Iw62 Tdc

Transcript

iW62_TDC_Data_Sheet_DJ.qxp:Layout 1 12/1/12 12:57 Page 1 iw62 TDC Product Description Features The iw62 TDC is a full bandwidth in wall speaker system, using a 165mm (6.50") Tannoy Dual Concentric™ point source, constant directivity drive unit with an additional 165mm (6.50") bass driver and 25mm (1.00") Tannoy SuperTweeter™. Designed primarily for installation into standard stud partition wall systems, it may also be used in cavity wall installations constructed with standard thickness drywall as well as a wide range of other wall construction types with a surface thickness of up to 25mm (1.00”). The 165mm (6.50") Tannoy Dual Concentric™ drive unit comprises a multi fibre paper pulp mid bass cone and a 25mm (1.00") ferrofluid cooled, titanium dome HF unit with neodymium magnet system. The mid-bass and tweeter sections of this constant directivity driver are coincidentally aligned to a true point source; ensuring a wide and controlled dispersion for optimum coverage; this while avoiding the massive loss of energy, in the vertical plane at the crossover frequency, inherent in two-way discrete designs. An additional acoustically matched 165mm (6.50") bass driver delivers low frequency reinforcement for the Dual, while a 25mm (1.00") titanium dome SuperTweeter™ extends the frequency bandwidth out to over 50kHz. Not only does this further enhance the already class leading, low distortion performance with an exceptionally natural and open soundstage, it also ensures that this is a high output, high impact performer. The iw6 TDC is equipped with dynamic high frequency protection. The drivers and passive frequency dividing network are mounted in an injection moulded, paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material. The class leading performance is further enhanced by the inclusion of eight self aligning, spring loaded clamps; allowing for quick install but also for simple removal or reorientation of the loudspeaker. The rigidity of the clamps and baffle combination crucially provides the acoustically optimum bond to the wall surface without risk of distortion to the baffle itself. Gold plated spring loaded terminals are provided for ease of installation and a steel back can is available as an optional installation accessory. • Extended frequency response and very low distortion • Wide, controlled constant directivity dispersion for optimum coverage • Does not suffer from massive loss of energy in the vertical plane at crossover caused by two way discrete designs • UV/weather resistant UL94V-0 ABS construction for structural integrity • Dynamic high frequency protection • Eight way self-aligning clamp mounting system • Ferrofluid cooled neodymium high frequency driver • Five year warranty Applications • • • • • • • • • • Foreground music & paging systems Multi-room audio systems Home theatre Business music systems Boardrooms and offices Retail environments Retail outlets and shopping malls Lounges and bars Cruise ships Courtrooms Complementing any style of decor, the perforated metal grille and discreet moulded baffle can be painted to blend seamlessly with any environment. Ideally suited to applications requiring the combination of intelligibility, premium sonic quality for music and speech reinforcement and exceptional reliability, the high power handling iw62 TDC is particularly suited to custom AV installations and business music systems. Tannoy Direct (UK) TCGI (ROW sales) TCGA (Americas sales) Tannoy Middle East T: 00 44 (0) 1236 420199 T: 00 45 8742 7000 T: 00 1 (519) 745 1158 T: 00 971 (04) 4401208 E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change iW62TDC data file issue:1.08 // 15.12.10 iW62_TDC_Data_Sheet_DJ.qxp:Layout 1 12/1/12 12:57 Page 2 iw62 TDC TECHNICAL SPECIFICATIONS System iw62 TDC Frequency Response (-3dB) (1) 70Hz - 51kHz Frequency Range (-10dB) (1) 34Hz - 54kHz Transducers Dual Concentric™ Point source constant directivity drive unit Low Frequency 1 x 165mm (6.50”) with multi fibre paper pulp cone High Frequency 19mm (0.75”) titanium dome with neodymium magnet system System Sensitivity (1W @1m) (2) 92dB (1W - 2.83V for 8 Ohms) Nominal Coverage Angle Supertweeter™ 19mm (0.75”) titanium dome with neodymium magnet system Low Frequency 1 x 165mm (6.50”) additional bass driver 90 degrees conical Coverage Angle (1kHz to 6kHz) 120 degrees conical Directivity Factor (Q) 4.6 averaged 1kHz to 6kHz Directivity Index (DI) 6.0 averaged 1kHz to 6kHz Rated Maximum SPL (3) Average Average Peak 112dB 110dB (with optional THP60 transformer) 118dB Power Handling Average Programmed Peak 105W 210W 420W Physical Enclosure Recommended Amplifier Power 210W @ 8 Ohms Nominal Impedance Baffle UL 94V-0 rated ABS Grille Aluminum, with weather resistant coating Optional accessory: Back can Zinc plated steel Clamping Design Eight way self aligning security toggle clamp system Connectors Gold plated connectors with spring terminals Hole Cutout Size 426.10 x 187.6 (16.76 x 7.39”) Maximum wall thickness - 25mm (1.00”) Dimensions Front Baffle 8 Ohms 473.5mm x 227mm (18.64” x 8.94”) (H x W) Front of wall to rear 99mm (3.90”) of magnet assembly Distortion 10% Full Power (5.5V) 250Hz 1kHz 10kHz 2nd Harmonic 0.64% 0.6% 0.69% 3rd Harmonic 0.06% 0.52% 0.06% Net Weight 1% Full Power (1.73V) 250Hz 1kHz 10kHz 2nd Harmonic 0.18% 0.08% 0.27% 3rd Harmonic 0.11% 0.23% 0.17% Optional Accessories Steel back can Steel back can with THP60 transformer Plaster (mud) ring Crossover Passive, 750Hz, 1.8Hz, 16Hz 5kg (11lbs) Included Accessories Painted mask, cutout template, grille Transformer Taps (optional) 70V 60W / 30W / 15W / 7.5W / OFF & Low Impedence operation 100V 60W / 30W / 15W / OFF & Low Impedence operation Notes: (1) Average over stated bandwidth. Measured at 1 metre on axis. (2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber A full range of measurements, performance data, CLF and Ease™ Data can be downloaded from www.tannoy.com Full independent verification of published specifications carried out by NWAA Labs, California can also be obtained from the downloads section of www.tannoy.com Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal or exceed the published specifications, which Tannoy reserves the right to alter without prior notice. Please verify the latest specifications when dealing with critical applications. Ordering Information PART NUMBER 8000 3770 Tannoy Direct (UK) TCGI (ROW sales) TCGA (Americas sales) Tannoy Middle East MODEL NAME iw62 TDC T: 00 44 (0) 1236 420199 T: 00 45 8742 7000 T: 00 1 (519) 745 1158 T: 00 971 (04) 4401208 COLOUR PACKED QUANTITY White 1 E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change iW62TDC data file issue:1.08 // 15.12.10 iW62_TDC_Data_Sheet_DJ.qxp:Layout 1 12/1/12 12:57 Page 3 iw62 TDC PERFORMANCE MEASUREMENTS 1m on-axis frequency response 100 SPL, 1W/1m (dB) 90 80 70 60 50 10 ANECHOIC FREQUENCY RESPONSE 100 1000 10000 100000 frequency (Hz) Impedance vs frequency y 40 35 30 Impedance (ohms) 25 20 15 10 5 0 1 10 100 1000 10000 100000 frequency (Hz) IMPEDANCE Horizontal off-axis response 100 90 Level (dB) 80 70 0 deg 10 deg 20deg 30deg 40deg 60 50 OFF AXIS RESPONSE Tannoy Direct (UK) TCGI (ROW sales) TCGA (Americas sales) Tannoy Middle East 10 100 1000 10000 100000 frequency (Hz) T: 00 44 (0) 1236 420199 T: 00 45 8742 7000 T: 00 1 (519) 745 1158 T: 00 971 (04) 4401208 E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change iW62TDC data file issue:1.08 // 15.12.10 iW62_TDC_Data_Sheet_DJ.qxp:Layout 1 12/1/12 12:57 Page 4 iw62 TDC PERFORMANCE MEASUREMENTS Beamwidth vs Frequency 360 330 300 270 Degrees Degrees 240 210 180 150 120 90 60 30 0 100 1000 10000 frequency (Hz) BEAMWIDTH DI vs Frequency 100 Q Q 10 1 100 1000 10000 Frequency ( Hz ) frequency (Hz) DIRECTIVITY INDEX Tannoy Direct (UK) TCGI (ROW sales) TCGA (Americas sales) Tannoy Middle East T: 00 44 (0) 1236 420199 T: 00 45 8742 7000 T: 00 1 (519) 745 1158 T: 00 971 (04) 4401208 E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change iW62TDC data file issue:1.08 // 15.12.10 iW62_TDC_Data_Sheet_DJ.qxp:Layout 1 12/1/12 12:57 Page 5 iw62 TDC PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE) 100 Hz 125 Hz 160 Hz 200 Hz 0 330 30 0 330 -12 60 300 60 -24 -24 -36 -36 90 -48 270 330 -12 60 300 -24 -36 -36 90 0 270 30 330 0 30 -12 300 60 300 60 -24 -24 -36 -36 90 -48 T: 00 44 (0) 1236 420199 T: 00 45 8742 7000 T: 00 1 (519) 745 1158 T: 00 971 (04) 4401208 10 kHz 12.5 kHz 16 kHz 20 kHz 0 -12 Tannoy Direct (UK) TCGI (ROW sales) TCGA (Americas sales) Tannoy Middle East 90 -48 4 kHz 5 kHz 6.3 kHz 8 kHz 0 270 60 -24 -48 330 30 0 -12 300 270 1.6 kHz 2 kHz 2.5 kHz 3.15 kHz 0 30 0 90 -48 630 Hz 800 Hz 1 kHz 1.25 kHz 0 330 30 0 -12 300 270 250 Hz 315 Hz 400 Hz 500 Hz 0 270 -48 90 E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change iW62TDC data file issue:1.08 // 15.12.10 iW62_TDC_Data_Sheet_DJ.qxp:Layout 1 12/1/12 12:57 Page 6 iw62 TDC PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE) 100 Hz 125 Hz 160 Hz 200 Hz 0 330 30 0 330 -12 60 300 60 -24 -24 -36 -36 90 -48 270 330 -12 60 300 -24 -36 -36 90 0 270 30 330 0 30 -12 300 60 300 60 -24 -24 -36 -36 90 -48 T: 00 44 (0) 1236 420199 T: 00 45 8742 7000 T: 00 1 (519) 745 1158 T: 00 971 (04) 4401208 10 kHz 12.5 kHz 16 kHz 20 kHz 0 -12 Tannoy Direct (UK) TCGI (ROW sales) TCGA (Americas sales) Tannoy Middle East 90 -48 4 kHz 5 kHz 6.3 kHz 8 kHz 0 270 60 -24 -48 330 30 0 -12 300 270 1.6 kHz 2 kHz 2.5 kHz 3.15 kHz 0 30 0 90 -48 630 Hz 800 Hz 1 kHz 1.25 kHz 0 330 30 0 -12 300 270 250 Hz 315 Hz 400 Hz 500 Hz 0 270 -48 90 E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change iW62TDC data file issue:1.08 // 15.12.10 iW62_TDC_Data_Sheet_DJ.qxp:Layout 1 12/1/12 12:57 Page 7 iw62 TDC DIMENSIONAL SKETCHES 98.9mm 98.9 [3.89"] (3.89”) 5.0mm 5.0 [0.20"] (0.20”) 186.5 186.5mm [7.34"] (7.34”) 186.5mm (7.34”) 473.5 473.5mm [18.64"] (18.64”) 425.0 425.0mm [16.73"] (16.73”) 227.0 227.0mm [8.94"] (8.94”) TEMPLATE SIZE- -430mm 430mm x 193mm [16.93" x 7.60"] TEMPLATEHOLE HOLE CUTOUT CUTOUT SIZE X 193mm {16.93” x 7.30”] Tannoy Direct (UK) TCGI (ROW sales) TCGA (Americas sales) Tannoy Middle East T: 00 44 (0) 1236 420199 T: 00 45 8742 7000 T: 00 1 (519) 745 1158 T: 00 971 (04) 4401208 E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change iW62TDC data file issue:1.08 // 15.12.10 iW62_TDC_Data_Sheet_DJ.qxp:Layout 1 12/1/12 12:57 Page 8 iw62 TDC IN WALL BACK CAN ACCESSORY STUD STUD 12.5 min 12.5 min 0.49” min [0.49" min] 101.6min min 101.6 4.00” [4.00"min min] 89.1mm 89.1 3.51” [3.51"] WALL WALL COVERING COVERINGMATERIAL MATERIAL FITTED FITTEDAFTER AFTERBACK BACKCAN CANHAS HAS BEEN BEEN INSTALLED INSTALLEDIN INPOSITION. POSITION. 451.0mm 451.0 17.76” [17.76"] 199.0mm 199.0 7.83” [7.83"] TOP 1143.0 1143.0mm 45.00” [45.00"] 436.0 436.0mm 17.17” [17.17"] 1200.0 1200.0mm 47.24” [47.24"] 96.7 96.7mm 3.81” [3.81"] 310.0mm 310.0 12.20” [12.20"] Ordering Information PART NUMBER 8000 4220 8000 4240 8000 4260 Tannoy United Kingdom Tannoy Deutschland Tannoy France TC|Group Americas MODEL NAME iw62 TDC/TS Back Can iw62 TDC/TS Transformer Back Can Pre-install mounting ring for iw62 TDC/TS T: 00 44 (0) 1236 420199 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473 T: 00 1 (519) 745 1158 BAFFLE / GRILLE COLOUR PACKED QUANTITY PACKED WEIGHT Unpainted Steel Unpainted Steel - 1 1 - 9.50Kgs (20.90lbs) 10.50Kgs (23.1lbs) - E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change iW62TDC data file issue:1.07 // 26.10.02 iW62_TDC_Data_Sheet_DJ.qxp:Layout 1 12/1/12 12:57 Page 9 iw62 TDC Architectural specifications The in wall speaker shall consist of one 165mm (6.50") Dual Concentric™ full range transducer, one 25mm (1.00”) SuperTweeter™ and one 165mm (6.50") bass driver, mounted in an injection moulded front baffle manufactured from UV/weather resistant UL94V-0 ABS material. The three-way system shall incorporate an optimised low loss crossover network. The wiring terminals shall be gold plated spring loaded connectors. Performance of the in-wall speaker shall meet or exceed the following criteria: The system shall have a coverage angle of 120 degrees (1kHz to 6kHz). Frequency response measured on axis shall be 34Hz - 54kHz (-10dB from rated sensitivity, measured in an IEC baffle in an anechoic chamber) with no equalization. Sensitivity shall be 92dB (1W @ 1m). Long term power handling capacity as defined in EIA-426B test shall be 105W, recommended amplifier power 220W @ 8 Ohms. The nominal system impedance shall be 8 Ohms. In 70V or 100V distributed audio systems the iw62 TDC can be used with the optional the THP60 high performance, low insertion loss transformer with 60, 30, 15 and 7.5W taps* available. A weather resistant perforated aluminum grille covers the transducer. Both the grille and baffle shall be paintable. The system shall not exceed the following dimensions: 473.50 x 227 or 18.64 x 8.94 (H x W). Hole cut out size shall be 426.10 x 187.6mm or 16.76 x 7.39" The in wall speaker system shall be the.....iw62 TDC. *70.7 Volt only Tannoy Direct (UK) TCGI (ROW sales) TCGA (Americas sales) Tannoy Middle East T: 00 44 (0) 1236 420199 T: 00 45 8742 7000 T: 00 1 (519) 745 1158 T: 00 971 (04) 4401208 E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change iW62TDC data file issue:1.08 // 15.12.10 iW62_TDC_Data_Sheet_DJ.qxp:Layout 1 12/1/12 12:57 Page 10 iw62 TDC NOTES Tannoy Direct (UK) TCGI (ROW sales) TCGA (Americas sales) Tannoy Middle East T: 00 44 (0) 1236 420199 T: 00 45 8742 7000 T: 00 1 (519) 745 1158 T: 00 971 (04) 4401208 E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change iW62TDC data file issue:1.08 // 15.12.10 iW62_TDC_Data_Sheet_DJ.qxp:Layout 1 12/1/12 12:57 Page 11 iw62 TDC Tannoy Direct (UK) TCGI (ROW sales) TCGA (Americas sales) Tannoy Middle East T: 00 44 (0) 1236 420199 T: 00 45 8742 7000 T: 00 1 (519) 745 1158 T: 00 971 (04) 4401208 E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change iW62TDC data file issue:1.08 // 15.12.10 iW62_TDC_Data_Sheet_DJ.qxp:Layout 1 12/1/12 12:57 Page 12 iw62 TDC Tannoy Direct (UK) TCGI (ROW sales) TCGA (Americas sales) Tannoy Middle East T: 00 44 (0) 1236 420199 T: 00 45 8742 7000 T: 00 1 (519) 745 1158 T: 00 971 (04) 4401208 E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change iW62TDC data file issue:1.08 // 15.12.10