Transcript
IT-H Series: Fixed, Platform-Based HDD/SSD Duplicator
Features
Operation:
• Stand-alone, FPGA-based operation (Non PC-based). Ultra-High Data Bandwidth Performance: • •
Speed transfers up to 18GB/min. (300MB/sec.) Dedicated bandwidth enables high-volume duplications without speed degradation. Read-Only Source Port: •
There are no options to disable this built-in feature and it is integrated with all UReach duplicators. 4 Copy Modes: •
Quick copy (Data & System): Supports Windows, Mac, and Linux.
•
All Partitions: Users can skip HPA or unknown partitions.
•
Whole HDD: Bit-by-bit copy mode which copies exactly like the master device.
•
Percentage Copy: Users can set percentages of capacity to be copied. 5 Sanitization Modes: Quick Erase, Full Erase, DoD Erase, DoD Erase+Compare, and Secure Erase.
www.ureach-usa.com Page 1 of 4
Compatibilities
Embedded controller is designed to support capacities over 18TB+. Constant improvement supports latest market-available devices. • • • •
Supports all brands of HDDs and SSDs. Supports GPT, MBR, and Advanced Formats. Supports 1.8”/2.5”/3.5” SATA HDDs and SSDs without adapter. Supports 2.5"/3.5” IDE, iVDR, eSATA, mSATA, Micro SATA, M.2 (NGFF), and CFast (Requires adapters).
Special Features
Customized Settings:
• Automatically disconnects hard drives below user-set threshold speed. • Allow users to set hard drive motor start and stop time. Real-Time PC Monitoring: •
Connection from the USB port to PC displays: writing speeds, operating durations, and completed percentages per port. Event Log Management: •
Records: operating durations, individual port copy progressions, connected hard drive models, capacities, serial numbers, and PASS or FAIL results.
• Log report files are generated through the USB port and are saved to USB devices. Anti-Tampering Log Report •
Any falsification can be detected to ensure the report is genuine.
Hardware Design The rail-guiding module design allows for quick device connections and disconnects. Modular-designed ports effectively reduces downtime and is cost-effective for long-term ownership.
www.ureach-usa.com Page 2 of 4
Specifications
Photos
Models
IT300H
IT700H
IT1500H
Targets
1:3
1:7
1:15
Buffers
Up to 128MB
256MB
512MB
Maximum Transfer
18GB/min. (300MB/sec.) *Actual performance is dependent on
Speed
HDD transfer speeds*
Capacity Operation Type Specifications
Supported Languages LCD Display LEDs Control Panel
Supports the latest market available capacity Designed support capability up-to 18TB+ Stand-alone, FPGA-based operation (Non PC-based) English or Japanese Backlit Monochrome LCD Display 3 LED Indicators per Port: Yellow (Power), Green (Pass), and Red (Fail) 4 Push Buttons(▲, ▼, OK, ESC) Quick Copy (Systems & Files Copy)
Copy Modes Features
All Partition Copy Whole HDD Copy Percentage Copy
Compare Function Sanitization Modes
Bit-by-bit data comparison Quick Erase, Full Erase, DoD Erase, DoD Erase+Compare, and Secure Erase
Skip Bad-Sectors
Set minimum acceptable bad sector quantity and lowest speed
Log Report
Monitor real-time recordings and Log Reports via PC-link
Special Features Management PC Monitoring
Anti-Tampering Log Report Real-Time status monitoring through PC
www.ureach-usa.com Page 3 of 4
Compatible Devices Compatible Devices (with required Compatibilities
adapter)
1.8"/2.5"/3.5” SATA HDDs and SSDs 2.5"/3.5” IDE, iVDR, eSATA, mSATA, Micro SATA, M.2 (NGFF), and CFast Quick Copy: FAT16/32/64, Windows (NTFS), Linux
Supported Formats
(Ext2/Ext3/Ext4), and Mac (HFS, HFS+,HFSX) Whole HDD Copy: All Formats, including proprietary formats
Supported O/S
All (Windows, Mac, Linux, and other stand-alone systems)
Power Supply
Universal Power: 115VAC or 230VAC, 50/60Hz
Working Temperature
5°C ~ 45°C (41°F ~ 113°F)
Hardware
Storage Temperature -20°C ~85°C (-4°F ~ 185°F)
Specifications
Working Humidity
20% ~ 80%
Storage Humidity
5% ~ 95%
Product Dimensions TBA Certifications
FCC, CE, RoHS
www.ureach-usa.com Page 4 of 4
