It 5600

Transcript

Product Information IT 5600 and 5620/2020 Bar Code Hand- Held Scanner Hand- Held Line Bar Code Hand- Held Scanner IT 5600 Bar Code Hand- Held Scanner Hand- Held Line IT 5600 – Adaptus TM Imaging Technology reads up to 1.1 m Your benefits: The IT 5600 is setting a new standard for identification of linear bar codes. Using the newest generation of Linear Imaging Technology the IT 5600 is a superb replacement for laser scanners with a reading distance up to 1.1 m. This Linear Imager, as a result of integrated illumination, has a brighter, wider and sharper aiming line than conventional standard laser scanners. This clearly facilitates aiming at the bar code. Many applications benefit from greater reading range. Bar codes on objects, which are difficult to access, are easy to identify now. As a result of a high scanning frequency with 270 Hz and intelligent algorithms the IT 5600 has a high performance for multiple reads or poor quality barcodes. The IT 5600 has no moving parts, the housing is mounted with steel screws and is protected against impact through rubber bumpers. These measures allow highest robustness and stability. The universally designed data transmission interface allows any connections of the IT 5600 to the most common PCs or terminals. The hand-held scanner transmits the decoded information to a terminal or host over keyboard wedge/emulation, RS 232, USB or wand emulation for further processing. Its ergonomic design, robustness, fast and reliable identification of linear bar codes make the IT 5600 the ideal choice for daily applications in offices and for light industrial environment. ■ Fast and reliable bar code identification ■ Identification of all popular linear bar codes ■ Connection to various interfaces ■ Easy-to-use due to configuration via bar codes ■ Setup software for easy and clear programming The IT 5600 at a glance: ■ Reading distance up to 1.1 m ■ Optical and acoustic good read signal ■ Manual trigger ■ Flash Memory for software update ■ Robust, compact housing ■ Ergonomic design ■ 5 years warranty IT 5620/2020 Bar Code Hand- Held Scanner Hand- Held- Line IT 5620/2020 – more liberty of action through cordless Bluetooth TM technology The most outstanding feature of this hand held scanner IT 5620 is the cordless data transmission via BluetoothTM. After successfully reading a bar code the decoded data is transmitted over a cordless connection to the paired IT 2020 base station. The automatic RF connection allows transmissions of up to 10 m. Beyond this operating range the scanner automatically makes use of a so-called batch function. By using this function it is possible to buffer up to 500, 12digit bar codes within the scanner. After re-entering the operating range, the stored data is transmitted to the base unit, following the FIFO-method. Through this the roaming radius of the operator increases dramatically. Additionally safety conditions are improved because accidents as a result of cables becoming entangled in equipment and machinery can be eliminated. The base station IT 2020 optionally supports up to 7 cordless scanners IT 5620 simultaneously – each can be programmed to solve various application tasks. The universally designed data transmission interface allows the IT 2020 to be connected to most common PCs or terminals. The base station transmits the decoded information to a terminal or host over keyboard wedge/emulation, RS 232, USB or wand emulation for further processing. Using BluetoothTM technology the IT 5620 allows direct communication with other BluetoothTM devices. Then a separate charging station ensures that the scanners can be recharged when not in use. For RF communication between the hand-held scanner IT 5620 and the base station IT 2020 a very robust data transmission based on frequency hopping at the 2.4 GHz ISM band is used. Interference between WLAN, other BluetoothTM or 433/908 MHz systems can also be excluded. The power supply of the hand-held scanner IT 5620 is based on a lithiumion battery pack, which allows a long operating time without memory effects. The base station IT 2020 works simultaneously as charging station. The innovative combination of BluetoothTM RF technology, ergonomic design, robustness, as well as fast and reliable identification of linear bar codes makes the IT 5620 the ideal choice for daily applications in offices, warehouses and logistics or for light industrial environments. Your benefits: ■ Increased mobility of the operator ■ Presentation and Hand-held scanner in one ■ License-free RF system delivers fast and reliable communication ■ Lithium-Ion battery pack without memory effect ■ Optionally up to 7 scanners communicate with one base station ■ Setup software for easy and clear programming The IT 5620/2020 at a glance: ■ 10 m RF operating radius ■ Buffering of bar codes beyond operating range ■ 2.4 GHz radio frequency with frequency hopping acc. to BluetoothTM V1.2 ■ Robust, compact housing ■ 3 years warranty 8 010 562/11-2004 · SGF/SM . Printed in Germany (11-2004) • Subject to change without prior notice • The specified product features and technical data do not represent any guarantee • 05 Pregr int47 Te chnical Dat a Type IT 5600 Product Light source Ambient light compatibility Scan-/Decoding frequency Reading distance /resolution Reading width Minimum resolution Code types Batch function Optical indicators Hand-Held Linear Imager Visible red light (λ = 630 nm) max. 70,000 lux 270 Hz 25 ... 910 mm/0.51 mm; 64 ... 1110 mm/1.4 mm 254 mm at 419 mm reading distance 0.127 mm All popular bar codes 500 codes (UPC) with 12 digits LED for Good read LED for Good read, low battery power and RF communication status IT 5620 Base and charging station Acoustical indicators Beeper for Good read Beeper for state of readiness RF- and data interface - Keyboard wedge for PCs and terminals - Keyboard emulation - Wand emulation, optional Laser-Out (HHLC) - RS 232 (TTL-level), optional RS 232 True - USB - BluetoothTM V1.2, class 2 (IT 5620 only) - BluetoothTM V1.2, class 2 - 2.4 ... 2.4835 GHz (ISM band) - Frequency hopping - Data transer rate 720 KBit/s - 10 m RF operating radius - Batch function to expand operating radius Operating voltage Current consumption DC 4.5 V ... 14 V at DC 5 V: 235 mA (Standby 68 mA, Switch-on 350 mA) at DC 12 V: 142 mA (Standby 49 mA) DC 4.5 V ... 12 V at DC 9 V: 750 mA (max. charging) Housing Enclosure rate EMC test Mechanical shock Vibration MTBF Weight Dimensions Temperature (operating/storage) Rel. Humidity Exchangeable battery pack Polycarbonate UL 94V0 IP 41 EN 55022 Class B, EN 55024:1998, EN 61000-3-2, EN 61000-3-3, EN 60950 50 drops from 1.8 m to concrete Withstands 5g peak from 22 up to 300 Hz > 100.000 h (Ground-Benign acc. to MIL-HDBK-217F) approx. 185 g (without cable) 260 g (incl. battery pack) 157 mm x 135 mm x 81 mm 0 °C ... + 50 °C/– 40 °C ... + 60 °C 0 ... 95 %, non-condensing 1600 mAh capacity max. 20,000 scans max. 20 h (stand by) max. 12 h (heavy usage) max. 4 h charge time Beeper for Good read and RF communication status DC 3.6 V (Li-Ion battery pack) IT 2020 LED for data transmission, system and battery power status 50 drops form 1.2 m to concrete 205 g (without cable) 79 mm x 142 mm x 109 mm Tethered Order No. Product 6 028 175*) 6 028 177*) On request*) On request IT 5600SR 030 Hand-Held Linear Imager, RS 232 True IT 5600SR 050 Hand-Held Linear Imager, RS 232 TTL, wand emulation, keyboard wedge, USB IT 5600SR 000 Hand-Held Linear Imager, RS 232 TTL, HHLC Additional products such as interface cables for connection to various terminals and keyboards or power supply unit and other accessories Describtion Cordless Order No. Product Describtion 6 029 480*) IT 5620SR 0C0-0G00 Kit of IT 5620SR 0C0, IT 2020-5 and system manual 6 029 311 IT 5620SR 0C0 Hand-Held Linear Imager, BluetoothTM V1.2, incl. Lithium-Ion battery 6 029 312*) IT 2020-5 Base and charging station, BluetoothTM V1.2, RS 232 TTL, wand emulation, keyboard wedge, USB 6 029 317 Lithium-Ion battery pack (spare part) 6 029 319*) IT 2020-CB Charge station IT 5620 (for operations with aternative BluetoothTM devices) On request Additional products such as interface cables for connection to various terminals and keyboards or power supply unit and other accessories *) NOTE: For setting-up operation an interface cable and if necessary a power supply unit are additionally required. SICK AG • Auto Ident • Waldkirch/Reute • Germany • www.sick.com