Preview only show first 10 pages with watermark. For full document please download

Item Number: Typical Data Sheet Description: Hardline Splicer, G003.

   EMBED

Share

Transcript

Item Number: G003-SPL April 28, 2011 - Rev.:00 ___________________________________________________________________________________ Description: Hardline Splicer, G003. TYPICAL DATA SHEET Electrical Frequency Range Impedance Return Loss Insertion Loss Inner Conductor Resistance Amp Rating Shielding Dielectric Strength Insulation Resistance CPD Specification 5 MHz – 3000 MHz 75 Ω Nominal ≥ 31 dB 5 MHz – 1000 MHz ≤ 0.1 dB 5 MHz – 1000 MHz ≤ 0.5 mΩ @ 1 A. ” 15 A @ 60 V. Minimum Class: A+ ≥ 3 KV ≥ 29.99 GΩ @ 500V DC -110 dBc Standard IEC 61169-1, 9.2.1.4 IEC 61169-1, 9.2.3 EN 50117 IEC 61169-1, 9.2.6 IEC 61169-1, 9.2.5 ANSI/SCTE 109 2005 Environmental Temperature range Operating Temperature range Installation Sealing test Corrosion Protection Red Dye Specification -30C to +75C -5C to +50C IPX8 – 1 meter / 24 hours Standard IEC 60529 ASTM B 117-94 ANSI/SCTE 60 Mechanical Pull Strength Specification Standard ANSI/SCTE 99 Specification NiSn (NITIN) plated Brass NiSn (NITIN) plated Brass NiSn (NITIN) plated Brass EPDM Polycarbonate, Polyethylene Standard ASTM B605 ASTM B605 ASTM B605 ≥ 150 kgf Material and Finish Housing Inner Conductor Compression Ring O’ring Insulators In order to continue to supply the best products, PPC reserves the right to change the products and specifications at any time without prior notice. PPC Denmark  Vaerkstedsvej 14, DK-4720 Praesto  Tel: +45 55 99 17 22  Fax: +45 55 99 27 22 E-mail: [email protected]  Website: www.ppc-online.com