Transcript
JBOD for Smart Rack APPLICATIONS : Datacenter Infrastructure • Cloud Datacenter • Academic Datacenter • Telecom Datacenter
J230-21R
Features : • 30 hot-swap drive bays in a 2U for high density storage • Sliding and locking mechanism on both drive drawers (15 drive bays per drawer) • Tool-less tray supports quick installation and easy maintenance • Intelligent enclosure management • Scalability up to 150 drives via 4 cascaded JBODs
• FRONT VIEW •
• REAR VIEW •
Supports hot swap 30 x 3.5” drives
2 x Mini SAS HD (SFF-8644)
Power connectors
Power distribution board Guide pin
SPECIFICATIONS
STORAGE SOLUTIONS GROUP
General
19
Drives Supported
Administration / Management
Hot swap and Redundancy
Number of Expander
1
Expander Chip
1 x LSI SAS3x40
Host/Expansion Interface
2 x Mini SAS HD (SFF-8644)
Drive Interface
12Gb & 6Gb SAS 6Gb SATA
Form Factor
3.5” (fits 2.5” with use of screws)
Admin/Firmware Upgrade
In-band & Serial port interface Intelligent Enclosure Management port
LED Indicators, Audible Alarm
Yes
Disk Drive
Hot swap 30-bay
Cooling
Centralized cooling included in the rack. Refer to the rack spec for details.
Power Supply
Centralized power design included in the rack. Refer to the rack spec for details.
Power Entry
Centralized power design included in the rack. Refer to the rack spec for details.
Physical Specification
Dimensions (W x D x H) (with chassis ears)
mm : 569.15 x 886.95 x 88
Gross Weight (w/o PSU, Rail & Disks)
kgs : 28
Packaging Dimensions (W x D x H)
mm : 1116 x 697 x 260
inches : 22.4 x 34.9 x 3.5
lbs : 61.7
inches : 43.9 x 27.4 x 10.2
www.aicipc.com Remark: All specifications and photos are subject to change without notice.
© 2015 AIC Inc. All rights reserved.
