Transcript
IykTek vuqla/kku laLFkku INSTITUTE FOR PLASMA RESEARCH परमाणु ऊजा वभाग का एक वायतशासी संथान, भारत सरकार (An Autonomous Institute of Department of Atomic Energy, Govt. of India) NEAR INDIRA BRIDGE, BHAT DIST. GANDHINAGAR - 382 428 (INDIA) Phone: (079) 2396 2020/2021/2028 Fax : 91-079-23962277 Web : www.ipr.res.in
fudV bfUnjk iqy] HkkV] xka?khuxj&382 &382 428 Hkkjr nwjHkkLk% (079) 2396 2020/2021/2028 QSDLk% 91-079-23962277 osc: www.ipr.res.in
ENQUIRY ENQUIRY NO
: IPR/EQL/17-18/116
Date
: 04-07-2017
Due on
: 24-08-2017 by 1:00 PM IST
Reminder-1 Dt: 28-07-2017 Please send your offer in sealed envelope specifying Enquiry No, Date & Due Date, ALONG WITH your credentials for the following items: Important Note: Please note that e-mail quotations are not acceptable however you may send your queries (if any) to
[email protected] Please ensure your sealed quotation reaches this office not later than above mentioned due date and time. Kindly go through the following documents properly before quoting which are available on the IPR web portal i.e., http://www.ipr.res.in/documents/tender_terms.html / attached herewith. 1) Instructions to the bidders & Terms and conditions (refer Form No: IPR-LP-01.V2) 2) Bidding format QUOTATION SHOULD BE ADDRESSED TO PURCHASE OFFICER ONLY Sr No
Description
Quantity
1
Supply and Installation of HP Proliant Blade for HP Enclosure C7000. All specifications as per attached herewith Note: Please quote with complete technical details (Technical compliance sheet and product data sheet). Encl: As per attachment.
1.0 Nos.
Sd/-
Mr. D. Ramesh Purchase Officer-II Information to Vendors: We are working towards a single platform for our future requirement. Hence, please refer IPR website i.e, http://www.ipr.res.in/documents/tendersenq.html for our future requirement.
PDF processed with CutePDF evaluation edition www.CutePDF.com
Specification of HP Proliant BL 460 G9 (1 Nos.) Sr. No. 1 2 3
Item
Description
CPU Motherboard Memory
4
Hard Disk with carrier Storage Controller Networking features Interfaces Blade server connectivity to SAN Bus Slots
Single Intel Xeon E5-2630v4 (2.2GHz/10-core/20MB/85W) or better Intel C610 Series Chipset or better 32 GB DDR4 Memory with advanced ECC with multi-bit error protection and memory online spare mode 2*600GB hot plug SFF 10K SAS/SSD/SATA drives
5 6 7 8
9 10 11
12
Graphics Industrial Standard Compliance Embedded system management
13
Security
14
Warranty
Integrated PCIe 3.0 based 12G SAS Raid Controller with RAID 0,1 with 1GB of Flash backed write cache onboard Dual port 10Gbps Ethernet ports Minimum of 1*internal USB 3.0 port and 1*internal SDHC card slot Should be capable of supporting 16Gbps Dual port Fiber Channel HBA internal to the Server Blade Minimum of 2Nos. of 3.0 PCIe x16 based mezzanine slots supporting converged Ethernet, Ethernet, FC adapters, SAS and IB adapters Integrated G200eh video controller ACPI 2.0, USB 3.0 support, IPMI 2.0, Secure Digital 2.0,IEEE, AES, 3DES, SNMP, SSL 2.0, Active Directory v1.0, PCIe3.0, ASHRAE A3 Should support service alerting, reporting and remote management with embedded Gigabit out of band management port. Server should support configuring and booting securely with industry standard unified extensible firmware. System should support RESTful API integration. System management should support provisioning servers by discovering and deploying 1 to few servers with intelligent provisioning. System should support embedded remote support to transmit hardware events directly to OEM or an authorized partner for automated phone home support. Power-on password, administrative password, SSL encryption, AES, 3DES, external USB port enable/disable, network server mode 1 years
Note: The above configuration blade server must be compatible with our existing HP enclosure C7000.
Term and Condition: 1. The vendor must submit authorization letter along with their quotation. 2. The vendor is required to quote the make and model and also attach the brochure. 3. The vendor must fill their quoted product details in vendor’s remark column (Annexure-I). 4. The installation and configuration of blade server and hard disk will be done by the vendor.
Annexure-I Specification of HP Proliant BL 460 G9 (1 Nos.) Sr. Item No. 1 CPU 2 3
Motherboard Memory
4
Hard Disk with carrier Storage Controller
5
6 7 8
9
10 11
12
13
Networking features Interfaces Blade server connectivity to SAN Bus Slots
Graphics Industrial Standard Compliance Embedded system management
Security
Description Single Intel Xeon E5-2630v4 (2.2GHz/10core/20MB/85W) or better Intel C610 Series Chipset or better 32 GB DDR4 Memory with advanced ECC with multi-bit error protection and memory online spare mode 2*600GB hot plug SFF 10K SAS/SSD/SATA drives Integrated PCIe 3.0 based 12G SAS Raid Controller with RAID 0,1 with 1GB of Flash backed write cache onboard Dual port 10Gbps Ethernet ports Minimum of 1*internal USB 3.0 port and 1*internal SDHC card slot Should be capable of supporting 16Gbps Dual port Fiber Channel HBA internal to the Server Blade Minimum of 2Nos. of 3.0 PCIe x16 based mezzanine slots supporting converged Ethernet, Ethernet, FC adapters, SAS and IB adapters Integrated G200eh video controller ACPI 2.0, USB 3.0 support, IPMI 2.0, Secure Digital 2.0,IEEE, AES, 3DES, SNMP, SSL 2.0, Active Directory v1.0, PCIe3.0, ASHRAE A3 Should support service alerting, reporting and remote management with embedded Gigabit out of band management port. Server should support configuring and booting securely with industry standard unified extensible firmware. System should support RESTful API integration. System management should support provisioning servers by discovering and deploying 1 to few servers with intelligent provisioning. System should support embedded remote support to transmit hardware events directly to OEM or an authorized partner for automated phone home support. Power-on password, administrative
Vendor’s Remark
14
Warranty
password, SSL encryption, AES, 3DES, external USB port enable/disable, network server mode 1 years
Note: 1. The above configuration blade server must be compatible with our existing HP enclosure C7000. 2. The vendor must fill their quoted product details in vendor’s remark column (Annexure-I). 3. The installation and configuration of blade server and hard disk will be done by the vendor.
