mA
2100A/0.1A
DC current
ЮООА/ЮпА"
2500A/0.1A
600kW/10W2 Power
IPM 6600
.PM3000 ±(1% + 20)
±(2.0% + 5)
±(1% + 20)
±(1.5%+ 3)
± ( 4 % + 20)
±(2% + 5)
± ( 1 % + 20)
±(1.5%+ 3)
2000A/0.1A
1200kW/0.01kW
600kVA/10VA!
Basic Accuracy [±(% of reading + no. of counts)]
± ( 5 % + 20)
±(1.5%+ 5)
±(2.5% + 5)
±(2.5%+ 5)
±(2% + 0.05kW) ±2°
±(2.5%+ 20)
Phase angle
±4570.1°
X
±4570.01°
±3°
X
Power: One 9V battery (alkaline batteries recommended)
Temperature
900°C/0.1°C
iooooc/o.rc
X
±(1.0% + ГС)
±(1.0% + 2°C)
X
Frequency
1kHz/0.1Hz
X
400Hz
±(0.5%+ 2)
X
±(0.5% + 2)
Typical battery life: 80 hours
Resistance
Ш/0.10.
400П/0.10
X
±(1% + 10)
±(1.0%+ 2)
X
X
±(1% + 10)
X
X
7000uF/1nF
Operating t e m p e r a t u r e : 0-50°C ~ <80% R.H.
Capacitance
Accessories included: Test lead set, carrying case, batteries and instruction manual.
Maximum measurement value / Most accurate resolution 1 Active power 3 Apparent power ' AC -t-DCTrmsiPM 3000 only
1 Model
ISO-TECH
X
RSCode
IPM 3000
450-1052
IPM2009R
388-6425
IPM 6600
327-6216
Power quality testers AC power quality testers with comprehensive functionality to analyse, and diagnose power quality and power disturbance problems in single phase and balanced 3 phase electrical installations and power circuits. Logging facility and software is supplied enabling remote control, monitoring and analysis from a PC.
IPM 3005
IPM 6300 IPM 6200
| AC RMS current range
IPM3005
IPM6200
IPM6300
3000A
1500А
3000A
В
О
Graphical waveform display Graphical phase diagram display
О
Backlit display
о
Active power measurement W kW, HP Reactive power measurement VAR, kVAr Apparent power VA, kVA Power factor and phase angle Energy calculation WHkWH Voltage and current harmonic measurement up to 50th order
о
Graphical harmonic analysis Analysis of %THD
0
Transient detection of swell, dip and outage
о • • о о
Fast peak HOLD function (39ps) Max, min and display hold functions Maximum demand over preset period Real time clock Data logging memory
8000 readings
50000 readings / 32000 transient events
• • •
USB Interface and software Selectable CT ratios Fast Peak HOLDS MIN/MAX HOLD
Specifications Range
Type of
| Electrical category: CAT III 600V
Bask Accuracy
measurement
IPM3005
IPM6200
IPM6300
IPM3005
AC current RMS
0-3000A | 4-1500A
0-3000A
±1% of range
AC voltage RMS
4-600V
±0.5% ± Sdgts
±0.5%±5dgts
±0.5% ± 5dgts
0.01-9999kW/kVA/kVAr
±1%of range
±1% of range
±1% of range
-180° to 180° 0°to 360°
±2° ±2"
±1° + 1°
±2° ±2°
Harmonics of ACV (>AC80V50/60Hz)
1 - 20th 21-50th
±2%±0.5V ±4%+0.5V
±4%±0.5V ±4%±0.5V
±2%±0.5V +4%±0.5V
Typical battery life: 100 hours
Harmonics of АСА (<300A50/60Hz)
1 - 20th 21-50th
±2%±0.4A +4% ±0.4A
±2%±0.4A ±4% ±0.4A
±2%±0.4A ±4%±0.4A
Temperature coefficient: 0.2 x (specified accuracy) / °C (T<18°Cor28°C)
Power measurement Phase angle
Programmable CT Ratio
1-250
1-3000
1-3000
Maximum conductor size
170mm
55mm
170mm
IPM6200 ±1.0%±5dgts
±1%of range
Weight IPM3005&IPM6300:430g IPM6200: 640g Power: 2 x 1.5V AA alkaline batteries
Accessories included: alkaline batteries, test leads, crocodile clips, USB lead, software and manual.
Model
RSCode
IPM3005 Flexible power quality tester
621-2091
IPM6200 Power quality clamp meter
621-2114
IPM6300 Flexible power quality analyser
621-2108
® www.rs-components.com
Size (Length x W i d t h , x Depth): IPM3005 & IPM6300 130 x 80x 4 3 m m I P M 6 2 0 0 : 2 1 0 x 6 2 x 35.6mm
ISO-TECH
IIT2301 and IIT2302 insulation tester Two electrical test instruments combining a triple voltage insulation tester w i t h a 200mA continuity/resistance tester that complies w i t h EN61557-2, BS7671 and EN61010-1
IIT2301
IIT2301
IIT2302
Analogue
Digital LCD with bargraph
Display backlight
•
О
Bargraph indication of test voltage
О
Lock-down test button for continuous operation
• • •
Test lead resistance nulling
• • •
Auto
Auto capacitive circuit discharge
О
•
Display
IIT2302
Live circuit warning
|
Specifications Bargraph indication of test voltage Lock-down test button for continuous operation
Insulation Tests
Live circuit warning
Measuring range
Auto null
Nominal output current
Auto capacitive circuit discharge
DC test voltages
250V/5O0V/1000V 100/200/400MO
20/200/2000MO
1mA DC
1mA DC 20/200MO±1.5%Rdg + 3 digits
5% of reading
Basic accuracy
Electrical category: Cat III 300V
Continuity Tests
Size (Length x Height x Depth):
Continuity resistance range
175x115x86mm
Basic accuracy
Weight: 640g
Continuity test current
Power: 6 x 1.5V AA alkaline batteries Operating temperature: 0 ~ 40°C <85%RH.
Open circuit voltage output
Accessories included: Alkaline batteries, test leads, crocodile clips and instructions.
1 Model
2OOMfl±10%Rdg + 3 digits
0-200,0-2000,0-20000
0-20,0-200
1.5%Rdg+5 digits
+3%(FS) 200mA (nominal) 4to9VDC
RSCode
IIT2301 Analogue insulation & continuity tester
530-5681
IIT2302 Insulation & continuity tester
530-5697
IET1700 earth tester The IET 1700 earth tester is specifically designed to measure the grounding resistance, which is one of the measurements required in current EN61557 and BS7671 /16th Edition wiring regulations. Using a 2mA & 820Hz current (which does not trip the installation's circuit breakers), the IET 1700 is able to measure the grounding resistance in an electrical system using three convenient measuring scales: 0-39,99,0-399.9П & 0-3999Q. The IET 1700 is also able to measure the voltage of the ground current.
Specifications Large backlit 4000-count LCD screen with analogue-type bar graph. On-screen data value retention (HOLD).
Grounding resistance Measurement range
0..39,99/399,9/3999MO
0.. 399.9V
±(2%+ 0.20)
± ( 1 % + 4)
Accuracy' Maximum and minimum measurement registration.
1
Ground voltage
Accuracy is indicated as ± ( % of reading + no. of counts)
Electrical protection category: CAT III 300V Size (Length x Height x Depth): 140 x 2 0 0 x 9 5 m m Codes
Weight: 990 g Accessories included: Test cables, 4 test spikes, instruction manual and alkaline batteries.
ISO-TECH
1 Model IET1700Tester
RSCode 388-6431
gue oscilloscopes ISR 600 Series Three dual channel oscilloscopes, sturdy, easy to operate and highly reliable, all feature a 6" rectangular display with red internal graticule, and unique easy to use cursor and numerical readouts make waveform observations and measurements faster and accurate.
IItII •IIIIII1IIIIt V
Ш Ш
*Ш M ISR 6 2 2 / 3 5
v * <- с
#
1Щ
ft*
«Qj|
£g^
Ш :M
ISR 6051
•
Band width
ISR 622
ISR 635
ISR 6051
2 x 20MHz
2x 35MHz
2x 50MHz
10ns
7ns
Rise time
17.5ns
Vertical modes
CH1, CH2, DUAL(Chop/Alt), ADD, X-Y, CH2INV'
Vertical sensitivity
1mV~2mV/DIV ±5%; 5mV~5V/DIV ±3% ISR 622,635 & 6051: A ISR 658: A, A INT, В, В TRIG D
Horizontal modes A horizontal sweep time
0.1us~0.5s/DIV±3%
Sweep amplification
xlO
X5,x10&x20
Trigger sources
CHI, CH2, LINE, EXT
Trigger slope
Positive or negative polarity AC, DC2, HF-REJ, TV
Couplings
AUTO, NORM, TV, SINGLE3
Trigger modes ISR 60S 1: Wave squared; 1 KHz ± 5 ; 0,5Vpp ± 3
20us/div min ±3%
0.1us~0.5s/DIV±3%3
В horizontal sweep time
1
1
!
' Not available in ISR 6051
Not available in ISR 622« 635
Other features High-stability and low-drift wave f o r m representation.
Probe calibration output.
Reading and measurement with cursors o n the TRC screen (only ISR 6051).
Input coupling
AC; DC, GND
Input voltage
400VP,*max(DC+AC)
Wave squared; 1KHz±5%; 1Vpp±2%'
Input impedance
Probe calibration output.
1MQ±3%//25pF
Size of TRC
Trip synchronized w i t h TV.
6"
TRC screen grid Electrical protection category: CATII(400Vpeakmax.CA)
8x10 divisions of k m
Cursors3 'ISR6051:Wavesquated;lKHr±5;0,5Vpp±3
Size (Length x W i d t h , x Depth):
AV, AV%2, AVdB2, ДТ,1/ЛТ, DUTY2, PHASE2 1
Not available in ISR 6051
' N o t available in ISR 622 S 635
310x150x455 mm Weight: 8.3 kg Power: 100-240 AC ± 1 0 % ~ 50/60Hz Power consumption: 60W maximum Operating temperature: 0-40°C Accessories included: Power cables (UK/ Euro), instruction manual and probes.
(?) www.rs-components.com
r
Codes
|
1 Model
RSCode
ISR 622 Oscilloscope
248-8985
ISR 635 Oscilloscope
326-4651
ISR 6051 Oscilloscope
514-4896
urn
Analogue oscilloscopes ISR 2000 Series The ISR2102 and ISR2112 are 10OMHz, two channel, dual sweep, portable oscilloscopes with cursor readout and digit panel setting.The ISR2112 has the addition benefits of memory save/recall, autoranging and variable graticule illumination.
В
ISR 2102 & 2112 Band width
3.5ns
Rise time
CHI, CH2, DUAL(Chop/Alt), ADD, CH2INV
Vertical modes Verticil sensitivity
2mV~5V/DIV±3%
Horizontal modes
MAIN (A), ALT, DELAY (B)
A horizontal sweep time
50ns~0.5s/DIV±3%
В horizontal sweep time
50ns~50ms/DIV±3%
x10
Sweep amplification
CHI, CH2, LINE, EXT
Trigger sources
Positive or negative polarity
Trigger slope
AC, DC, HFR, LFR
Trigger couplings Trigger modes
AUTO, NORM, TV
Automatic time scale adjustment
Only in ISR 2112
10 use-configuration memory storage
Only in ISR 2112
Other features Probe calibration output.
| High-stability and low-drift wave f o r m representation.
Wave squared; 1 KHz +5%; 2Vpp ±2% 1MO±3%//25pF
Input impedance Input coupling
AC; DC, GND
Input voltage
400VpMk max (DC+AC)
Reading and measurement w i t h cursors o n TRC screen. Dual time base w i t h variable retention and delayed sweep.
6"
SizeofTRC TRC screen grid
8x10 divisions of 1cm
Cursors
Work configuration memory storage.
uV,iV%,uVdB,uT,1/uT,AT%,Au
Work configuration block.
100-240Va.c.±10%,50/60Hz
Network connection Consumption
Probe calibration output.
70W max.
Operating temp.
TV synchronized trip.
0-40°C Z axis input. Electrical protection category: CAT II (400V p eak max.CA)
Codes
]
Size (Length x W i d t h , x Depth): 150x310x455 mm
RSCode
Weight: 9 kg
ISR 2102 Oscilloscope
363-2874
Accessories included: Power cables, instruction manual and probes.
ISR 2112 Oscilloscope
363-2896
1 Model
ISO-TECH
Щ
2 x 100MHz
Digital oscilloscopes IDS Digital Series High performance, dual channel 60MHz, 150 MHz and 250 MHz digital storage oscilloscopes with a choice of mono or colour displays. They offer a combination of trigger control, frequency response, time base versatility and other functions to facilitate measurements and observations generally only available on more expensive oscilloscopes.
1
IDS 706/806
IDS 710/810
IDS 720/820
2 x 60MHz
2 x 150MHz
2 x 250MHz
<5.8ns
<2.3ns
< 1.4ns
Bandwidth Rise time Vertical modes
•
CHI, CH2, ADD, DIF, X-Y, CH2INV
Vertical sensitivity
2mV~5V/DIV ±(3% + 0.05div • Volt/DIV + 0.8mV)
Horizontal modes
Primary, Window, Window Zoom, Rdl, X Y
Horizontal sweep time
lns~10s/DIV±0.01%
Sweep amplification
x1,x2&x5
Trigger sources
CHI, CH2, LINE, EXT
Trigger modes
Level, Auto, Norm, TV, Single, TV, Time and event delay, Edge, Pulse Width AC, DC, High freg. rejection, Low freq. rejection and noise rejection.
Couplings
100MS/S on each channel
Sampling freguency
25GS/S equivalent sample freguency on each channel
Eguivalent sampling freguency Vertical resolution
8 bits
Registration length
125k samples per channel
Acguisition modes
Sampling, Peak detection and Averaged
Other features Monochrome LCD screen for models IDS 706,710& 720.
Probe calibration output.
Colour LCD screen for models IDS 806,810& 820.
Input coupling
FFT transformed from the captured signal.
| Squared wave; IKHz ±5; 2Vpp ±3
Input impedance
lMfl±3%//25pF AC;DC,GND
Input voltage
400Vpeak max (DC+AC)
Screen "Go-No Go" mode to compare a measured wave form with another stored in memory. Automatic measurements б-digit integrated frequency meter Reading and measurement with onscreen cursors. Probe calibration output. Electrical protection category: CAT II300V (400Vpeak AC max.)
5,7"with 8 x 10 or 8 x 12 divisions Vpp, Vamp, Vavg, Vrms, Vhi, Vlo, Vmax Vmin Freq., Period, Rise and fall time, positive and negative width, work cycle
ДШШ
Cursors Memory storage
15 positions for equipment configurations, 2 positions for wave form diagram
Connection port
USB connection, RS-232 and SubO printer port
Size (Length x Width, x Depth):
310x142x254mm
Codes
Weight: 4.1 kg Power: 100-240 V AC -.47-63 Hz (automatic selection)
I Model
RSCode
IDS 706 Oscilloscope
514-4874
Power consumption: 45W maximum
IDS 806 Oscilloscope
514-4880
Operating temperature: 0-50"C~<80%H.R.
IDS 710 Oscilloscope
468-0975
IDS 810 Oscilloscope
468-0997
Accessories included: Power cables, instruction manual and probes.
IDS 720 Oscilloscope
468-0981
IDS 820 Oscilloscope
468-1007
(?) www.rs-components.com
j
ISO-TECH
IPS Analogue Series Analogue metered, regulated output power supplies which can be used as a constant voltage or current source. For applications which require greater than the maximum voltage or current, the units may be connected up in series or parallel.The IPS 3202 A also provides a fixed 5V ЗА output.
C"?3
lESEEnE
IPS 303 A
• * • /7 IPS 3202 A IPS 303 A
IPS 601A
IPS 1810 H
IPS 3202 A
1
No. of channels
2+ 1
1
2
Constant Voltage/Current Wort modes
Constant Voltage/Current
Independent
Series
Parallel1
DC output voltage
0-30V
0-60V
0-15V
2 x 0-30V
0-60V
0-30V
DC оJtput current
0-3A
0-1A
0-1OA
2 x 0-2A
0-2A
0-4V
Network adjustment to cte voltage
<0.01%+3mV
<0.01%+3mV
<0.01%+3mV
Charge adjustment to cte voltage
<0.01%+3mV
<0.02%+5mV
<0.01%+3mV
Network adjustment to cte current
<0.2%+3mA
<0.2%+3mA
<0.2%+3mA
Charge adjustment to cte current
<0.2%+3mA
<0.2%+3mA
Analogue. Class 2.5 Voltmeter and Ammeter
Meter type and class Meter size
60x80 mm c/u
50x50 mm c/u
<0.2%+3mA Analogue. Class 2.5 2 xVoltmeter & 2x Ammeter 50x50 mm c/u
Trai king option poss tie in Parallel mode 2 Third cte voltage output channel available у 5 ± 0.2S V d.c. & ЗА (network adj: <5mV, network charge: <10mV, ripple: <2mV rms)
Other features IPS 303 A
IPS 601 A
IPS 3202 A 1
Ripple and noise
<0.5mV rms
<1mVrms
Temperature coefficient
300ppm/°C
Recovery time
<100uS
Ripple current
<3mArms
Cte current
Insulation between chassis and output terminal
20MO or higher
Insulation between chassis and power cable
30MO or higher
Protection Output power
120Wmax.
390W max.
Gross and fine voltage and current adjustment controls. Ability t o connect various units in series or in parallel. Voltage and current remote control (only IPS 303 & 601). Size (Length x Width x Depth): IPS 303 A & 6 0 1 A: 1 2 8 x 1 4 5 x 2 8 5 m m IPS 1810 H & 3202 A: 255 x 145 x 335 m m
Overload and inverse polarity protection. Manufactured according to IEC 348 standard 160Wmax.
Switch technology power supplies. High stability and low ripple.
Switch power supply
Technology
Cte voltage.
IPS 1810 H
320Wmax.
Weight: IPS 303 A: 5kg IPS 601 A: 4 kg IPS 1810 H & 3202 A: 11.5 kg Power: 115-230V AC ±10%, 50/60HZ Operating temperature: 0-40°C ~ < 8 0 % R.H.
Model
RSCode
IPS 303 A Power supply
201-3424
IPS 601 A Power supply
201-3446
IPS 1810 H Power supply
204-713
IPS 3202 A Power supply
211-9948
ISO-TECH
Accessories included: Power cables a n d instruction manual.
IPS DIGITAL Series Rugged, high specification, single output power supplies for industrial and educational use. They can be used in constant voltage or current source and feature course and fine controls for current and voltage setting.
0,0*0,0 W
--••• « *. fflBSHm^Mto№>
IPS 3 0 0 D D
••'••"^
• • • IPS 1603D
•
IPS 303 DD
IPS 1820 D
IPS 361OD
IPS 606 D
IPS 1603D
0-60V
•
1
No. of channels Work modes
Constant Voltage/Current
DC output voltage
0-60V
0-18V
0-36V
0-60V
DC output current
0-3A
0-20A
0-10A
0 6A
0-3A
Network adjustment to cte voltage
<0.01%+3mV
<5mV
<0.01%+3mV
Charge adjustment to cte voltage
<0.01%+3mV
<5mV
<0.02%+5mV
Network adjustment to cte current
<0.2%+3mA
<3mA
<0.2%+3mA
Charge adjustment to cte current
<0.2%+3mA
<3mA
<0.2%+3mA
Display
Two Ш digit LED displays'
Display accuracy
+(0.5% of the measurement + 2 digits)
' One display represents the voltage and another the current
Specifications Switch technology power supplies.
IPS 303 DD
High stability and low ripple.
Ripple and noise
Gross and fine voltage and current adjustment controls.
Cte voltage
Ability to connect various units in series or in parallel.
Cte current
Size (Length x Width, x Depth): IPS 303 DD, 1820 D, 3610 D & 606 D: 128x145x285 mm IPS 1603:255x145x335 mm Weight: IPS 1820 D, 3610 D & 606 D: 3.3 kg IPS 303 DD: 5 kg IPS 16030:11.5 kg
IPS 1820 D
IPS 3610 D
IPS 606 D
<0.5mVrms
Temp, coefficient
<300ppm/°C
<100ppm/°C
Recovery Time
<100pS
<;500uS
Ripple current
<3mA rms
Output chassis-terminal insulation
< 10mA rms
<5mArms
IPS 1603 0 \ <1mVrms <300ppm/"C <100pS
<3mArms
<3mArms
>20MQ or higher
Power chassis-cable >30MO or higher
insulation Output power
160Wmax.
500Wmax.
360Wmax.
Power: 115-230V AC ±10%, 50/60Hz Operating temperature: 0-40°C ~ <80% R.H.
Model
RSCode
Accessories included: Power cables and instruction manual.
IPS 303 DD Power supply
325-6004
(g) www.rs-components.com
IPS 1603 D Power supply
204-729
IPS 1820 D Power supply
357-0760
IPS 3610 D Power supply
357-0776
IPS 606 D Power supply
357-0782
ISO-TECH
IPS DIGITAL Series One, two, three and four output, linear power supplies with LED displays and wide input voltage range. All benefit from low ripple and noise, overload and reverse polarity protection, and can be used as a constant voltage or current source.
IPS 2 3 0 3 / 3 3 0 3 / 4 3 0 3
IPS 1820
IPS 1820
IPS 2303 DD
IPS 2303
IPS 3303
IPS 4303
1
2-Й3
3
2+1
2+1+14
X
Independent/Series/Parallel
No. of outputs Work modes
I
Constant Voltage/Current
Synchronization of the supplies
Independent / Series / Parallel
DC output voltage1
0-18V
2xO-30V
0-60V
0-30V
2 x 0-30V
0-60V
0 30V
DC output current'
0-20A
2xO-3A
0 ЗА
0-6A
2X0-3A
0-6A
0-3A
Network adjustment to cte voltage
<0.01%+3mV
<0.01%+3mV
<0.01%+3mV
Charge adjustment to cte voltage
<0.01%+5mV
<0.01%+3mV
<0.01%+3mV
Netwoik adjustment to cte current
<0.2%+3mA
<0.2%+3mA
<0.2%+3mA
Charge adjustment to cte current
<0.2%+5mA
<0.2%+3mA
<0.2%+3mA 4 Displays (3 digit LEDs)2
2 displays (УА dig. LED)
Display Display accuracy
±(0.5% of the measurement + 2 digits) 3
Third 5V and ЗА additional fixed supply "Third 2.2-5.2V & 1A fixed supply and a fourth 8-15V & 1A additional supply
' Independent / Series / Parallel, except in IPS 1820 ' T w o displays represent the voltage and current of one supply and the other t w o the same for another
Specifications IPS 1820
Cte voltage
IPS 2303 DD
Ripple and noise Temp, coefficient
<300ppm/°C
Ripple current
<5mArms
IPS 1820 & 2303 DD: Switch technology power sources.
IPS 4303 1
IPS 2303,3303 & 4303: Straight-line technology power sources. High stability and low ripple.
<3mArms
Output chassis terminal insulation
Gross and fine voltage and current adjustment controls.
>20MQ or higher >30Mfi or higher
Power chassis- able insulation Output power
IPS 3303
<100pS
Recovery Time Ctecuirent
IPS 2303 <1mVrms
650Wmax.
420W max.
350W max.
420W max.
Size (Length x Width, x Depth): IPS 1820:255 x 1 4 5 x 4 2 0 m m IPS 2303 DD: 2 5 5 x 1 4 5 x 3 4 6 m m IPS 2303,3303 & 4303:255 x 145 x 265 m m
420W max.
Weight: IPS 1820:18.5 kg IPS 2303 DD: 11.5 kg IPS 2303,3303 & 4303:7 kg
Codes
]
Power: 115-230V AC ±10%, 50/60Hz Operating temperature: 0-40°C ~ <80% R.H.
1 Model IPS 1820 Power supply (high current)
RSCode 513-4962
IPS 2303 DD Power supply
325-6010
IPS 2303 Power supply
446-1645
IPS 3303 Power supply
446-1639
IPS 4303 Power supply
446-1623
ISO-TECH
1
Accessories included: Power cables and instruction manual.
IPS PROGRAMMABLE Series Programmable, switch mode power supplies with backlit LCD displays built to the latest technological standards. The built-in RS-232 interface (opto-isolated) provides easy connection to download data to a PC,
l*»OJTECH ZZZZ! nan (-;:*
4я^ещш#ЩтгЩ№''^*®"'"9*%
IPS 3 2 0 2
I
IPS 405
IPS 603
IPS 3202
IPS 2010
•
3
1
No. of channels Output
Scale
0-40V
0-60V
0-20V
current
Program and measurement resolution
10mV
20mV
10mV
10mV
DC
Program and measurement accuracy
±(0.O5%+3)
±(0.05%+4)
±(0.05%+3)
±(0.05%+20mV)
Output
Scale
0-5A
0-3.5A
0-10A
0-2A x 2 + 0-5A x 1
current
Program and measurement resolution
2mA
2mA
5mA
1mA
DC
Program and measurement accuracy
±(0.1%+5)
±(0.1%+5)
±(0.3%+10)
±(0.1%+5mA)
0-32V x 2 + 0-6V x 1
Network adjustment to cte voltage
<10mV
<3mV
Charge adjustment to cte voltage
<5mV
<3mV
Network adjustment to cte current
<0.05%
<3mA
Charge adjustment to cte current
<0.05%
<3mA
Voltage ripple
<20mV rms
<1mVrms
Current ripple
< 10mA rms
<3mA rms
Other features Power supplies controlled by microprocessor and interface for programming.
IPS 405 Technology
High stability and l o w ripple. Control through keyboard and circular dial command. High efficiency and power density.
Screen
Protection
Network connection
Accessories included: Power cable, test lead set and instruction manual.
d) www.rs-components.com
IPS 3202
Multi-line LCD screen with backlight RS-232 0VP,0CP,0TP&0PP 200W max.
360W max.
115-230V AC ±10%, 50/60HZ
Work temp.
Weight: IPS 405,603 & 2010:4 kg IPS 3202:10 kg
IPS 2010
Switch power supply
PC connection
Output power Size (Length x W i d t h , x Depth): IPS 405,603 & 2010:225 x 100 x 305 m m IPS 3 2 0 2 : 2 3 0 x 1 4 0 x 3 8 0 m m
IPS 603
0-40°C
Codes
'
Model
RSCode
IPS 405 Power supply
446-1601
IPS 603 Power supply
446-1594
IPS 2010 Power supply
446-1617
IPS 3202 Power supply
513-4653
94J
\
IPS PROGRAMMABLE Series • •
IPS 2035 / 3620
Four highly efficient, high power density programmable power supplies, microprocessor controlled for easy connection, via the built-in RS-232 interface, to a PC for automatic testing or control purposes. The current and voltage outputs are controlled by a 12-bit D/A converter which provides high resolution, accuracy and repeatability.
TUCK 5SKK"
ШШ
IPS 2050 / 3630
1
IPS 2035
IPS 3620
No. of channels
IPS 2050
IPS 3630
2-20V
3-36V
0 50A
0-30A
1
Output
Scale
voltage
Program and measurement resolution
2-20V
DC
Program and measurement accuracy
3-36V 10mV ±(0.05%+25mV)
0-35A
0-20A
Output
Scale
current
Program and measurement resolution
10mA
20mA
DC
Program and measurement accuracy
+(0.05%+30mA)
±(0.05%+60mA) 0.05%+5mV
Network adjustment to cte voltage
0.1%+5mV
Charge adjustment to cte voltage Network adjustment to cte current
0.2%+10mA
Charge adjustment to cte current
0.2%+10mA
0.2%+15mA 0.2%+15mA 10-20mVrms
Voltage ripple 0.2% + 20mA rms
Current ripple
0.2% + 40mA rms
Other features IPS 2035 Screen
IPS 3620
IPS 2050
PC connection
<150ms
Recovery time
^2ms
Network connection Work temp.
High stability and low ripple.
RS-232 0VP,0CP,0HP and input current
Response time
Configuration through keyboard and circular dial command.
WOOWmax.
700W max.
Switch technology power supplies. Interface for programming.
Multi-line LCD screen with backlight
Protection
Output power
IPS 3630
Wide voltage and power range and high power factor (PF). Ability to connect various units in series or in parallel.
115-230V AC ±10%, 50/60HZ 0-40°C
ON/OFF key to activate and deactivate outputs. Size (Length x Width, x Depth): IPS 2035 & 3620:188 x 141 x 388 m m IPS 2050 & 3630:268 x 141 x 388 m m
1 Model
RSCode
IPS 2035 Power supply
513-4978
IPS 3620 Power supply
513-5000
IPS 2050 Power supply
513-4984
IPS 3630 Power supply
513-5016
ISO-TECH
W e i g h t : IPS 2035 & 3620:6.2 kg IPS 2050 & 3630:9.3 kg Accessories included: Power cable a n d instruction manual.
•
n generators GFG 2000 Series These instruments are Synthesized Function Generators that apply the Direct Digital Synthesis technique to generate an accurate and stable frequency with high resolution. The signal source generates sine, square, triangular, pulse, A M , FM and sweep waveforms.
GFG 2004
I
GFG 2004
GFG2007
GFG2110
4MHz
7MHz
10MHz
Configuration memory storage
О
О
Frequency sweep
О
О
AM modulation
О
О
FM modulation
О
О
Internal/external modulation control
О
О
Frequency meter
О
О
Maximum frequency
•
Sine signal Squared signal Triangular signal TTL/CMOS specific output DC offset Work cycle control
Specifications High-intensity cathode ray tube with acceleration high voltage. High-stability and low-drift wave form representation. Probe calibration output. Size (Length x Width, x Depth): 107 x266 x293 mm
GFG 2004
GFG 2007
Resolution
±20 ppm
Stability
±20 ppm
Accuracy
±20 ppm
Output voltage amplitude
GFG2110
lOVpp
Output impedance
SOD
Weight: 3.1 kg (GFG 2004,2007) 3.2 kg (GFG 2110)
TTL/CMOS output
>3Vpp/4-15Vpp
Power:
Frequency scale
100-240 AC ±10%~50/60Hz
Power
10
Memory positions
-
5Hz to 150MHz 115/230 AC ±15%
Power consumption: 60W maximum Operating temperature: 0-40° С ~ <85% HR Accessories included: Power cables and instruction manual.
(g) www.rs-components.com
Codes
|
Model
RSCode
GPG 2004 Function generator
513-8510
GPG 2007 Function generator
513-8526
GPG 2110 Function generator
513-8532
ISO-TECH
Function generators GFG 8200 Series This series of function generators are stable low distortion instruments with logarithmic and linear sweep capabilities, together with a built-in frequency counter. They are suitable for audio response testing, vibration testing, servo system evaluation and ultra sound applications etc.
Щ
GFG 8216
GFG 8219
3MHz
3MHz
Maximum frequency
GFG 8255 5MHz
Sine signal Squared signal Triangular signal Sawtooth signal (ramp) TTL pulse-train signal TTL/CMOS specific output Frequency sweep External voltage control frequency (VCF) Work cycle control DC offset
о о о о •
AM modulation FM modulation Internal/external modulation control GVC output for synchronization Frequency meter
Specifications GFG 8216 GFG 8219 GFG 8255 Output voltage amplitude
>10Vpp
Output impedance
500 ±10
TTL/CMOS output
>3Vpp/4-15Vpp
VCF input amplitude VCF input impedance Frequency meter measurement scale
10кП±10
Frequency meter input impedance
1MO//150pF
Power
Dual time base with variable retention and delayed sweep. Work configuration memory storage.
5Hz to 150MHz <45mV rms
GCV output
Reading and measurement with cursors on TRC screen.
0-10V
Frequency meter sensitivity
High-stability and low-drift wave form representation.
Work configuration block. Probe calibration output. Size (Length x Width, x Depth):
0-2V 251 x 9 1 x 2 9 1 m m
115/230 AC±15%
Weight: 2.2 kg
I Model
IS Cod*
GFG 8216 Function generator
376-0200
GFG 8219 Function generator
398-5364
GFG 8255 Function generator
376-0216
ISO-TECH
Operating temperature: 0-40°C ~ <85% HR Accessories included: Power cables and instruction manual.
•
ILC 421 hand-held voltage and current calibrator A low cost, battery powered c o m p o n e n t tester w i t h а У/г digit LCD display, ideal for field service and production environments. - Tests batteries, diodes, LEDs, transistors and SCRs - Measures resistance and capacitance
- Overload protection - Low battery indication
Specifications The calibrator powers charges up to 500П 3%-digit, 2000-count LCD display
Current source Scale
Sample time: approx. 0.4 seconds Size (Height x Width, x Depth):
185x78x38 mm
Voltage source
0-19.99mA
0-24mA
-199.9-199mV
Resolution
0.01mA
0.1mA
0.1mV
Accuracy'
±(0.25%+1)
±(0.5%+ 1)
Weight: 265 g
Current measurement
±(0.25%+ 1) Power and loop measurement2
Use conditions: 0-50°C ~ Relative humidity less than 80%
Scale
0-19.99mA
0-24mA
0-19.99mA
Resolution
0.01mA
0.1mA
0.01mA
0.1mA
Power: Alkaline or similar type 9V PP3 battery
Accuracy1
±(0.25%+ 1)
±(0.5%+ 1)
±(0.25%+ 1)
±(0.5%+ 1)
Accessories included: Test leads, alkaline battery and instruction manual.
1 1
0-24mA
Accuracy is indicated as ±{% of scale base f no. of counts) Provides 12V DC voltage at the loop and measures the current
ICT 76 component tester Easy and economical low-cost tester that will be very useful in your assistance and maintenance tasks because of its small size and accuracy. With the ICT 76, you can easily measure the value of resistances and condensers, test the battery charge and test diodes, LEDs, transistors and SCRs.. - hFE and ICEO current measurement in transistors. - Direct voltage measurement in LEDs. - Direct voltage measurement in diodes. - Validity or defect test for SCRs. - Battery charge test.
Specifications З'/г", 1999-count LCD display
Resistance
Capacity
Size (Length x Width, x Depth): 84x31 x 174 mm
Maximum value
20M0.
20mF
Resolution
0.10
O.lpF
Weight: 330 g
Accuracy1
±(0.75%+ 4)
±(0.5%+1)
Power: One 9V battery (alkaline batteries recommended)
Accuracy is indicated as ±(% of reading + no. of counts)
Typical battery life: 200 hours Accessories included: Test cables, alkaline battery and instruction manual.
® www.rs-components.com
ISO-TECH
LCR 819 laboratory component meter The ISO-TECH LCR819 is an automatic, user programmable instrument which provides high reliability and precision for measuring a wide variety of impedance parameters. You can measure: inductance, capacitance, resistance, dissipation and quality factor. Measured results resolution is displayed on the backlit LCD along with control status and parameters of the settings.
Specifications Test frequency
12Hz ~100kHz {503 steps)
Bask accuracy
0.05%
Resistance measurement scale
0.00001Q-99999kQ
Capacity measurement scale
0.00001 pF-99999uF
Inductance measurement scale
0.00001mH-99999H
Quality factor Test modes
0.0000-9999 R/Q; C/D;C/R;L/Q
RS-232 communication port. Backlit 240 x 128 pixel dot matrix LCD display. 100 memory positions to save/recall setup state. Size (Width x Height x Depth): 330 x149 x437 mm Weight: 5.5 kg Operating temperature: 0-50°C Power: 230V ± 10%, 50/60Hz. Accessories included: Test leads, current adaptor, CD-ROM with RS-232 connection software and instruction manual.
IFG 100 tone generator The small and useful IFG 100 tone generator is designed t o provide you w i t h accurate and stable variable frequency tone for your acoustic tests. A low-distortion oscillator inside the generator is able to generate highly accurate and reliable sine and squared waves covering a frequency range of 20Hz t o 150kHz. Because it is so small, you can easily carry it and always have precise and accurate measurements.
Frequency range
20Hz- 150kHz ±3%20Hztol00kHz
Frequency accuracy Output amplitude (sine) Output amplitude (square) Output impedance Synchronisation output
IFG 100 Generator
ISO-TECH
±5% 100kHz to 150kHz 1.2Vrmsmax. 8Vpp max. 6000 !.2Vrms:Zout1kQ
205-968
20 dB output attenuator Size (Length x Width, x Depth): 150x80x21 mm Weight: 200 g Power: One 9V alkaline battery Typical battery life: 50 hours Operating temperature: 0-50°C ~ 80% R.H. Accessories included: Batteries and instruction manual.
Acoustic measurement NDM Series personal noise dosimeters Two personal noise dosimeters for evaluating the noise conditions in the working environment by measuring the accumulated noise exposure. They are designed for carrying out unsupervised noise exposure assessments of personnel moving between areas o f varying noise levels. The results obtained from such assessments can be used to determine whether action needs to be taken t o reduce noise exposure, in accordance w i t h the Health & Safety at Work Act and Noise at Work Regulations 1989. The NDM1355 additional features:• 5 event data storage, each event captures:% DOSE, 8 hour % DOSE, PEAK & RMS flags, Exposure T i m e , Peak Time & Peak event duration • RS-232 interface • Real time clock.
Specifications Fast (F) or slow (S) time constant.
ANSIS1.25-1991 A weighting
Standard applied
W electret condenser microphone with 77.5 cm cable
Noise DOSE range
0.01-9999%
Criteria level (selectable)
80/84/85/90dBA
Size (Length x Width, x Depth):
Measurement threshold level
70-90dBA1dBstep
106x60x34 mm
Measurement range
70-140dBA
Weight: 350g
Exchange rate (EA)
3/4/5/6dBA
Power: 4 AAA alkaline batteries
Accuracy
+1.5 dBA
Typical battery life: 40 hours Operating temperature: 0-50°C~ 10-75% R.H. Accessories included: Carrying case, screwdriver, batteries and instruction manual. Model 1355 also includes the connection software and Windows application, as well as an RS-232 connection cable and 9- to 25-pin D connector adaptor.
Г
Codes
|
1 Model
RSCode
NOM1354 Dosimeter
388-0893
NDM 1355 Dosimeter
388-0900
:W:-::*
SLC 1356 sound calibrator Par The SLC sound calibrator makes it possible for you t o have a perfectly calibrated set of sound meters and test instruments able t o take accurate a n d reliable acoustic measurements.
у
The socket accepts 1" diameter microphones and also includes adaptors for W and Vi" microphones so you can use it w i t h any standard microphone model used in acoustical studies.
Specifications The specifications to the left are calculated with the following reference conditions: 20°C, 68% R.H., 1.013 mbars
Standards
ANSI S1.40 -1984 / !EC 9421988 Class 2
Output sound pressure level
94 dB/114 dB (Reference 20pPa)
Output frequency
Size (Length x Width x Depth):
1000Hz ±4%
Temperature coefficient
103x63x54 mm
0.015 dB
<3%
Total harmonic distortion
Weight: 200 g
Accuracy
Power: One 9V alkaline battery
±0.5 dB
Typical battery life: 50 hours Operating temperature: -10-60°C~ 10-90% R.H. Accessories included: Carrying case, W & !4* microphone adaptors, batteries and instruction manual.
(g) www.rs-components.com
Г
Codes
1 Model SLC 1356 Calibrator
| RSCode 388-0922
ISO-TECH
Acoustic measurement 1325N sound level meter Designed to meet the requirements of safety, health and industrial safety officers and sound level control, the 1352N features data logging and time weighting selection facilities, making it the ideal instrument for spot check or long term monitoring. Complies with: IEC61672-1: 2003 Class 2; IEC60651:1979Type 2; ANSI S1.4:1983Type 2 • Fast and Slow time weightings. • A and С frequency weightings. • Over and Under limits alarm setting facility
#
0 MF шг
• MAX hold function • Storage of up to 32000 measurement records. • Real time clock (date& time) • RS-232 serial port for downloading records to a computer or real t i m e analysis to a computer. • Analogue o u t p u t for connection suitable for use w i t h a frequency analyzer, level recorder, FFT analyzer, and graphic recorders.
ications Weight: 31 Og
Standard applied
Power: 4 x 1.5V AA batteries or external 5-12VDC@10mA
Noise DOSE range
ANSI SI.25-1991 A weighting 0.01-9999%
Criteria level (selectable)
80/84/85/90dBA
Typical battery life: 50 hours
Measurement threshold level
70-90dBA1dBstep
Operating temperature: 10°C to 50°C.
Measurement range
70-140dBA
Accessories included: Instruction manual, batteries, adjustment screwdriver, PC software, windscreen, RS-232 connecting cable, 3.5mm plug, Carrying case.
Exchange rate(EA)
3/4/5/6dBA ±1.5 dBA
Accuracy
Codes
]
• Model
RSCode
1352N Sound level meter
617-0565
Light measurement 1332 digital light meter Compact and lightweight, the ISO-TECH 1332 digital light meter, with a measurement range up to 200,000 lux, is an economical instrument for monitoring light intensity levels in a wide variety of applications, and the flexible coiled lead allows you to position the sensor just where you want it.
Spectral response according to CIE curve.
Measurement range
Cosine correction for light with angular incidence.
Resolution
Analogue output for data recorder
Accuracy Measurement rate
Size (Length x Width, x Depth): Lux meter: 135 x 72 x 33 mm Sensor: 100x60x27 mm
Display
Weight: 250g
Power
Output for data recorder
20/200/2,000/20,000/200,000 lux 0.1 lux ±(3% of reading +0.5% of full scale) approx. 2 times per second 2000 count LCD display 2 V DC at full scale One 9V battery
Operating temperature: 0-40°C ~ <70% R.H. Accessories included: Carrying case, 9V battery and instruction manual. 1332 Lux meter
ISO-TECH
506-9644
|
Light measurement & 1337 digital light meters These t w o high specification instruments w i t h large easy to read LCD displays and wide measurement ranges are ideal for assessing that light levels in the workplace, hospitals and offices meet the guidelines of health and safety regulations. The ISO-TECH 1335 has the benefit of a 4000 count display w i t h instant bargraph indication.
Specifications Spectral response according to CIE curve. Cosine correction for light with angular incidence. On-screen data retention function (HOLD).
Measurement range
0.01 lux
Accuracy
±(3% of reading + 0.5% of full scale)
Repeatability
Maximum and minimum measurement record mode.
Temperature factor
Size (Length x Width, x Depth):
150x72x35 mm
LUX 1335 40/400/4,000/40,000/200,000 lux
Resolution
Measurement peak retention function (PEAK).
Ability to measure in lux or foot-candles.
LUX 1337 20/200/2,000/20,000 lux
±2% ±0.1%/°C 2.5 times/sec
Measurement rate
1.3 times/sec
Display
4000-count LCD display with analogue-type bar graph
Power
Batteries: 6 AAA 1.5V alkaline batteries 400 hours
Typical battery life
Weight: 320g Operating temperature: 0-40°C ~ <80% R.H. Accessories included: Carrying case and instruction manual.
1 Model
RSCode
LUX 1337 Lux meter
459-7788
LUX 1335 Lux meter
442-0357
Electromagnetic field measurement These EMF testers are designed to provide a quick, reliable and easy way to measure electromagnetic field radiation around power lines, home appliances and industrial devices. Both testers display microTesla and milli-Gauss readings simultaneously, and with the EMF 1394 you have the benefit of an RS-232 interface for downloading data to a PC. • Data recording of up to 999 readings. • On-screen data retention function (HOLD). • Measurement peak retention function (PEAK).
Specifications Measurement range
Size (Length x Width x Depth):
200-2000 milli Gauss 2/20/20 micro Tesla
155x72x35 mm
Resolution
0,01/0,1/1 milli Gauss 0,001/0,01/0,1 microTesIa
Band width
30Hz to 2000Hz
Basic accuracy
±(3% + 3 digits)
Sample time
0.5s
1 Model
Power: 6 AAA alkaline batteries Typical battery life: 100 hours Operating temperature: 0-50°C ~ <80% R.H. Accessories included: Batteries and instruction manual. Model 1394 also includes the connection software and Windows application, as well as an RS-232 connection cable.
RSCode
EMF 1393 Meter
459-7738
EMF 1394 Meter
459-7744
(?) w w w . r s - c o m p o n e n t s . c o m
Weight: 165g
ISO-TECH
It's easy to order, simply email, fax or cal your local RS Distributor for a quotation
ISO-TECH Distributed exclusively by:
www.rs-components.com
Or log onto www.rs-components.com and click on your local distributor site.
T e r m s a n d C o n d i t i o n s : Customers shall deal direct with RS Components Limited's appointed distributor resale of products and services in this catalogue and the customer should therefore contact the distributor directly last. This issue is valid until 30th September 2007.
RS, Q3 ISO-TECH,
are trademarks of RS Components Limited, e An Electrocomponents Company.
levant territory. The distributor will be solely responsible for the are any issues in relation to such products or services. Offers are available while stocks
ГУРосНИИИТиАП
Ассоциация МВТК
Федеральный информационный фонд отечественных и иностранных каталогов на промышленную продукцию
Каталог был представлен на выставке
«Электроника и транспорт - 2007»
Каталог включен в базу данных «Федерального информационного фонда отечественных и иностранных каталогов на промышленную продукцию» Россия, 105679, Москва, Измайловское шоссе, 44, Тел./факс (095)366-5200, 366-7008, 365-5445. e-mail:;
[email protected], www.flpk.ru
Электронная копия издания изготовлена с целью её включения в базы данных Федерального информационного фонда отечественных и иностранных каталогов на промышленную продукцию, которые формируются в соответствии с Постановлением Правительства РФ от 24 июля 1997 г. № 950 и Постановлением Правительства РФ от 31 декабря 1999 г. № 2172-р и зарегистрированы Комитетом по политике информатизации при Президенте РФ под №№ 39-50.
2007 год
