Transcript
iw6 TDC
Product Description
The iw6 TDC is a full bandwidth in wall speaker system, using a 165mm (6.50") Tannoy Dual Concentric™ point source, constant directivity drive unit with an additional 25mm (1.00") Tannoy SuperTweeter™. Designed primarily for installation into standard stud partition wall systems, it may also be used in cavity wall installations constructed with standard thickness drywall as well as a wide range of other wall construction types with a surface thickness of up to 25mm (1.00”).
High power handling and 91dB efficiency ensure this compact unit is ideally suited to applications requiring the combination of premium sonic quality for music and speech reinforcement and exceptional reliability and intelligibility.
The 165mm (6.50") Tannoy Dual Concentric™ drive unit comprises a multi fibre paper pulp mid bass cone and a 25mm (1.00") ferrofluid cooled, titanium dome HF unit with neodymium magnet system. The mid-bass and tweeter sections of this constant directivity driver are coincidentally aligned to a true point source; ensuring a wide and controlled dispersion for optimum coverage; this while avoiding the massive loss of energy, in the vertical plane at the crossover frequency, inherent in two-way discrete designs.
The addition of a 25mm (1.00") titanium dome SuperTweeter™ extends the frequency bandwidth out to over 50kHz, further enhancing the already class leading, low distortion performance of the iw6 TDC with an exceptionally natural and open soundstage. The iw6 TDC is also equipped with dynamic high frequency protection.
The drivers and passive frequency dividing network are mounted in an injection moulded, paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material. The class leading performance is further enhanced by the inclusion of six self aligning, spring loaded clamps; allowing for quick install but also for simple removal or reorientation of the loudspeaker. The rigidity of the clamps and baffle combination crucially provides the acoustically optimum bond to the wall surface without risk of distortion to the baffle itself. Gold plated spring loaded terminals are provided for ease of installation and a steel back can is available as an optional installation accessory.
Features
• Extended frequency response and very low distortion • Wide, controlled constant directivity dispersion for optimum coverage • Does not suffer from massive loss of energy in the vertical plane at crossover caused by two way discrete designs • UV/weather resistant UL94V-0 ABS construction for structural integrity • Dynamic high frequency protection • Six way self-aligning mounting system • Ferrofluid cooled neodymium high frequency driver • Five year warranty
• • • • • • • • • •
Applications
Foreground music and paging systems Multi-room audio systems Home theatre Business music systems Boardrooms and offices Retail environments Retail outlets and shopping malls Lounges and bars Cruise ships Courtrooms
Complementing any style of decor, the perforated metal grille and discreet moulded baffle can be painted to blend seamlessly with any environment.
Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France
T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473
E:
[email protected] E:
[email protected] E:
[email protected] E:
[email protected]
Tannoy adopts a policy of continuous improvement and product specification is subject to change
iW62TDC data file issue:1.06 // 15.01.08
iw6 TDC
TECHNICAL SPECIFICATIONS System
Frequency Response (-3dB) Frequency Range (-10dB) (1)
(1)
iw6 TDC
Transducers
Dual Concentric™ Point source, constant directivity driver Low Frequency 1 x 165mm (6.50”)
75Hz - 51kHz 36Hz - 54kHz
System Sensitivity (1W @1m) (2) 91dB (1W - 2.83V for 8 Ohms)
High Frequency
Nominal Coverage Angle
90 degrees conical
Supertweeter™
Directivity Factor (Q)
5.6 averaged 1kHz to 6kHz
Physical
Coverage Angle (1kHz to 6kHz) 110 degree conical
Directivity Index (DI)
6.5 averaged 1kHz to 6kHz
Rated Maximum SPL (3) Average Average Peak
110.5dB 109dB (with optional THP60 transformer) 116.5dB
Power Handling Average Programme Peak
90W 180W 360W
8 Ohms
10% Full Power (5.5V) 250Hz 1kHz 10kHz
2nd Harmonic 2.00% 0.33% 0.67%
Distortion
1% Full Power (1.73V) 250Hz 1kHz 10kHz
2nd Harmonic 0.57% 0.08% 0.27%
Crossover
1.8Hz, 16Hz
Clamping Design
Connectors
Hole Cutout Size Dimensions Front baffle
Recommended Amplifier Power 180W @ 8 Ohms Nominal Impedance
Construction
19mm (0.75”) titanium dome with neodymium magnet system 19mm (0.75”) titanium dome with neodymium magnet system
Baffle UL 94V-0 rated ABS Grille Steel, with weather resistant coating Back can Zinc plated steel (optional accessory)
Six way, self aligning security toggle clamp system
Gold plated connectors with spring terminals
271.50 x 168.50mm (10.70 x 6.63”) Maximum wall thickness - 25mm (1.00”)
320 x 209 x 104mm (12.60 x 8.23”) (H x W)
Front of baffle to rear 104mm (4.10”) of magnet assembly 3rd Harmonic 0.12% 0.68% 0.21%
3rd Harmonic 0.14% 0.28% 0.3%
Notes: (1) Average over stated bandwidth. Measured at 1 metre on axis. (2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber
Front of wall to rear 99mm (3.90”) of magnet assembly Net Weight
3kg (6lbs 6oz)
Included Accessories Paint mask, cutout template, grille
Optional Accessories Steel back can Steel back can with THP60 transformer Plaster (mud) ring
Transformer Taps (optional) 70V 60W / 30W / 15W / 7.5W / OFF & Low Impedence operation 100V 60W / 30W / 15W / OFF & Low Impedence operation
A full range of measurements, performance data, CLF and Ease™ Data can be downloaded from www.tannoy.com
Full independent verification of published specifications carried out by NWAA Labs, California can also be obtained from the downloads section of www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal or exceed the published specifications, which Tannoy reserves the right to alter without prior notice. Please verify the latest specifications when dealing with critical applications.
Ordering Information PART NUMBER
8000 3770
Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France
COLOUR
MODEL NAME iw62 TDC
T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473
White
PACKED QUANTITY 1
E:
[email protected] E:
[email protected] E:
[email protected] E:
[email protected]
Tannoy adopts a policy of continuous improvement and product specification is subject to change
iW62TDC data file issue:1.06 // 15.01.08
iw6 TDC
PERFORMANCE MEASUREMENTS 1m on-axis frequency q y response p
100
SPL, 1W/1m (dB)
90
80
70
60
50
ANECHOIC FREQUENCY RESPONSE
10
100
1000
10000
frequency (Hz)
100000
Impedance vs frequency
45 40 35
Impedance (ohms)
30 25 20 15 10 5 0 1
10
100
IMPEDANCE
frequency (Hz)
1000
10000
100000
Horizontal off-axis response 100
90
Level (dB)
80
70
0 deg 10 deg 20deg 30deg 40deg
60
OFF AXIS RESPONSE
Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France
50 10
T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473
100
1000
frequency (Hz)
10000
100000
E:
[email protected] E:
[email protected] E:
[email protected] E:
[email protected]
Tannoy adopts a policy of continuous improvement and product specification is subject to change
iW62TDC data file issue:1.06 // 15.01.08
iw6 TDC
PERFORMANCE MEASUREMENTS Beamwidth vs Frequency
360 330 300 270
Degrees
240 210 180 150 120 90 60 30 0 100
1000
frequency (Hz)
BEAMWIDTH
DI vs Frequency
100
Q Q
10
1 100
1000
frequency (Hz)
DIRECTIVITY INDEX
Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France
10000
T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473
10000
E:
[email protected] E:
[email protected] E:
[email protected] E:
[email protected]
Tannoy adopts a policy of continuous improvement and product specification is subject to change
iW62TDC data file issue:1.06 // 15.01.08
iw6 TDC
PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE) 100 Hz 125 Hz 160 Hz 200 Hz
0 330
30
0
330
-12
300
60
300
-36
90
-48
30
0
270
330
60
300
-36
90
-48
0
270
30
330
0
30
-12
60
-24
300
-36
-24
60
-36
90
-48
T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473
10 kHz 12.5 kHz 16 kHz 20 kHz
0
-12
Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France
90
-48
4 kHz 5 kHz 6.3 kHz 8 kHz
0
270
60
-24
-36
300
30
0 -12
-24
330
1.6 kHz 2 kHz 2.5 kHz 3.15 kHz
0
-12
270
90
-48
630 Hz 800 Hz 1 kHz 1.25 kHz
0
300
60
-24
-36
330
30
0 -12
-24
270
250 Hz 315 Hz 400 Hz 500 Hz
0
270
-48
90
E:
[email protected] E:
[email protected] E:
[email protected] E:
[email protected]
Tannoy adopts a policy of continuous improvement and product specification is subject to change
iW62TDC data file issue:1.06 // 15.01.08
iw6 TDC
PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE) 100 Hz 125 Hz 160 Hz 200 Hz
0 330
30
0
330
-12
300
60
300
-36
90
-48
30
0
270
330
60
300
-36
90
-48
0
270
30
330
0
30
-12
60
-24
300
-36
-24
60
-36
90
-48
T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473
10 kHz 12.5 kHz 16 kHz 20 kHz
0
-12
Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France
90
-48
4 kHz 5 kHz 6.3 kHz 8 kHz
0
270
60
-24
-36
300
30
0 -12
-24
330
1.6 kHz 2 kHz 2.5 kHz 3.15 kHz
0
-12
270
90
-48
630 Hz 800 Hz 1 kHz 1.25 kHz
0
300
60
-24
-36
330
30
0 -12
-24
270
250 Hz 315 Hz 400 Hz 500 Hz
0
270
-48
90
E:
[email protected] E:
[email protected] E:
[email protected] E:
[email protected]
Tannoy adopts a policy of continuous improvement and product specification is subject to change
iW62TDC data file issue:1.06 // 15.01.08
iw6 TDC
DIMENSIONAL SKETCHES 209.0mm 8.25” 209.0
271.5mm 10.69”
320.0mm 12.60” 320.0
271.5
4.9mm 3.89” 4.9
168.5mm 6.63” 168.5
337.0
99.0mm 3.90” 104mm 4.10” 98.9
103.8
iw6TDC TDC--PRE-INSTALLATION PRE-INSTALLATION iw6
209.0mm 8.23”
251.0mm 9.88”
209.0
251.0
271.5mm 10.69”
320.0mm 12.60” 320.0
271.5
4.9mm 3.89” 4.9
168.5mm 6.63” 168.5
Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France
337.0mm 13.27”
T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473
98.9mm 0.19” 103.8mm 4.09” 98.9
103.8
- POST-INSTALLATION iw6 iw6 TDCTDC - POST-INSTALLATION
E:
[email protected] E:
[email protected] E:
[email protected] E:
[email protected]
Tannoy adopts a policy of continuous improvement and product specification is subject to change
iW62TDC data file issue:1.06 // 15.01.08
INWALL BACK CAN ACCESSORY
STUD
WALL COVERING MATERIAL FITTED AFTER BACK CAN HAS BEEN INSTALLED IN POSITION.
12.5 min [0.49"min] 101.6 min [4.00"min] BACK CAN FITTED IN STUD PARTITON 451.0 [17.76"] 89.1 [3.51"]
180.0 [7.09"]
TOP
420.0 [16.54"]
281.0 [11.06"]
477.0 [18.78"]
96.7 [3.81"]
310.0 [12.20"]
Ordering Information PART NUMBER
8000 4020 8000 4230 8000 4250
MODEL NAME iw6 TDC/DS Back Can iw6 TDC/DS Transformer Back Can Pre-install mounting ring for iw6 TDC/TS
Tannoy adopts a policy of continuous improvement and product specification is subject to change
BAFFLE / GRILLE COLOUR Unpainted Steel Unpainted Steel -
PACKED QUANTITY 1 1 -
PACKED WEIGHT
4.00Kgs (8.80lbs) 11.00Kgs (23.1lbs) -
iw6 TDC Architectural specifications
The in wall speaker shall consist of one 165mm (6.50") Dual Concentric™ transducer and one 25mm (1.00”) Supertweter™ mounted in an injection moulded front baffle manufactured from UV/weather resistant UL94V-0 ABS material. The three-way system shall incorporate an optimised low loss crossover network. The wiring terminals shall be gold plated spring loaded connectors. Performance of the in wall speaker shall meet or exceed the following criteria: The system shall have a coverage angle of 110 degrees (1kHz to 6kHz). Frequency response measured on axis shall be 36Hz - 54kHz (-10dB from rated sensitivity, measured in an IEC baffle in an anechoic chamber) with no equalization. Sensitivity shall be 91dB (1W @ 1m). Long term power handling capacity as defined in EIA-426B test shall be 90W, recommended amplifier power 180W @ 8 Ohms. The nominal system impedance shall be 8 Ohms.
In 70V or 100V distributed audio systems the iw6 TDC can be used with the optional the THP60 high performance, low insertion loss transformer with 60, 30, 15 and 7.5W taps* available.
A weather resistant perforated steel grille covers the transducer. Both the grille and baffle shall be paintable. The system shall not exceed the following dimensions: 320 x 209 x 104mm or 12.60 x 8.23 x 4.10” (H x W x D). Hole cutout size shall be 271.50 x 168.50mm or 10.71 x 6.63". The in wall speaker system shall be the.....iw6 TDC.
*70.7 Volt only
Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France
T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473
E:
[email protected] E:
[email protected] E:
[email protected] E:
[email protected]
Tannoy adopts a policy of continuous improvement and product specification is subject to change
iW62TDC data file issue:1.06 // 15.01.08
iw6 TDC
NOTES
Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France
T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473
E:
[email protected] E:
[email protected] E:
[email protected] E:
[email protected]
Tannoy adopts a policy of continuous improvement and product specification is subject to change
iW62TDC data file issue:1.06 // 15.01.08
